Husqvarna Z 254F manual

Husqvarna Z 254F
7.5 · 1
PDF manual
 · 72 pages
English
manualHusqvarna Z 254F
47

CONTROLES

Control del acelerador

El acelerador regula el régimen del motor y la
velocidad de rotación de las cuchillas, asumiendo
que el interruptor de cuchilla se haya accionado.
Consulte Interruptor de cuchilla.
Para aumentar o disminuir el régimen del motor,
el control se mueve hacia adelante o hacia atrás
respectivamente.
Evite el funcionamiento del motor en ralentí
durante períodos prolongados, ya que existe
el riesgo de contaminar las bujías. USE
ACELERACIÓN MÁXIMA AL CORTAR, para un
mejor rendimiento del cortacésped y carga de la
batería.

Medidor de servicio

El medidor de servicio muestra la cantidad total
de horas que el motor ha estado funcionando e
indica cuando el motor y el cortacésped necesitan
reparación.
Cada 50 horas de funcionamiento, aparecerá
un icono de lata de aceite que permanecerá
encendido durante dos horas, antes de que se
produzca un reinicio automático. Para restablecer
manualmente el medidor, gire la llave a la
posición de apagado cinco veces con intervalos
de un segundo. Para obtener información sobre
el mantenimiento del motor y el cortacésped,
consulte el Registro de servicio de este manual.
NOTA: El indicador de servicio funciona (horas
de reloj) solo cuando el motor está en marcha.
Asegúrese de poner la llave en posición de
apagado cuando la unidad no esté en uso, para
evitar la acumulación de horas del medidor.

Interruptor de cuchilla

Para acoplar el equipo de corte, tire de la perilla
hacia afuera; las cuchillas de corte se desacoplan
cuando la perilla se presiona hacia abajo.

Estrangulador

El estrangulador se utiliza para los arranques en
frío para proporcionar al motor una mejor mezcla
de combustible. Para los arranques en frío el
control se debe tirar hacia arriba.

View the manual for the Husqvarna Z 254F here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254F or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
T
Tom GibbsMarch 8, 2024

How to remove the brake interlock switch

The Husqvarna Z 254F is a lawnmower designed for efficient grass cutting. It features a 54-inch cutting deck made of reinforced steel, providing durability and stability during operation. The mower is equipped with a 26 HP Kohler engine, ensuring powerful performance for both residential and commercial use. The hydrostatic transmission enables smooth speed adjustment without the need to change gears. The lawnmower is designed with air induction mowing technology, which improves airflow within the deck, resulting in a cleaner and more even cut. The high-back seat and ergonomic steering wheel provide a comfortable and easy-to-control riding experience. The Husqvarna Z 254F also comes with a pedal-operated deck lift system for convenient cutting height adjustment. Additionally, the lawnmower features a removable foot pan for easy access to the deck and engine maintenance. The heavy-duty frame and cast iron blade spindles enhance the overall durability of the machine. Overall, the Husqvarna Z 254F is a reliable and efficient lawnmower suitable for various grass cutting needs.

General
BrandHusqvarna
ModelZ 254F
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254F below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

How should I properly load the lawnmower onto a trailer or truck using full-width ramps?

To properly load the Husqvarna Z 254F lawnmower onto a trailer or truck using full-width ramps, follow these steps: 1. Drive the machine slowly up the ramps without lifting it by hand. 2. Engage the hydro bypass levers on both sides and pull both steering/park brake controls inwards to manually push the machine if needed. 3. Be cautious as you load the machine onto the trailer or truck using ramps to avoid the risk of injury or accidents. 4. Ensure that the machine is correctly fastened to the transport vehicle to prevent tipping over during transport. 5. Always reverse the machine onto the transport vehicle to enhance stability and safety. 6. Do not exceed the maximum recommended operation angle of 10 degrees when loading or removing the machine. Remember to use full-width ramps and exercise extreme care to prevent any mishaps during the loading process.

What precautions should I take when transporting the lawnmower on roads to ensure safety?

When transporting the Husqvarna Z 254F lawnmower on roads, follow these precautions for safety: 1. Ensure the fuel filler cap is tightly mounted and no flammable substances are kept in an open vessel. 2. Disconnect the grounding cable from the battery first and reconnect it last to prevent sparking. 3. Use full-width ramps for loading the machine into a trailer or truck. 4. Secure the machine with front and rear tie-down straps directed down and out from the machine. 5. Check and comply with local traffic regulations before transporting the machine on roads. 6. Use an approved trailer to transport the machine and turn off the fuel supply. 7. Do not tow the machine or tow trailers with the mower to avoid damage and injuries. 8. Load the unit onto the truck or trailer by driving up ramps of sufficient strength using a slow speed; do not lift the machine by hand. 9. Always reverse the machine onto the transport vehicle to prevent tipping over during transport.

Is the manual of the Husqvarna Z 254F available in English?

Yes, the manual of the Husqvarna Z 254F is available in English .

Is your question not listed? Ask your question here

No results