Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Calendrier de maintenance
Voici une liste des procédures de maintenance
à eectuer sur la machine. Consultez un atelier
d'entretien agréé pour les points non décrits dans
ce manuel. An d'assurer un fonctionnement

= Décrit dans ce manuel

= Non décrit dans ce manuel

= Reportez-vous au manuel du fabricant du

moteur
1)
Premier changement au bout de 8 à
10 heures. Si vous manipulez des charges
importantes ou travaillez à température
élevée, procédez au remplacement toutes les
50 heures.
2)
Dans des conditions poussiéreuses, nettoyez
et remplacez plus souvent.
3)
Eectué par un atelier d'entretien agréé.
optimal et une utilisation en toute sécurité, il est
recommandé de coner chaque année votre
machine à un atelier d'entretien agréé.
Consultez la section Entretien général du
chapitre Sécurité.
AVERTISSEMENT ! Avant de procéder
à toute réparation ou à un réglage :
Serrez le frein de stationnement.
Placez l'interrupteur de lame en position de
débrayage.
Placez l'interrupteur d'allumage en position
OFF, puis retirez la clé.
Veillez à ce que les lames et tous les
éléments mobiles soient tout à fait
immobiles.
ENTRETIEN
QUOTIDIENNEMENT
AU MOINS
UNE FOIS
PAR AN
INTERVALLE DE
MAINTENANCE
EN HEURES
AVANT APRÈS 25 50 100 300
CONTRÔLE
Réglage du frein de stationnement

● ♦ ♦

Niveau de l'huile moteur (à chaque
plein)
Système de sécurité
Contrôle de l'absence de fuites d'huile et
de carburant
Contrôle de l'absence de dégâts
Contrôle du matériel de xation (vis,
écrous, etc.)
Contrôle de l'absence de dégâts au
niveau de l'unité de coupe
Pression des pneus

● ● ● ●

Connexions de batterie

● ● ● ● ●

NETTOYER
Prise d'air de refroidissement du moteur
Sous l'unité de coupe
Autour du moteur
Autour des courroies, poulies de
courroie

♦ ♦

Prise d'air de refroidissement du moteur
2)
Préltre du ltre à air (mousse)
2)
Cartouche du ltre à air (ltre en papier)
2)
AUTRES
Inspectez le silencieux/la grille
antiamme

♦ ♦ ♦ ♦

Démarrez le moteur et les lames,
vériez l'absence de bruits anormaux
Aûtez
3)
/Remplacez les lames de la
tondeuse
141

ENTRETIEN

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results