Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448
Instalación de la correa del equipo
NOTA: Para saber cómo instalar fácilmente
la correa del equipo, consulte la etiqueta de
colocación que hay en la parte superior del
equipo.
1. Enrolle la correa del equipo alrededor de la
polea del embrague eléctrico situada en el
eje del motor.
2. Lleve la correa hacia delante y por encima
del equipo.
3. Coloque la correa alrededor de la polea
tensora.
4. Enrolle la correa alrededor de la polea
tensora inmóvil y alrededor de los
recubrimientos del mandril.
5. Empújela hacia dentro en el brazo de la
polea tensora y, con cuidado, pase la correa
por encima de la polea tensora inmóvil.
Cuando la correa esté bien instalada, suelte
lentamente el brazo de la polea tensora para
tensar la correa.
6. Asegúrese de que la correa está colocada
según la etiqueta del equipo y no está
retorcida.
7. Vuelva a instalar la protección de la correa.

Correa de la bomba

La tensión de la correa de transmisión
es ajustable. El muelle tensor debe estar
comprimido a una longitud de entre 35 mm y
38 mm (1,38 y 1,50 pulg.).
Cambio de la correa de la bomba
Aparque el cortacésped en una supercie plana.
Acople el freno de estacionamiento moviendo los
mandos de conducción hacia afuera.
Retirada de la correa
Desde la parte superior del equipo:
1. Quite la correa del equipo (consulte Retirada
de la correa del equipo en este apartado del
manual).
2. Abata el asiento hacia delante para acceder
a las cubiertas del ventilador. Quite ambas
cubiertas del ventilador.
Desde la parte inferior del equipo:
3. Quite el ador del embrague para acceder a
la correa.
4. Aoje las tuercas del muelle tensor en el
cáncamo para desplazar el brazo y aojar la
correa.
5. Saque la correa de las poleas del motor y de
la bomba. Levante la correa sobre la parte
superior de los ventiladores.
Instalación de la correa
1. Si la bomba no está bloqueada en la
posición extendida, repita el paso 4 de las
instrucciones anteriores.
2. Pase la correa por encima de los ventiladores
y colóquela entre las poleas tensoras.
3. Coloque la correa por encima de las poleas
tensoras derecha e izquierda.
4. Coloque la correa sobre la polea del motor.
5. Instale y apriete el ador del embrague.
6. Ajuste el tensor del elevador de la correa
de transmisión para lograr una longitud de
muelle de entre 35 mm y 38 mm (1,38 y 1,50
pulg.).
7. Instale las protecciones de los ventiladores.
8. Instale la correa del equipo.

Discos de corte

PRECAUCIÓN: Las cuchillas están
aladas. Protéjase las manos con guantes
o envuelva las cuchillas con trapos
gruesos cuando las manipule.
El alado de las cuchillas debe
encomendarse un taller de servicio
ocial.
Para obtener el mejor resultado posible de corte,
es importante que las cuchillas no estén dañadas
y estén bien aladas.
Cambie las cuchillas que se hayan doblado o
agrietado al golpearse con algún obstáculo.
Deje que el taller de servicio determine si la
cuchilla puede repararse o alarse, o si debe
sustituirse. Equilibre las cuchillas una vez
aladas.
Compruebe la jación de las cuchillas.
105

MANTENIMIENTO

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results