Husqvarna Z 254 manual

Husqvarna Z 254
9.3 · 2
PDF manual
 · 76 pages
English
manualHusqvarna Z 254
44

SEGURIDAD

No maneje la máquina si no tiene el recogedor
de césped completo, la protección de descarga
u otros dispositivos de seguridad en su lugar y
en funcionamiento.
Desacelere antes de dar la vuelta.
No deje la máquina en funcionamiento sin
vigilar. Siempre detenga las cuchillas, active el
freno de estacionamiento, detenga el motor y
retire la llave antes de descender.
No transporte pasajeros La máquina se ha
diseñado solamente para que la use una sola
persona.
Desenganche las hojas cuando no esté
cortando césped. Apague el motor y espere
hasta que todas las partes se detengan por
completo antes de limpiar la máquina, retirar el
recogedor de césped o destapar la protección
de descarga.
Opere la máquina únicamente durante el día o
con buena luz articial.
No opere la máquina mientras esté bajo la
inuencia de alcohol o drogas.
• Esté pendiente del tráco cuando opere la
máquina cerca de caminos o al cruzarlos.
Tenga cuidado extremo cuando cargue o
descargue la máquina de un trailer o camión.
Use siempre protección ocular cuando opere la
máquina.
ADVERTENCIA: Cuando utilice la
máquina, debe utilizar un equipo de protección
personal homologado. El equipo de protección
personal no puede eliminar el riesgo de
lesiones pero reducirá el grado de lesiones en
caso de que se produzca un accidente. Pida
ayuda a su distribuidor para elegir los equipos
de protección adecuados.
Use equipo de protección personal (PPE,
Personal Protective Equipment) mientras
usa esta máquina, incluido (como mínimo)
un calzado resistente, protección ocular y
protectores auriculares. No corte en pantalones
cortos ni con calzado que deje los dedos
descubiertos.
Los datos indican que los operadores de 60
años o más son víctimas de un gran porcentaje
de lesiones relacionadas con la conducción
de un cortacésped. Estos operadores deben
evaluar su habilidad para operar la cortadora de
césped en forma sucientemente segura como
para protegerse a sí mismos y a los demás de
una lesión grave.
Siga las recomendaciones del fabricante para
los pesos de las ruedas o los contrapesos.
Mantenga la máquina libre de cualquier
acumulación de césped, hojas u otra basura,
pues podrían entrar en contacto con el escape
caliente y/o las partes del motor y quemarse.
No permita que la plataforma de la cortadora
de césped levante hojas u otra basura que
pueda causar acumulaciones. Limpie cualquier
derrame de aceite o combustible antes de
operar o almacenar la máquina.
Permita que la máquina se enfríe antes de
almacenarla.

Equipo de seguridad personal

Asegúrese de tener
a mano el equipo
de primeros auxilios
durante la utilización
de la máquina.
No utilice la máquina
si está descalzo.
Es imperativo usar
zapatos o botas de protección, preferiblemente
con puntera de acero.
Siempre use gafas protectoras homologadas
o un visor completo al realizar el montaje o
durante la conducción.
Siempre use guantes al manipular las cuchillas.
No lleve ropa ancha que pueda quedar
atrapada en las piezas móviles.
• Utilice protectores auriculares para evitar daños
en los oídos.

Funcionamiento en pendientes

Las pendientes son un factor importante
relacionado con la pérdida de control y
accidentes donde se vuelca, que pueden causar
daños graves o la muerte. El uso en todas las
pendientes requiere tener especial precaución. Si
usted no puede retroceder de una pendiente o si
se siente incómodo en la pendiente, no la pode.
Corte las pendientes
hacia arriba y hacia
abajo, no de un lado
a otro.
Tenga cuidado con
los hoyos, surcos,
protuberancias,
piedras y otros
objetos ocultos. El terreno disparejo podría
volcar la máquina. El césped alto puede ocultar
obstáculos.
Elija una velocidad absoluta baja, así no tiene
que detenerse mientras está en la pendiente.

View the manual for the Husqvarna Z 254 here, for free. This manual comes under the category lawnmowers and has been rated by 2 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Husqvarna Z 254 or do you need help? Ask your question here

Need help?

Do you have a question about the Husqvarna and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 12
R
Ray July 30, 2023

My Z254 still will not start after I sent it to an authorized service company? I cannot keep dumping money and time into a mower with less than 300 hours on the machine?

