Husqvarna Z 254F manual

Husqvarna Z 254F
7.5 · 1
PDF manual
 · 72 pages
English
manualHusqvarna Z 254F
62

LUBRICACIÓN

Engrasadores de rueda y equipo

Utilice únicamente grasa para cojinetes de
buena calidad. La grasa de marcas reconocidas
(empresas petroquímicas, etc.) generalmente
mantiene una buena calidad.
Montaje de la rueda delantera
Lubrique las carreras 3-4 con una pistola de
engrase en cada juego de cojinetes de las
ruedas.
Cojinetes de las ruedas delanteras
Lubrique las carreras 3-4 con una pistola de
engrase en cada juego de cojinetes de las
ruedas.
Ejes del equipo
Baje el equipo de corte completamente. Lubrique
con una pistola de engrase, 2-3 recorridos por
el eje a través las aberturas que hay en las
protecciones de la correa.
Si usa una pistola de engrase sin manguera de
goma, debe retirar la placa de pie para acceder al
eje central.

Cambio de aceite del motor

NOTA: Cambie el aceite del motor cuando
el motor esté caliente. Consulte el manual
del propietario del motor para ver las
recomendaciones para realizar un cambio de
aceite y de ltro adecuado.
ADVERTENCIA! Para prevenir
quemaduras, se debe apagar el motor y dejar
que se enfríe un poco para que aún esté
caliente, pero para que las áreas que rodean
el motor no lo estén.
1. Estacione la máquina en una supercie
nivelada. Aplique el freno de estacionamiento.
2. Limpie la suciedad y los desechos del área
alrededor de la tapa del tanque de llenado de
aceite.
3. Quité la tapa/varilla de nivel.
4. Ubique la manguera de drenado que se
encuentra al lado trasero derecha del
motor. Ponga un contenedor de un tamaño
adecuado bajo el extremo de la manguera de
drenado y quite el tapón de vaciado de aceite.
5. Permita que el aceite se drene
completamente del motor.
6. Vuelva a poner el tapón de la manguera de
drenado y apriétela rmemente.
7. Llene el motor con un aceite nuevo hasta
la parte de abajo de las marcas del tubo de
llenado. Compruebe el nivel con la varilla de
nivel.
8. Vuelva a poner la tapa del tanque de llenado
de aceite rmemente cuando el nivel de
aceite indique FULL.
9. Consulte el historial de mantenimiento para
ver los intervalos de cambio y de vericación
del aceite.

Transmisión

La transmisión no necesita mantenimiento ni
comprobaciones de nivel o cambios de aceite.
Si se produce una fuga, reemplace la unidad
o póngase en contacto con su distribuidor
Husqvarna.

View the manual for the Husqvarna Z 254F here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254F or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
Tom GibbsMarch 8, 2024

How to remove the brake interlock switch

The Husqvarna Z 254F is a lawnmower designed for efficient grass cutting. It features a 54-inch cutting deck made of reinforced steel, providing durability and stability during operation. The mower is equipped with a 26 HP Kohler engine, ensuring powerful performance for both residential and commercial use. The hydrostatic transmission enables smooth speed adjustment without the need to change gears. The lawnmower is designed with air induction mowing technology, which improves airflow within the deck, resulting in a cleaner and more even cut. The high-back seat and ergonomic steering wheel provide a comfortable and easy-to-control riding experience. The Husqvarna Z 254F also comes with a pedal-operated deck lift system for convenient cutting height adjustment. Additionally, the lawnmower features a removable foot pan for easy access to the deck and engine maintenance. The heavy-duty frame and cast iron blade spindles enhance the overall durability of the machine. Overall, the Husqvarna Z 254F is a reliable and efficient lawnmower suitable for various grass cutting needs.

General
BrandHusqvarna
ModelZ 254F
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254F below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How should I properly load the lawnmower onto a trailer or truck using full-width ramps?

To properly load the Husqvarna Z 254F lawnmower onto a trailer or truck using full-width ramps, follow these steps: 1. Drive the machine slowly up the ramps without lifting it by hand. 2. Engage the hydro bypass levers on both sides and pull both steering/park brake controls inwards to manually push the machine if needed. 3. Be cautious as you load the machine onto the trailer or truck using ramps to avoid the risk of injury or accidents. 4. Ensure that the machine is correctly fastened to the transport vehicle to prevent tipping over during transport. 5. Always reverse the machine onto the transport vehicle to enhance stability and safety. 6. Do not exceed the maximum recommended operation angle of 10 degrees when loading or removing the machine. Remember to use full-width ramps and exercise extreme care to prevent any mishaps during the loading process.

What precautions should I take when transporting the lawnmower on roads to ensure safety?

When transporting the Husqvarna Z 254F lawnmower on roads, follow these precautions for safety: 1. Ensure the fuel filler cap is tightly mounted and no flammable substances are kept in an open vessel. 2. Disconnect the grounding cable from the battery first and reconnect it last to prevent sparking. 3. Use full-width ramps for loading the machine into a trailer or truck. 4. Secure the machine with front and rear tie-down straps directed down and out from the machine. 5. Check and comply with local traffic regulations before transporting the machine on roads. 6. Use an approved trailer to transport the machine and turn off the fuel supply. 7. Do not tow the machine or tow trailers with the mower to avoid damage and injuries. 8. Load the unit onto the truck or trailer by driving up ramps of sufficient strength using a slow speed; do not lift the machine by hand. 9. Always reverse the machine onto the transport vehicle to prevent tipping over during transport.

Is the manual of the Husqvarna Z 254F available in English?

Yes, the manual of the Husqvarna Z 254F is available in English .

Is your question not listed? Ask your question here

No results