Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Engrasadores Zerk del volante y el

equipo

Utilice únicamente grasa para cojinetes de
buena calidad. La grasa de marcas prestigiosas
(empresas petroquímicas, etc.) suele ofrecer una
buena calidad.
Soporte de las ruedas delanteras
Aplique lubricación en tres o cuatro disparos con
una pistola de engrase en cada grupo de soporte
de las ruedas.
Cojinetes de las ruedas delanteras
Lubrique en tres o cuatro disparos con una
pistola de engrase en cada grupo de cojinetes de
las ruedas.
Ejes del equipo
Baje completamente el equipo de corte.
Si se utiliza una pistola de engrase sin manguera
de goma, debe retirarse la placa de los pies para
acceder al eje central.
Lubrique utilizando una pistola de engrase: 2-3
disparos por eje.

Cambio del aceite del motor

NOTA: Cambie el aceite del motor cuando el
motor esté caliente. Consulte el manual de
instrucciones del motor para obtener información
sobre el procedimiento adecuado para cambiar
el aceite y el ltro.
ADVERTENCIA: El tapón de vaciado del
motor se encuentra cerca del silenciador. Para
evitar quemaduras, el motor debe pararse y
dejarse enfriar un poco para que el motor siga
estando caliente, y las supercies contiguas y
el aceite se hayan enfriado.
1. Aparque en una supercie lisa. Accione el
freno de estacionamiento.
2. Limpie la suciedad y los residuos de la zona
alrededor del tapón de llenado de aceite.
3. Quite el tapón/la varilla de nivel.
4. Localice la manguera de vaciado en la
parte trasera derecha del motor. Coloque un
recipiente lo sucientemente grande debajo
del extremo de la manguera de vaciado y
quite el tapón de vaciado de aceite.
5. Deje que salga todo el aceite usado del
motor.
6. Vuelva a colocar el tapón de la manguera de
vaciado y apriételo.
7. Llene el motor con un aceite nuevo hasta la
parte inferior de la rosca del tubo de llenado.
Controle el nivel con la varilla de nivel.
8. Vuelva a colocar y apriete el tapón de llenado
de aceite cuando el nivel de aceite haya
alcanzado la marca FULL (lleno).
9. Para desechar el aceite usado, consulte los
reglamentos locales sobre eliminación de
residuos.
10. Consulte el apartado Programa de
mantenimiento para obtener información
sobre los intervalos de comprobación y
cambio del aceite.
109

LUBRICACIÓN

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results