Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Ajuste del equipo de corte

Nivelación del equipo
Ajuste el equipo cuando el cortacésped se
encuentre en una supercie plana. Asegúrese de
que los neumáticos están inados a la presión
correcta. Consulte Presión de los neumáticos,
en la sección Mantenimiento. Si los neumáticos
están poco o demasiado inados, el equipo no
se podrá ajustar bien. Los ajustes incorrectos del
equipo de corte producirán un corte irregular.
Cuatro ranuras controlan la altura y el paso
del equipo de corte. El equipo debe ajustarse
con una altura ligeramente superior en la parte
trasera.
NOTA: Para garantizar la precisión del
procedimiento de nivelación, la correa de
transmisión del equipo de corte debe instalarse
antes de nivelar el equipo.
1. Utilice siempre guantes protectores. Gire la
punta de cada cuchilla exterior para alinearla
con el equipo lateralmente.
2. Realice una medición desde la supercie del
suelo hasta la parte inferior de la punta de la
cuchilla en el lado de descarga del equipo de
corte. Anote esta medida. Compruebe que la
medida del otro lado sea igual. Si es preciso
realizar ajustes, aoje la contratuerca de la
parte superior de las articulaciones traseras
y ajústela hasta que ambas mediciones
laterales sean iguales. Anote la medida.
3. Gire las dos cuchillas exteriores para
alinearlas longitudinalmente con el equipo.
Desplace los tornillos de montaje delanteros
hacia arriba o hacia abajo hasta que
las puntas traseras de las cuchillas se
encuentren entre 3,175 mm y 9,525 mm (1/8
y 3/8 pulg.) más altas en la parte trasera que
las puntas delanteras de las cuchillas.
4. Conrme las medidas de nuevo. La altura de
las puntas de las cuchillas debe ser igual en
ambos lados. En la parte trasera, las puntas
de las cuchillas deben estar entre 3,175 mm
y 9,525 mm (1/8 y 3/8 pulg.) más altas que la
medida delantera. En la parte delantera, las
puntas de las cuchillas deben estar igual en
ambos lados.
NOTA: Esto hará que el equipo de corte esté en
una posición de medición estándar. Dependiendo
del tipo de hierba que se vaya a cortar o de las
condiciones ambientales, es posible que deban
realizarse algunos ajustes adicionales para lograr
el corte deseado.

Tren motriz

El mantenimiento periódico del exterior del tren
motriz debe incluir lo siguiente:
1. Compruebe el nivel de aceite de las
transmisiones. Con el motor frío, el nivel de
aceite debe tocar la parte inferior de cada
varilla de nivel de aceite de la transmisión.
2. Inspeccione la correa de transmisión del
vehículo, las poleas tensoras y los muelles
tensores. Asegúrese de que la correa
no pueda patinar. Si la correa patina, las
transmisiones podrían recibir un régimen de
entrada bajo.
Sustitución de la cuchilla
1. Retire el tornillo de la cuchilla girándolo hacia
la izquierda.
2. Instale las cuchillas nuevas o realadas con
la cara que lleva la impresión "GRASS SIDE"
(lado de la hierba) mirando al suelo/hierba
(hacia abajo) o con la impresión "THIS SIDE
UP" (este lado hacia arriba) apuntando al
equipo y a la carcasa de la cortadora.
3. Instale y apriete correctamente el tornillo de
la cuchilla.
4. Apriete el tornillo de la cuchilla a 61-75 Nm
(45-55 libras/pies).
INFORMACIÓN IMPORTANTE: El tornillo
especial de la cuchilla ha recibido un
tratamiento térmico. Sustitúyalo por un
perno de Husqvarna si fuera necesario. No
utilice tornillería de categoría inferior a la
especicada.
106

MANTENIMIENTO

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results