Husqvarna Z 254 manual

Husqvarna Z 254
9.3 · 2
PDF manual
 · 76 pages
English
manualHusqvarna Z 254
46

SEGURIDAD

Cuide el estado de las etiquetas de seguridad
e instructivas, o sustitúyalas, según sea
necesario.
• No interera con la función propia de los
dispositivos de seguridad ni reduzca la
protección provista por un dispositivo de
seguridad. Revise con regularidad que operen
bien. NO haga funcionar una máquina con
un dispositivo de seguridad que no funcione
correctamente.
Pueden producirse chispas cuando se trabaja
con la batería y los cables pesados del circuito
del motor de arranque. Esto puede causar una
explosión de la batería, incendio o daños en
los ojos. No se producirán chispas una vez que
el cable de conexión a tierra (por lo general
negativo, negro) se extraiga de la batería.
Desconecte el cable de conexión a tierra de la
batería primero y vuelva a conectarlo en último
lugar.
No haga un cortocircuito de puente en el relé
del motor de arranque para activar el motor de
arranque.
Tenga mucho cuidado al manipular el ácido
de la batería. El ácido puede causar graves
quemaduras corrosivas en la piel. Si se
derrama ácido de la batería sobre la piel,
enjuague inmediatamente con agua. El ácido
en los ojos puede causar ceguera, póngase en
contacto con un médico de inmediato.
Tenga cuidado
cuando efectúe
trabajos en la
batería. En ella
se forman gases
explosivos. No
lleve a cabo el
mantenimiento de
la batería mientras
esté fumando o si se encuentra cerca de llamas
abiertas o chispas. La batería puede explotar y
causar daños graves o lesiones.
La máquina ha sido probada y aprobada solo
con el equipo proporcionado originalmente o
recomendado por el fabricante. Utilice solo
piezas de repuesto aprobadas para la máquina.
• Las cuchillas están aladas y pueden causar
cortes y heridas profundas. Envuelva las
cuchillas o use guantes protectores durante su
manipulación.
Compruebe el funcionamiento del freno de
estacionamiento con regularidad. Hágale los
ajustes y el servicio necesarios.
Las cuchillas para mantillo solo deben usarse
en áreas conocidas donde se desee un corte
de mayor calidad.
Limpie regularmente la plataforma y la parte
inferior de la plataforma, evite salpicar con agua
el motor y los componentes eléctricos.
ADVERTENCIA: El motor no debe
arrancarse si se he retirado la placa del piso
del conductor o cualquier placa protectora de
la correa de transmisión del equipo de corte.
AVISO: Utilice gafas de protección
para trabajos de mantenimiento.
Revise frecuentemente los componentes
del recogedor de césped y la protección de
descarga y realice los reemplazos necesarios
con piezas recomendadas por el fabricante.
No cambie los ajustes de los reguladores y
evite usar la máquina con un régimen del motor
demasiado alto. Si hace funcionar el motor
demasiado rápido, los componentes de la
máquina podrían dañarse.
Para reducir el riesgo de incendio, mantenga la
máquina limpia y sin acumulación de césped,
hojas u otra basura. Limpie las salpicaduras de
aceite o combustible y quite los restos mojados
con combustible. Permita que la máquina se
enfríe antes de almacenarla.
Deténgase para inspeccionar el equipo si
pasa por encima de algo o topa algo. Si es
necesario, haga reparaciones antes de arrancar
la máquina.
No haga ajustes o reparaciones con el motor en
funcionamiento.
No trabaje con el circuito del motor de arranque
si hay combustible derramado.
Asegúrese de que el equipo esté en buen
estado y que todas las tuercas y los pernos,
sobre todo los que aseguran los accesorios de
la cuchilla, estén correctamente apretados con
el par de apriete adecuado.
Asegúrese de que el
tapón del depósito
de combustible
esté cerrado
rmemente y no
haya sustancias
inamables
almacenadas en un
recipiente abierto.

View the manual for the Husqvarna Z 254 here, for free. This manual comes under the category lawnmowers and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 12
R
Ray July 30, 2023

My Z254 still will not start after I sent it to an authorized service company? I cannot keep dumping money and time into a mower with less than 300 hours on the machine?

