Husqvarna Z 254 manual

Husqvarna Z 254
9.3 · 2
PDF manual
 · 76 pages
English
manualHusqvarna Z 254
56

OPERACIÓN

INFORMACIÓN IMPORTANTE El
cortacésped está equipado con un sistema
de conexión a tierra negativo de 12 voltios. El
otro vehículo también debe tener un sistema
de conexión a tierra negativo de 12 voltios. No
utilice el cortacésped con sistema para hacer
arrancar otros vehículos.

Batería baja

Si la batería está demasiado baja como para
arrancar el motor, se debe recargar. (Consulte
Batería en la sección Mantenimiento).
Si utiliza los cables de puente para realizar
un arranque de emergencia, siga este
procedimiento:
Uso del cable puente
1. Conecte cada extremo del cable rojo a la
terminal POSITIVA (+) de cada batería,
teniendo cuidado de no hacer cortocircuito
contra el chasis.
AVISO: Las baterías de plomo y
ácido generan gases explosivos. Mantenga
las baterías alejadas de chispas, llamas y
tabaquería. Use siempre protección ocular
cuando esté cerca de las baterías.
ADVERTENCIA: No conduzca en lomas
con pendientes superiores a 10 grados. No
conduzca a través de pendientes.
No conduzca el cortacésped en terrenos con
pendientes de más de 10 grados. Realice el
corte en las pendientes hacia arriba y hacia
abajo, nunca de lado a lado. Evite cambios
repentinos en el sentido de marcha.

Trabajo en pendientes

Lea las instrucciones de seguridad de
Conducción en pendientes en la sección
Seguridad.
Se debe usar la velocidad más lenta posible
antes de comenzar a bajar o subir colinas.
Evite detenerse o cambiar de velocidad en las
colinas.
Si es absolutamente necesario detenerse,
mueva los controles de la dirección a la
posición neutra, empújelos hacia fuera de la
unidad y acople el freno de estacionamiento.
Para volver a iniciar el movimiento, mueva
los controles de la dirección nuevamente a la
posición neutra.
Presione hacia delante para recobrar el
movimiento de avance.
Dé todas las vueltas despacio.
2. Conecte un extremo del cable NEGRO
a la terminal NEGATIVA (-) de la batería
totalmente cargada.
3. Conecte el otro extremo del cable NEGRO
a una CONEXIÓN A TIERRA DEL CHASIS
en buenas condiciones del cortacésped con
la batería descargada, lejos del depósito de
combustible y la batería.
Para quitar los cables, invierta el orden
1. Quite el cable NEGRO primero del chasis y
luego de la batería completamente cargada.
2. Quite el cable ROJO de las dos baterías en
último lugar.
INFORMACIÓN IMPORTANTE Dejar el
interruptor de encendido en cualquier posición
que no sea la de apagado hace que la batería
se descargue.

View the manual for the Husqvarna Z 254 here, for free. This manual comes under the category lawnmowers and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 12
C
cinda mitchellAugust 11, 2023

hydraulic fill spot

C
ChandraAugust 16, 2023

Blades won't engage

The Husqvarna Z 254 is a lawnmower designed for a range of cutting applications. It operates with a powerful engine that delivers efficient and reliable performance. The lawnmower is equipped with a 54-inch cutting deck, which allows for swift and wide coverage during mowing tasks. This cutting width ensures that larger areas can be trimmed effectively within a shorter period. The lawnmower's cutting deck is made of sturdy materials, ensuring long-lasting durability and resistance to damage. The machine's construction also includes a robust frame, which contributes to its overall stability and strength. This design feature helps maintain consistent and even cutting results. One notable feature of the Husqvarna Z 254 is its zero-turn maneuverability. This allows the lawnmower to navigate smoothly and efficiently around obstacles in its path. The operator can make precise turns and adjustments, resulting in a more precise and accurate cutting experience. The lawnmower is renowned for its superior cutting performance, thanks to its high-quality blades. These blades are designed to provide optimal cutting efficiency, ensuring a clean and even cut on various terrains and grass types. To enhance the operator's comfort, the Husqvarna Z 254 comes with ergonomic features such as a comfortable seat and a user-friendly control panel. These features aim to reduce operator fatigue and improve overall productivity. Overall, the Husqvarna Z 254 is a reliable and durable lawnmower that provides efficient cutting performance and ease of use, making it suitable for a wide range of mowing applications.

General
BrandHusqvarna
ModelZ 254
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Husqvarna Z 254 lawnmower not starting?

Make sure the ignition switch is in the ON position and that the safety features, such as the seat switch and parking brake, are properly engaged. Check if there is sufficient fuel in the tank and ensure that the spark plug and air filter are clean and in good condition.

How do I adjust the cutting height of my Husqvarna Z 254 lawnmower?

Locate the cutting height adjustment lever on the mower deck. Depress the lever and move it to the desired cutting height position indicated on the deck. Release the lever to lock it in place. Remember to adjust the cutting height with the engine turned off.

What should I do if my Husqvarna Z 254 lawnmower's blades are not cutting efficiently?

Regularly inspect the blades for sharpness and damage. Dull or damaged blades can affect cutting performance. If needed, remove the blades and sharpen or replace them following the manufacturer's recommendations. Also, check if the blade engagement switch is properly engaged.

How often should I change the oil in my Husqvarna Z 254 lawnmower?

It is recommended to change the engine oil in your lawnmower after the initial five hours of use and then change it every 50 hours of operation or annually, whichever comes first. However, if the conditions are exceptionally dusty or the mower is regularly used in hot weather, more frequent oil changes may be necessary.

My Husqvarna Z 254 lawnmower is leaving uncut patches on the lawn. What could be the issue?

Check if the mower deck is set to the correct level. Uneven cutting can occur if the deck is not properly aligned or if the mower is operated on uneven terrain. Additionally, ensure that the grass collection system (if applicable) is properly installed and not clogged, as this can affect the cut quality.

Is the manual of the Husqvarna Z 254 available in English?

Yes, the manual of the Husqvarna Z 254 is available in English .

Is your question not listed? Ask your question here

No results