Husqvarna Z 254 manual

Husqvarna Z 254
9.3 · 2
PDF manual
 · 76 pages
English
manualHusqvarna Z 254
53

OPERACIÓN

Lea la sección Seguridad y las páginas siguientes
si no está familiarizado con la máquina.

Capacitación

Debido a su exclusiva capacidad de dirección,
los cortacésped de giro cero son mucho más
maniobrables que los cortacésped típicos.
Esta sección se debe analizar en su totalidad
antes de intentar mover el cortacésped con su
propia potencia. Antes de utilizar por primera vez
el cortacésped o hasta que se sienta cómodo
con los controles, utilice una menor velocidad de
aceleración y una velocidad de desplazamiento
reducida. NO mueva las palancas de control a la
posición más adelantada ni a las posiciones de
marcha atrás durante el funcionamiento inicial.
Los usuarios primerizos deben familiarizarse con
el movimiento del cortacésped en una supercie
dura, como el hormigón o el asfalto ANTES
de intentar conducir en césped. Hasta que el
operador se sienta cómodo con los controles
del cortacésped y la capacidad de giro cero, las
maniobras excesivamente bruscas pueden dañar
el césped.

Dirección

Para mover la máquina hacia adelante y hacia
atrás
El sentido de marcha y la velocidad de los
movimientos del cortacésped se ven afectados
por el movimiento de las palancas de control a
cada lado del cortacésped. La palanca de control
izquierda controla la rueda izquierda. La palanca
de control derecha controla la rueda derecha.
Los usuarios primerizos deben empujar el
cortacésped (consulte Mover la máquina
manualmente en la sección Operación) hasta
un lugar abierto y plano, sin otras personas,
vehículos u obstáculos cerca. Para mover la
máquina con su propia potencia, el operador
debe sentarse en el asiento y arrancar el motor
(consulte Antes de arrancar en la sección
Operación). Ajuste el régimen del motor en ralentí
y quite el freno de estacionamiento moviendo las
palancas de control de la dirección hacia adentro.
No conecte las cuchillas. Mientras las palancas
de control no se muevan hacia delante o hacia
atrás, el cortacésped no se moverá.
Mueva lentamente ambas palancas de control
un poco hacia delante. Esto permitirá que el
cortacésped se mueva hacia delante en línea
recta. Tire las palancas de control hacia atrás
a la posición neutra y el cortacésped dejará de
moverse.
Tire ligeramente hacia atrás las palancas de
control para que el cortacésped se mueva hacia
atrás. Empuje las palancas de control hacia
delante, hasta la posición neutra y el cortacésped
dejará de moverse.
Para girar a la derecha
Mientras se mueve en la dirección de avance,
tire de la palanca derecha hacia atrás hacia la
posición neutral y mantenga a la vez la posición
de la palanca izquierda, esto reducirá la velocidad
de rotación de la rueda derecha y hará que la
máquina gire en esa dirección.
Para girar a la izquierda
Mientras se mueve en la dirección de avance,
tire de la palanca izquierda hacia atrás hacia la
posición neutral y mantenga a la vez la posición
de la palanca derecha, esto reducirá la velocidad
de rotación de la rueda izquierda y hará que la
máquina gire en esa dirección.
Para realizar el giro cero
Mientras se mueve en el sentido de avance,
primero tire de ambas palancas de control hacia
atrás hasta que el cortacésped se detenga o
reduzca drásticamente su velocidad.
A continuación, alternando una palanca
ligeramente hacia la posición de avance y la otra
en la posición de retroceso, realice el giro.

Antes de arrancar

1. Lea las secciones sobre Seguridad y
Controles antes de arrancar la máquina.
2. Realice el mantenimiento diario antes
de arrancar (consulte el Programa de
mantenimiento en la sección Mantenimiento).
3. Compruebe que haya suciente combustible
en el depósito de combustible.
4. Ajuste el asiento en la posición deseada.
Las condiciones siguientes deben cumplirse
antes de que se pueda arrancar el motor:
El interruptor de cuchilla se debe presionar
hacia abajo a la posición desacoplada.
Ambos controles de dirección/freno de
estacionamiento deben estar en la posición
neutra bloqueada (exterior).
ADVERTENCIA!
Los gases de escape
del motor contienen monóxido de carbono, que
es un gas venenoso inodoro e incoloro. No
utilice la máquina en espacios cerrados.

