View the manual for the Husqvarna R 213C here, for free. This manual comes under the category lawnmowers and has been rated by 8 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Husqvarna R 213C or do you need help? Ask your question here
The Husqvarna R 213C lawnmower is a gas-powered machine designed for residential use. It features a 21-inch cutting deck that provides a broad cutting swath, making it well-suited for medium-sized lawns. The mower is equipped with a powerful engine that can deliver speeds of up to 3.7 miles per hour. The engine is also air-cooled, ensuring that it operates efficiently in high-temperature conditions. The R 213C features a range of cutting height adjustments, allowing users to easily modify their grass cutting to suit their preferences. Additionally, this lawnmower is easy to maneuver, thanks to its ergonomic design. The mower has a comfortable grip and a lightweight construction, enabling users to push and maneuver it effortlessly. The Husqvarna R 213C has a durable construction and is built to withstand prolonged use. Its cutting deck is made of high-quality steel, which is resistant to rust and other types of damage. Additionally, the mower features large, sturdy wheels that provide excellent traction even on steep or uneven terrain. Overall, the Husqvarna R 213C lawnmower is a reliable and efficient machine that is perfect for homeowners who want to maintain a beautiful, well-kept lawn. Its high-quality construction, powerful engine, and easy maneuverability make it an excellent choice for anyone in need of a dependable lawn mower.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna R 213C below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
Ensure that the spark plug is connected securely and the fuel tank has sufficient gasoline. Check if the engine switch is turned on and the choke is properly set. If these are not the issues, a manual can guide you on troubleshooting other potential causes such as a clogged fuel filter or a faulty ignition coil.
Locate the cutting height adjustment lever, usually located near the wheels. Consult the manual to understand how to properly adjust the cutting height using this lever. It will provide instructions on the specific positions for different cutting heights and how to set it accordingly.
Husqvarna R 213C can handle minor unevenness in your lawn. However, significant slopes or very rough terrain may pose challenges. The manual contains guidance on the maximum recommended grades and types of terrain the lawnmower can handle safely. Always refer to the manual for detailed information and safety precautions.
Start by removing the spark plug wire to prevent accidental starting. You can then consult the manual to locate the recommended cleaning points, such as the underside of the deck and the air filter. It will provide instructions on how to properly clean and maintain these areas, ensuring the longevity and optimal performance of the lawnmower.
Blade maintenance depends on several factors, including the frequency and intensity of use, as well as the condition of your lawn. Blades generally require sharpening after approximately 25-30 hours of mowing or if you notice a decrease in cutting performance. The manual will offer specific recommendations for blade maintenance intervals and instructions on how to safely sharpen or replace the blades.
Yes, the manual of the Husqvarna R 213C is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Husqvarna and is the answer not in the manual?
Question and answer
Number of questions: 2How do you bring the cutting deck into a vertical position?
This message has been automatically translatedHow do I lift the cutting unit so that I can see the blades?
This message has been automatically translated