P
Paul MillerSeptember 29, 2023

The right lever handle is loose and doesn’t respond as quickly as the left lever when turning

1 comment
D
David StantonJune 9, 2024

@Paul Miller I have the same problem. The left one has a resistance, but not the right. Any luck figuring this out yet?

W
Watson SmithJune 4, 2024

Need a picture of the drive belt set up

A
AlexJuly 17, 2023

What kind of engine oil should be added to this mower?

1 comment
F
Freda chapelJuly 18, 2023

What kind of oil to use in husqvana z254 with Kolher engine

A
AvilaJuly 11, 2023

What size is the drive belt for husqvarna z255

G
Gerald StonehamJuly 24, 2023

What type of oil Z254 and capacity?

E
erik landisApril 15, 2024

what is the spark plug gap on a z254

E
erik landisApril 15, 2024

what is the spark plug gap on my z254

A
Allen SmithMay 22, 2024

Where is seat safety switch

D
Douglas PuryearApril 26, 2023

where is voltage regulator on mower

The Husqvarna Z 254 is a lawnmower designed for a range of cutting applications. It operates with a powerful engine that delivers efficient and reliable performance. The lawnmower is equipped with a 54-inch cutting deck, which allows for swift and wide coverage during mowing tasks. This cutting width ensures that larger areas can be trimmed effectively within a shorter period. The lawnmower's cutting deck is made of sturdy materials, ensuring long-lasting durability and resistance to damage. The machine's construction also includes a robust frame, which contributes to its overall stability and strength. This design feature helps maintain consistent and even cutting results. One notable feature of the Husqvarna Z 254 is its zero-turn maneuverability. This allows the lawnmower to navigate smoothly and efficiently around obstacles in its path. The operator can make precise turns and adjustments, resulting in a more precise and accurate cutting experience. The lawnmower is renowned for its superior cutting performance, thanks to its high-quality blades. These blades are designed to provide optimal cutting efficiency, ensuring a clean and even cut on various terrains and grass types. To enhance the operator's comfort, the Husqvarna Z 254 comes with ergonomic features such as a comfortable seat and a user-friendly control panel. These features aim to reduce operator fatigue and improve overall productivity. Overall, the Husqvarna Z 254 is a reliable and durable lawnmower that provides efficient cutting performance and ease of use, making it suitable for a wide range of mowing applications.

General
BrandHusqvarna
ModelZ 254
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Husqvarna Z 254 lawnmower not starting?

Make sure the ignition switch is in the ON position and that the safety features, such as the seat switch and parking brake, are properly engaged. Check if there is sufficient fuel in the tank and ensure that the spark plug and air filter are clean and in good condition.

How do I adjust the cutting height of my Husqvarna Z 254 lawnmower?

Locate the cutting height adjustment lever on the mower deck. Depress the lever and move it to the desired cutting height position indicated on the deck. Release the lever to lock it in place. Remember to adjust the cutting height with the engine turned off.

What should I do if my Husqvarna Z 254 lawnmower's blades are not cutting efficiently?

Regularly inspect the blades for sharpness and damage. Dull or damaged blades can affect cutting performance. If needed, remove the blades and sharpen or replace them following the manufacturer's recommendations. Also, check if the blade engagement switch is properly engaged.

How often should I change the oil in my Husqvarna Z 254 lawnmower?

It is recommended to change the engine oil in your lawnmower after the initial five hours of use and then change it every 50 hours of operation or annually, whichever comes first. However, if the conditions are exceptionally dusty or the mower is regularly used in hot weather, more frequent oil changes may be necessary.

My Husqvarna Z 254 lawnmower is leaving uncut patches on the lawn. What could be the issue?

Check if the mower deck is set to the correct level. Uneven cutting can occur if the deck is not properly aligned or if the mower is operated on uneven terrain. Additionally, ensure that the grass collection system (if applicable) is properly installed and not clogged, as this can affect the cut quality.

Is the manual of the Husqvarna Z 254 available in English?

Yes, the manual of the Husqvarna Z 254 is available in English .

Is your question not listed? Ask your question here

No results