Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Nettoyage de la batterie et des bornes
Dépose de la batterie
La corrosion et la saleté accumulées sur la
batterie et les bornes peuvent provoquer une
perte de puissance.
1. Soulevez le siège et tournez-le complètement
vers l'avant jusqu'à ce qu'il repose sur son
axe.
2. Déposez le boulon et l'écrou du support de
batterie et retirez le support de la batterie.
3. À l'aide d'une clé, débranchez le câble de
batterie NOIR puis le câble ROUGE.
4. Retirez avec précaution la batterie de la
tondeuse et nettoyez-la si nécessaire.
5. Rincez la batterie avec de l'eau ordinaire et
séchez-la.
6. Nettoyez les bornes et les extrémités des
câbles de batterie avec une brosse en métal.
7. Réinstallez la batterie avec les bornes dans
la même position qu'avant la dépose.
8. Branchez d'abord le câble de batterie
ROUGE à la borne positive (+) de la batterie.
9. Branchez ensuite le câble de masse NOIR à
la borne négative (-) de la batterie.
10. Fixez la batterie en place avec le support
déposé à l'étape 2.

Batterie

Si la batterie est trop faible pour démarrer le
moteur, elle doit être rechargée.
Utilisation des câbles de démarrage
1. Branchez chaque extrémité du câble ROUGE
à la borne POSITIVE (+) de chaque batterie
en prenant garde à ne pas provoquer un
court-circuit contre le châssis.
2. Branchez une des extrémités du câble NOIR
à la borne NÉGATIVE (-) de la batterie
complètement chargée.
3. Branchez l'autre extrémité du câble NOIR à
un bon CHÂSSIS DE TERRE de la tondeuse
dont la batterie est déchargée, loin du
réservoir de carburant et de la batterie.
Procédez dans l’ordre inverse pour retirer les
câbles.
1. Commencez par débrancher le câble NOIR
du châssis, puis de la batterie complètement
chargée.
2. Débranchez le câble ROUGE des deux
batteries en dernier.
La tondeuse est équipée d'une batterie spéciale
ne nécessitant aucun entretien. Cependant,
une charge périodique de la batterie avec un
chargeur de batterie pour automobile augmente
la durée de vie de la batterie.
Maintenez la batterie et les bornes propres.
Maintenez les boulons de la batterie bien
serrés.
Référez-vous au tableau pour des temps de
charge.
STD
BATTERIE
ÉTAT
DE
CHARGE
TEMPS DE CHARGE APPROXIMATIF DE
LA BATTERIE*
JUSQU'À PLEINE CHARGE À 26,5°C
(80
O
F
)
Taux maximum à :
50 Amps 30 Amps 20 Amps 10 Amps
12,6V 100%
- CHARGE
COMPLÈTE -
12,4V 75 % 20 min. 35 min. 48 min. 90 min.
12,2V 50 % 45 min. 75 min. 95 min. 180 min.
12,0V 25 % 65 min. 115 min. 145 min. 280 min.
11,8V 0 % 85 min. 150 min. 195 min. 370 min.
*Le temps de charge dépend de la capacité,
de l'état, de l'âge, de la température de la batterie et des
performances du chargeur
143

ENTRETIEN

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results