Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

General

Retire la llave de contacto para evitar accidentes
durante la lubricación.
Cuando utilice una lata de aceite para lubricar,
debe estar llena de aceite de motor.
Cuando utilice grasa para lubricar, a menos que
se especique lo contrario, utilice únicamente
grasa de disulfuro de molibdeno de alta calidad.
Si se usa diariamente, la máquina debe
lubricarse dos veces a la semana.
Limpie el exceso de grasa después de la
lubricación.
Es importante evitar que el lubricante entre en
contacto con las correas o con las supercies de
empuje de las poleas de la correa. En caso de
que esto suceda, limpie con alcohol. Si la correa
sigue resbalando después de haberla limpiado,
deberá cambiarla. No debe utilizar gasolina ni
otros productos derivados del petróleo para
limpiar las correas.

Aceites hidráulicos recomendados

Si se utiliza continuamente aceite Parker™ HT-
1000, el aceite y los ltros deben cambiarse cada
750 horas.
Si se utilizan aceites Castrol™ Syntec 5W-50,
Amsoil AW ISO 68 o Shell™ TTF-SB, el aceite

Programa de lubricación

y los ltros deben cambiarse cada 500 horas
después del cambio inicial de aceite y ltro de
750 horas.
Si se utiliza un aceite de motor sintético de
primera calidad con un grado de viscosidad
mínimo de 15W40, el aceite y los ltros deben
cambiarse cada 250 horas después del cambio
inicial de aceite y ltro de 750 horas.
INFORMACIÓN IMPORTANTE: Utilice una
lubricación mínima y retire el exceso de
lubricante para que no entre en contacto con
las poleas o con las supercies de empuje de
las poleas de la correa.
ADVERTENCIA: La fuga de aceite
hidráulico a presión puede tener la fuerza
suciente como para penetrar en la piel y
causar heridas graves. En caso de resultar
herido, vea a un médico inmediatamente.
Puede producirse una infección o una
reacción grave si no se administra de
inmediato el tratamiento médico adecuado.
12/12 Cada año
1/52 Cada semana
1/365 Todos los días
Utilice una pistola de
engrase para lubricar
Cambio de ltro
Cambio de aceite
Comprobación de nivel

*

Primer cambio del aceite hidráulico
y del ltro tras 100 horas de
funcionamiento; luego, cada 400 horas.
Cambie el aceite del motor cada
50 horas.
108

LUBRICACIÓN

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results