View the manual for the Husqvarna Z 254 here, for free. This manual comes under the category lawnmowers and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 12
R
Ray July 30, 2023

My Z254 still will not start after I sent it to an authorized service company? I cannot keep dumping money and time into a mower with less than 300 hours on the machine?

P
Paul MillerSeptember 29, 2023

The right lever handle is loose and doesn’t respond as quickly as the left lever when turning

1 comment
D
David StantonJune 9, 2024

@Paul Miller I have the same problem. The left one has a resistance, but not the right. Any luck figuring this out yet?

W
Watson SmithJune 4, 2024

Need a picture of the drive belt set up

A
AlexJuly 17, 2023

What kind of engine oil should be added to this mower?

1 comment
F
Freda chapelJuly 18, 2023

What kind of oil to use in husqvana z254 with Kolher engine

A
AvilaJuly 11, 2023

What size is the drive belt for husqvarna z255

G
Gerald StonehamJuly 24, 2023

What type of oil Z254 and capacity?

E
erik landisApril 15, 2024

what is the spark plug gap on a z254

E
erik landisApril 15, 2024

what is the spark plug gap on my z254

A
Allen SmithMay 22, 2024

Where is seat safety switch

D
Douglas PuryearApril 26, 2023

where is voltage regulator on mower

The Husqvarna Z 254 is a lawnmower designed for a range of cutting applications. It operates with a powerful engine that delivers efficient and reliable performance. The lawnmower is equipped with a 54-inch cutting deck, which allows for swift and wide coverage during mowing tasks. This cutting width ensures that larger areas can be trimmed effectively within a shorter period. The lawnmower's cutting deck is made of sturdy materials, ensuring long-lasting durability and resistance to damage. The machine's construction also includes a robust frame, which contributes to its overall stability and strength. This design feature helps maintain consistent and even cutting results. One notable feature of the Husqvarna Z 254 is its zero-turn maneuverability. This allows the lawnmower to navigate smoothly and efficiently around obstacles in its path. The operator can make precise turns and adjustments, resulting in a more precise and accurate cutting experience. The lawnmower is renowned for its superior cutting performance, thanks to its high-quality blades. These blades are designed to provide optimal cutting efficiency, ensuring a clean and even cut on various terrains and grass types. To enhance the operator's comfort, the Husqvarna Z 254 comes with ergonomic features such as a comfortable seat and a user-friendly control panel. These features aim to reduce operator fatigue and improve overall productivity. Overall, the Husqvarna Z 254 is a reliable and durable lawnmower that provides efficient cutting performance and ease of use, making it suitable for a wide range of mowing applications.

General
BrandHusqvarna
ModelZ 254
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Husqvarna Z 254 lawnmower not starting?

Make sure the ignition switch is in the ON position and that the safety features, such as the seat switch and parking brake, are properly engaged. Check if there is sufficient fuel in the tank and ensure that the spark plug and air filter are clean and in good condition.

How do I adjust the cutting height of my Husqvarna Z 254 lawnmower?

Locate the cutting height adjustment lever on the mower deck. Depress the lever and move it to the desired cutting height position indicated on the deck. Release the lever to lock it in place. Remember to adjust the cutting height with the engine turned off.

What should I do if my Husqvarna Z 254 lawnmower's blades are not cutting efficiently?

Regularly inspect the blades for sharpness and damage. Dull or damaged blades can affect cutting performance. If needed, remove the blades and sharpen or replace them following the manufacturer's recommendations. Also, check if the blade engagement switch is properly engaged.

How often should I change the oil in my Husqvarna Z 254 lawnmower?

It is recommended to change the engine oil in your lawnmower after the initial five hours of use and then change it every 50 hours of operation or annually, whichever comes first. However, if the conditions are exceptionally dusty or the mower is regularly used in hot weather, more frequent oil changes may be necessary.

My Husqvarna Z 254 lawnmower is leaving uncut patches on the lawn. What could be the issue?

Check if the mower deck is set to the correct level. Uneven cutting can occur if the deck is not properly aligned or if the mower is operated on uneven terrain. Additionally, ensure that the grass collection system (if applicable) is properly installed and not clogged, as this can affect the cut quality.

Is the manual of the Husqvarna Z 254 available in English?

Yes, the manual of the Husqvarna Z 254 is available in English .

Is your question not listed? Ask your question here

No results