Husqvarna Z 254 manual

Husqvarna Z 254
9.3 · 2
PDF manual
 · 76 pages
English
manualHusqvarna Z 254
64

MANTENIMIENTO

desde la parte delantera a la trasera. Si la
punta de la cuchilla delantera no se encuentra
1
/8" a más arriba en la parte trasera, use una
llave de
5
/8 o una llave inglesa para girar
las tuercas en el varillaje de la suspensión
delantera. Girar en el sentido de las agujas
del reloj hará que se levante la parte
delantera del cortacésped; y contra el sentido
de las agujas del reloj, que se baje la parte
delantera. Ajuste las tuercas hasta que la
parte trasera del equipo de corte esté en un
nivel
1
/8" más alto en la parte trasera que en la
medida de lado a lado.
TENGA EN CUENTA: Para nes ilustrativos,
se quitó el reposapiés en la parte delantera. El
ajuste puede hacerse sin extracción.
TENGA EN CUENTA: Esto colocará el equipo de
corte en una posición de medida estándar. En
función del tipo de pasto que éste cortando o las
condiciones ambientales, es posible que deba
realizar ajustes adicionales para lograr el corte
deseado.
INFORMACIÓN IMPORTANTE El perno de
la cuchilla especial está tratado con calor.
Reemplácelo por un perno Husqvarna si es
necesario. No utilice tornillería de grado inferior
al especicado.

Discos de corte

Para conseguir el mejor resultado de corte, es
importante que las cuchillas estén bien aladas y
sin daños.
Reemplace las cuchillas que estén dobladas o
agrietadas después de golpear obstáculos.
Deje que el taller de servicio decida si una
cuchilla con mellas grandes se puede reparar o
si hay que reemplazarla. Equilibre las cuchillas
después del alado.
Revise los montajes de las cuchillas.
AVISO: Las cuchillas son aladas.
Protéjase las manos con guantes
y/o envuelva las cuchillas con un
paño grueso cuando las manipule.
El alado de las cuchillas debe
realizarlo un taller de servicio
autorizado.
Reemplazo de las cuchillas
1. Quite el perno de la cuchilla girándolo en
contra del sentido de las agujas del reloj.
2. Instale cuchillas nuevas o realadas con
el lado que lleva estampadas las palabras
GRASS SIDE (lado del pasto) orientado hacia
el suelo/hierba (hacia abajo) o THIS SIDE
UP (este lado hacia arriba) orientado hacia el
equipo y la carcasa de la cortadora.
3. Asiente la apertura de la cuchilla rmemente
en la carcasa de la cortadora.
4. Apriete el perno de la cuchilla con rmeza.
5. Apriete el perno de la cuchilla a un par de 45-
55 lb-pie (60-81 Nm).

View the manual for the Husqvarna Z 254 here, for free. This manual comes under the category lawnmowers and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 12
C
cinda mitchellAugust 11, 2023

hydraulic fill spot

C
ChandraAugust 16, 2023

Blades won't engage

The Husqvarna Z 254 is a lawnmower designed for a range of cutting applications. It operates with a powerful engine that delivers efficient and reliable performance. The lawnmower is equipped with a 54-inch cutting deck, which allows for swift and wide coverage during mowing tasks. This cutting width ensures that larger areas can be trimmed effectively within a shorter period. The lawnmower's cutting deck is made of sturdy materials, ensuring long-lasting durability and resistance to damage. The machine's construction also includes a robust frame, which contributes to its overall stability and strength. This design feature helps maintain consistent and even cutting results. One notable feature of the Husqvarna Z 254 is its zero-turn maneuverability. This allows the lawnmower to navigate smoothly and efficiently around obstacles in its path. The operator can make precise turns and adjustments, resulting in a more precise and accurate cutting experience. The lawnmower is renowned for its superior cutting performance, thanks to its high-quality blades. These blades are designed to provide optimal cutting efficiency, ensuring a clean and even cut on various terrains and grass types. To enhance the operator's comfort, the Husqvarna Z 254 comes with ergonomic features such as a comfortable seat and a user-friendly control panel. These features aim to reduce operator fatigue and improve overall productivity. Overall, the Husqvarna Z 254 is a reliable and durable lawnmower that provides efficient cutting performance and ease of use, making it suitable for a wide range of mowing applications.

General
BrandHusqvarna
ModelZ 254
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Husqvarna Z 254 lawnmower not starting?

Make sure the ignition switch is in the ON position and that the safety features, such as the seat switch and parking brake, are properly engaged. Check if there is sufficient fuel in the tank and ensure that the spark plug and air filter are clean and in good condition.

How do I adjust the cutting height of my Husqvarna Z 254 lawnmower?

Locate the cutting height adjustment lever on the mower deck. Depress the lever and move it to the desired cutting height position indicated on the deck. Release the lever to lock it in place. Remember to adjust the cutting height with the engine turned off.

What should I do if my Husqvarna Z 254 lawnmower's blades are not cutting efficiently?

Regularly inspect the blades for sharpness and damage. Dull or damaged blades can affect cutting performance. If needed, remove the blades and sharpen or replace them following the manufacturer's recommendations. Also, check if the blade engagement switch is properly engaged.

How often should I change the oil in my Husqvarna Z 254 lawnmower?

It is recommended to change the engine oil in your lawnmower after the initial five hours of use and then change it every 50 hours of operation or annually, whichever comes first. However, if the conditions are exceptionally dusty or the mower is regularly used in hot weather, more frequent oil changes may be necessary.

My Husqvarna Z 254 lawnmower is leaving uncut patches on the lawn. What could be the issue?

Check if the mower deck is set to the correct level. Uneven cutting can occur if the deck is not properly aligned or if the mower is operated on uneven terrain. Additionally, ensure that the grass collection system (if applicable) is properly installed and not clogged, as this can affect the cut quality.

Is the manual of the Husqvarna Z 254 available in English?

Yes, the manual of the Husqvarna Z 254 is available in English .

Is your question not listed? Ask your question here

No results