Husqvarna Z 448 manual

Husqvarna Z 448
7.5 · 1
PDF manual
 · 244 pages
English
manualHusqvarna Z 448

Movimiento manual de la máquina

Al empujar o tirar del cortacésped, accione
las palancas de derivación. Las palancas de
derivación se encuentran en la parte delantera
de cada transmisión.
1. Baje el equipo si es necesario.
2. Mueva los mandos de conducción hacia
dentro, fuera de la posición de freno de
estacionamiento.
3. Levante el asiento.
4. Gire cada palanca de derivación a la posición
horizontal.
5. Baje el asiento.
6. Empuje el cortacésped aprovechando la
robustez de su estructura. No empuje el
cortacésped con las palancas de control.
7. Para volver a acoplar la transmisión, gire las
palancas de derivación a la posición vertical.
Para cargar la máquina en un camión o
remolque, utilice rampas y la marcha lenta. NO
LEVANTE LA MÁQUINA. Esta máquina no está
diseñada para ser elevada manualmente.
Evite cortar el césped cuando esté mojado.
El resultado de corte empeora, dado que las
ruedas se hunden en el césped blando, se
forman terrones y la hierba se agarra debajo
de la cubierta.
Limpie por debajo el equipo de corte con
manguera después de cada uso. Para
limpiarlo, el equipo de corte debe estar elevado
en la posición de transporte. Asegúrese de que
el cortacésped esté frío y el motor apagado.
Utilice aire comprimido para limpiar la
supercie superior del equipo. Evite pulverizar
agua en la supercie superior, sobre el motor y
los componentes eléctricos.
Cuando utilice el kit triturador, es importante
que los intervalos de corte sean frecuentes.
ADVERTENCIA: Después de
conectar las derivaciones y de mover los
controles de dirección para soltar el freno
de estacionamiento, la unidad puede rodar
libremente y podría lesionar a alguien.
ADVERTENCIA: Tenga especial
cuidado al subir la máquina a un camión o
remolque mediante rampas. Si la máquina
se cae de las rampas, pueden producirse
lesiones graves e incluso la muerte.
ADVERTENCIA: No haga ningún ajuste
a menos que:
El motor esté parado.
La llave de contacto está quitada.
El freno de estacionamiento esté activado.
100

FUNCIONAMIENTO

View the manual for the Husqvarna Z 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 448 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Husqvarna Z 448 is a lawnmower designed for residential use. It features a 48-inch cutting deck made of durable materials for long-lasting performance. The lawnmower is powered by a reliable engine that provides sufficient power for cutting grass effectively. With a hydrostatic transmission, the Husqvarna Z 448 offers smooth and effortless operation, allowing users to easily maneuver around obstacles in the yard. The lawnmower is equipped with comfortable seating and ergonomic controls for user convenience. It also has adjustable cutting heights to accommodate different grass lengths. The Husqvarna Z 448 is designed to provide a clean and precise cut, leaving the lawn looking well-maintained. Additionally, it has a compact design for easy storage when not in use. Overall, the Husqvarna Z 448 is a practical and efficient option for homeowners looking to maintain their lawn with ease.

General
BrandHusqvarna
ModelZ 448
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 448 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How do I engage the park brake on the Husqvarna Z 448 lawnmower?

To engage the park brake on the Husqvarna Z 448 lawnmower, follow these steps: 1. Stop the engine. 2. Remove the ignition key. 3. Ensure the park brake is engaged. 4. Avoid making any adjustments unless the engine is stopped and the ignition key is removed. 5. Be cautious when loading the machine onto a truck or trailer using ramps to prevent any potential injuries. 6. Remember that once the bypasses are engaged and the steering controls are moved to release the parking brake, the unit is free to roll and may cause harm. 7. Use extra care when operating the park brake to ensure safety for yourself and others. 8. Always refer to the operator manual for detailed instructions and safety precautions.

What should I do if the throttle is not responding on the Husqvarna Z 448 lawnmower?

If the throttle is not responding on the Husqvarna Z 448 lawnmower, follow these steps: 1. Check if the throttle control is not stuck or obstructed. 2. Inspect the throttle cable for any damage or disconnection. 3. Ensure that the throttle linkage is properly connected and functioning. 4. Verify that the throttle lever on the engine is moving freely. 5. Clean any debris or dirt around the throttle mechanism. 6. Lubricate the throttle cable and linkage if necessary. 7. If the issue persists, consult a professional for further inspection and repair.

Is the manual of the Husqvarna Z 448 available in English?

Yes, the manual of the Husqvarna Z 448 is available in English .

Is your question not listed? Ask your question here

No results