P
Paul MillerSeptember 29, 2023

The right lever handle is loose and doesn’t respond as quickly as the left lever when turning

1 comment
D
David StantonJune 9, 2024

@Paul Miller I have the same problem. The left one has a resistance, but not the right. Any luck figuring this out yet?

W
Watson SmithJune 4, 2024

Need a picture of the drive belt set up

A
AlexJuly 17, 2023

What kind of engine oil should be added to this mower?

1 comment
F
Freda chapelJuly 18, 2023

What kind of oil to use in husqvana z254 with Kolher engine

A
AvilaJuly 11, 2023

What size is the drive belt for husqvarna z255

G
Gerald StonehamJuly 24, 2023

What type of oil Z254 and capacity?

E
erik landisApril 15, 2024

what is the spark plug gap on a z254

E
erik landisApril 15, 2024

what is the spark plug gap on my z254

A
Allen SmithMay 22, 2024

Where is seat safety switch

D
Douglas PuryearApril 26, 2023

where is voltage regulator on mower

The Husqvarna Z 254 is a lawnmower designed for a range of cutting applications. It operates with a powerful engine that delivers efficient and reliable performance. The lawnmower is equipped with a 54-inch cutting deck, which allows for swift and wide coverage during mowing tasks. This cutting width ensures that larger areas can be trimmed effectively within a shorter period. The lawnmower's cutting deck is made of sturdy materials, ensuring long-lasting durability and resistance to damage. The machine's construction also includes a robust frame, which contributes to its overall stability and strength. This design feature helps maintain consistent and even cutting results. One notable feature of the Husqvarna Z 254 is its zero-turn maneuverability. This allows the lawnmower to navigate smoothly and efficiently around obstacles in its path. The operator can make precise turns and adjustments, resulting in a more precise and accurate cutting experience. The lawnmower is renowned for its superior cutting performance, thanks to its high-quality blades. These blades are designed to provide optimal cutting efficiency, ensuring a clean and even cut on various terrains and grass types. To enhance the operator's comfort, the Husqvarna Z 254 comes with ergonomic features such as a comfortable seat and a user-friendly control panel. These features aim to reduce operator fatigue and improve overall productivity. Overall, the Husqvarna Z 254 is a reliable and durable lawnmower that provides efficient cutting performance and ease of use, making it suitable for a wide range of mowing applications.

General
BrandHusqvarna
ModelZ 254
Productlawnmower
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna Z 254 below.

How short should I cut the grass?

When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.

How often should I cut the grass?

In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.

Can I mow the lawn when the grass is wet?

You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.

Why is my Husqvarna Z 254 lawnmower not starting?

Make sure the ignition switch is in the ON position and that the safety features, such as the seat switch and parking brake, are properly engaged. Check if there is sufficient fuel in the tank and ensure that the spark plug and air filter are clean and in good condition.

How do I adjust the cutting height of my Husqvarna Z 254 lawnmower?

Locate the cutting height adjustment lever on the mower deck. Depress the lever and move it to the desired cutting height position indicated on the deck. Release the lever to lock it in place. Remember to adjust the cutting height with the engine turned off.

What should I do if my Husqvarna Z 254 lawnmower's blades are not cutting efficiently?

Regularly inspect the blades for sharpness and damage. Dull or damaged blades can affect cutting performance. If needed, remove the blades and sharpen or replace them following the manufacturer's recommendations. Also, check if the blade engagement switch is properly engaged.

How often should I change the oil in my Husqvarna Z 254 lawnmower?

It is recommended to change the engine oil in your lawnmower after the initial five hours of use and then change it every 50 hours of operation or annually, whichever comes first. However, if the conditions are exceptionally dusty or the mower is regularly used in hot weather, more frequent oil changes may be necessary.

My Husqvarna Z 254 lawnmower is leaving uncut patches on the lawn. What could be the issue?

Check if the mower deck is set to the correct level. Uneven cutting can occur if the deck is not properly aligned or if the mower is operated on uneven terrain. Additionally, ensure that the grass collection system (if applicable) is properly installed and not clogged, as this can affect the cut quality.

Is the manual of the Husqvarna Z 254 available in English?

Yes, the manual of the Husqvarna Z 254 is available in English .

Is your question not listed? Ask your question here

No results