Husqvarna Z 254F manual

Husqvarna Z 254F
7.5 · 1
PDF manual
 · 72 pages
English
manualHusqvarna Z 254F
53

OPERACIÓN

Mover la máquina manualmente

ADVERTENCIA: No realice ningún
ajuste sin:
el motor detenido,
la llave de contacto retirada,
el freno de estacionamiento activado
Cuando empuje o tira del cortacésped, acople
los varillajes de derivación EZT. Los varillajes de
derivación EZT se encuentran en la parte trasera
del bastidor, debajo de la protección trasera del
motor.
1. Levante el equipo a la posición de corte más
alta.
2. Mueva los controles de la dirección/freno
de estacionamiento simultáneamente hacia
dentro, hasta la posición neutra.
3. Tire de los varillajes de derivación EZT hacia
arriba y retírelos de las ranuras de la chaveta.
Suelte las palancas con la cabeza fuera
del bastidor y manténgala en la posición de
derivación.
4. Para volver a acoplar el EZT a la marcha,
realice el procedimiento anterior a la inversa.
Cargue la máquina en un camión o remolque
conduciendo lentamente por rampas. ¡NO
LEVANTE LA MÁQUINA! La máquina no está
diseñada para ser levantada manualmente.
INFORMACIÓN IMPORTANTE Para
empujar manualmente la cortacésped,
acople las palancas de desvió hidráulicas en
ambos lados, tire el freno de dirección y de
estacionamiento hacia dentro y empuje la
máquina.
ADVERTENCIA: Los varillajes de
derivación están situados cerca del silenciador.
Para prevenir quemaduras, el motor debe
estar apagado y debe dejarse enfriar antes de
manipular las palancas del varillaje derivación.
ADVERTENCIA: Tenga mucho cuidado
cuando cargue la máquina en un camión o
remolque usando rampas. Existe la posibilidad
de daños graves o peligro de muerte si la
máquina se cae de las rampas.
• Utilice aire comprimido para limpiar la supercie
superior del equipo. Evite que se acumule
agua en la supercie superior, en el motor y los
componentes eléctricos.
• Cuando se utiliza el kit para triturar, es
importante que el intervalo de corte sea
frecuente.

View the manual for the Husqvarna Z 254F here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254F or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
Tom GibbsMarch 8, 2024

How to remove the brake interlock switch

The Husqvarna Z 254F is a lawnmower designed for efficient grass cutting. It features a 54-inch cutting deck made of reinforced steel, providing durability and stability during operation. The mower is equipped with a 26 HP Kohler engine, ensuring powerful performance for both residential and commercial use. The hydrostatic transmission enables smooth speed adjustment without the need to change gears. The lawnmower is designed with air induction mowing technology, which improves airflow within the deck, resulting in a cleaner and more even cut. The high-back seat and ergonomic steering wheel provide a comfortable and easy-to-control riding experience. The Husqvarna Z 254F also comes with a pedal-operated deck lift system for convenient cutting height adjustment. Additionally, the lawnmower features a removable foot pan for easy access to the deck and engine maintenance. The heavy-duty frame and cast iron blade spindles enhance the overall durability of the machine. Overall, the Husqvarna Z 254F is a reliable and efficient lawnmower suitable for various grass cutting needs.

General
BrandHusqvarna
ModelZ 254F
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254F below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How should I properly load the lawnmower onto a trailer or truck using full-width ramps?

To properly load the Husqvarna Z 254F lawnmower onto a trailer or truck using full-width ramps, follow these steps: 1. Drive the machine slowly up the ramps without lifting it by hand. 2. Engage the hydro bypass levers on both sides and pull both steering/park brake controls inwards to manually push the machine if needed. 3. Be cautious as you load the machine onto the trailer or truck using ramps to avoid the risk of injury or accidents. 4. Ensure that the machine is correctly fastened to the transport vehicle to prevent tipping over during transport. 5. Always reverse the machine onto the transport vehicle to enhance stability and safety. 6. Do not exceed the maximum recommended operation angle of 10 degrees when loading or removing the machine. Remember to use full-width ramps and exercise extreme care to prevent any mishaps during the loading process.

What precautions should I take when transporting the lawnmower on roads to ensure safety?

When transporting the Husqvarna Z 254F lawnmower on roads, follow these precautions for safety: 1. Ensure the fuel filler cap is tightly mounted and no flammable substances are kept in an open vessel. 2. Disconnect the grounding cable from the battery first and reconnect it last to prevent sparking. 3. Use full-width ramps for loading the machine into a trailer or truck. 4. Secure the machine with front and rear tie-down straps directed down and out from the machine. 5. Check and comply with local traffic regulations before transporting the machine on roads. 6. Use an approved trailer to transport the machine and turn off the fuel supply. 7. Do not tow the machine or tow trailers with the mower to avoid damage and injuries. 8. Load the unit onto the truck or trailer by driving up ramps of sufficient strength using a slow speed; do not lift the machine by hand. 9. Always reverse the machine onto the transport vehicle to prevent tipping over during transport.

Is the manual of the Husqvarna Z 254F available in English?

Yes, the manual of the Husqvarna Z 254F is available in English .

Is your question not listed? Ask your question here

No results