Husqvarna Z 254F manual

Husqvarna Z 254F
7.5 · 1
PDF manual
 · 72 pages
English
manualHusqvarna Z 254F
58

MANTENIMIENTO

Correas en V

Revíselas cada 100 horas de funcionamiento.
Revise si hay grietas profundas y mellas grandes.
NOTA: La correa mostrará algunas pequeñas
grietas en la operación normal.
Las correas no son ajustables. Reemplace las
correas si empiezan a deslizarse por desgaste.
Extracción de la correa del equipo
1. Estacione la máquina en una supercie
nivelada. Aplique el freno de estacionamiento.
2. Baje el equipo a la posición de corte más
baja.
3. Quite los pernos de las protecciones de la
correa y quite las protecciones.
4. Retire cualquier resto de suciedad o hierba
que se pueda haber acumulado alrededor
de los alojamientos de la cortadora y toda
supercie del equipo.
5. Presione hacia adentro el brazo guía para
liberar la tensión de la correa.
6. Levante con cuidado la correa hacia la parte
superior de las poleas de la carcasa de la
cortadora y quite la correa del equipo.
Instalación de la correa del equipo
NOTA: Para facilitar la instalación de la cinta de la
plataforma, consulte la etiqueta sobre la ruta que
está en la parte superior del equipo.
1. Envuelva la correa del equipo alrededor de
la polea del embrague eléctrico que está
ubicada en el eje del motor.
2. Pase la correa hacia adelante y hacia arriba
en el equipo.
3. Coloque la correa alrededor de la polea
tensora de resorte.
4. Enrolle la correa alrededor de la polea tensora
ja y de los alojamientos del mandril.
5. Empuje hacia dentro el brazo guía y dirija
cuidadosamente la correa sobre la polea
tensora ja. Una vez que correa está
correctamente instalada, suelte lentamente
del brazo guía para tensar la correa.
6. Vuelva a revisar la ruta de la cinta para
asegurarse de que coincida con la etiqueta
sobre la ruta, y que la cinta no esté torcida.
7. Ajuste a la guía de la correa suelta en el
agujero del brazo polea y apriete el perno de
la polea.
8. Vuelva a colocar las protecciones de la
correa en ambas carcasas de los mandriles y
asegúrelas con los broches.

Ajuste del equipo de corte

Nivelación del equipo
Ajuste el equipo mientras el cortacésped esté en
una supercie nivelada. Asegúrese de que los
neumáticos estén inados a la presión correcta.
Consulte Datos técnicos / Transmisión. Si los
neumáticos tienen aire de menos o de más,

Presión de los neumáticos

Todos los neumáticos deben tener una presión
de 15 psi / 103 kPa / 1 bar.
INFORMACIÓN IMPORTANTE NO
agregue ningún tipo de camisa de neumático
ni material de relleno de espuma a los
neumáticos. Las cargas excesivas creadas por
neumáticos rellenos de espuma causan fallas
prematuras.
Utilice solo neumáticos especicados por el
fabricante original.

Ruedecillas

Revíselas cada 200 horas. Compruebe que las
ruedas giren libremente. Si las ruedas no giran
libremente, lleve la unidad al distribuidor para el
servicio.
Los neumáticos rellenos con espuma o
neumáticos macizos anulan la garantía.
Desmontaje y montaje
Quite la tuerca y el perno de la rueda. Tire de la
rueda hacia fuera de la horquilla y tenga cuidado
con los separadores. Para su instalación, siga el
proceso inverso. Apriete el perno de la rueda.

View the manual for the Husqvarna Z 254F here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254F or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
Tom GibbsMarch 8, 2024

How to remove the brake interlock switch

The Husqvarna Z 254F is a lawnmower designed for efficient grass cutting. It features a 54-inch cutting deck made of reinforced steel, providing durability and stability during operation. The mower is equipped with a 26 HP Kohler engine, ensuring powerful performance for both residential and commercial use. The hydrostatic transmission enables smooth speed adjustment without the need to change gears. The lawnmower is designed with air induction mowing technology, which improves airflow within the deck, resulting in a cleaner and more even cut. The high-back seat and ergonomic steering wheel provide a comfortable and easy-to-control riding experience. The Husqvarna Z 254F also comes with a pedal-operated deck lift system for convenient cutting height adjustment. Additionally, the lawnmower features a removable foot pan for easy access to the deck and engine maintenance. The heavy-duty frame and cast iron blade spindles enhance the overall durability of the machine. Overall, the Husqvarna Z 254F is a reliable and efficient lawnmower suitable for various grass cutting needs.

General
BrandHusqvarna
ModelZ 254F
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254F below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How should I properly load the lawnmower onto a trailer or truck using full-width ramps?

To properly load the Husqvarna Z 254F lawnmower onto a trailer or truck using full-width ramps, follow these steps: 1. Drive the machine slowly up the ramps without lifting it by hand. 2. Engage the hydro bypass levers on both sides and pull both steering/park brake controls inwards to manually push the machine if needed. 3. Be cautious as you load the machine onto the trailer or truck using ramps to avoid the risk of injury or accidents. 4. Ensure that the machine is correctly fastened to the transport vehicle to prevent tipping over during transport. 5. Always reverse the machine onto the transport vehicle to enhance stability and safety. 6. Do not exceed the maximum recommended operation angle of 10 degrees when loading or removing the machine. Remember to use full-width ramps and exercise extreme care to prevent any mishaps during the loading process.

What precautions should I take when transporting the lawnmower on roads to ensure safety?

When transporting the Husqvarna Z 254F lawnmower on roads, follow these precautions for safety: 1. Ensure the fuel filler cap is tightly mounted and no flammable substances are kept in an open vessel. 2. Disconnect the grounding cable from the battery first and reconnect it last to prevent sparking. 3. Use full-width ramps for loading the machine into a trailer or truck. 4. Secure the machine with front and rear tie-down straps directed down and out from the machine. 5. Check and comply with local traffic regulations before transporting the machine on roads. 6. Use an approved trailer to transport the machine and turn off the fuel supply. 7. Do not tow the machine or tow trailers with the mower to avoid damage and injuries. 8. Load the unit onto the truck or trailer by driving up ramps of sufficient strength using a slow speed; do not lift the machine by hand. 9. Always reverse the machine onto the transport vehicle to prevent tipping over during transport.

Is the manual of the Husqvarna Z 254F available in English?

Yes, the manual of the Husqvarna Z 254F is available in English .

Is your question not listed? Ask your question here

No results