Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Pédale de hauteur de coupe

Trajectoire

Si la trajectoire de la tondeuse n'est pas droite, il
convient de vérier la pression des deux pneus
arrière. La pression d'air préconisée pour les
pneus arrière est de 15 psi (1 bar).
1. Pour régler l'alignement, il faut utiliser les
boulons de réglage de la trajectoire.
2. Pour eectuer le réglage préliminaire de la
trajectoire, déplacez la tondeuse sur une
surface bien dégagée, comme un parking
vide ou un champ.
3. Tournez les boulons de trajectoire au
maximum.
4. Dévissez les boulons de trajectoire de 4 tours
complets. Au-delà de 4 tours, la machine peut
être endommagée.
5. Faites un essai de fonctionnement de la
machine en la conduisant à plein régime et
en mettant les deux leviers de commande
de la transmission sur la position de pleine
marche avant. Serrez progressivement le
boulon de trajectoire situé à droite jusqu'à ce
que la machine commence à virer à droite.
6. Avancez à plein régime avec les deux
leviers de commande de la transmission
en position de pleine marche avant. Serrez
progressivement le boulon de trajectoire (du
côté gauche) jusqu'à ce que la machine aille
tout droit.

Leviers hydrauliques

Les leviers de dérivation de transmission doivent
être enclenchés lorsque vous poussez ou tirez la
machine. Les transmissions sont mises en mode
dérivation en tournant les leviers en position
horizontale. Les leviers de dérivation sont situés
à l'avant des deux transmissions. Voir Transport
manuel dans la section Fonctionnement.
INFORMATION IMPORTANTE Pour le transport,
il convient de toujours lever le plateau à sa
position la plus haute.

Réservoir de carburant

Lisez les consignes de sécurité avant d'eectuer
un plein de carburant. Le réservoir a une
contenance de 19 litres (5 gallons).
Vériez régulièrement que le joint du bouchon
du réservoir n'est pas endommagé et que le
bouchon est bien serré.
La hauteur de coupe souhaitée est réglée à
l'aide de la goupille de hauteur. La pédale de
hauteur de coupe relâche le dispositif de levage
du plateau pour placer celui-ci à la hauteur
sélectionnée.
Pour le transport, appuyez au maximum sur la
pédale de levage jusqu'à ce que le levage de
l'unité arrive dans la position de transport la plus
haute.
135

COMMANDES

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results