View the manual for the Husqvarna LC 419SP here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna LC 419SP or do you need help? Ask your question here
The Husqvarna LC 419SP lawnmower is a gas-powered push mower designed for residential use on small to medium-sized lawns. It is equipped with a 19-inch cutting deck that is made of steel, providing durability and long-lasting use. The cutting height can be adjusted using a single-lever system, allowing you to adapt to different grass heights and conditions easily. The engine on the Husqvarna LC 419SP is a 163cc Briggs and Stratton engine, providing reliable power for the mower. The engine is equipped with an auto choke function to allow for easy starting, even in cold conditions. The mower has a variable speed drive system that allows you to adjust the speed to your preferences. A grass bag collection system is included with the mower, which has a 12.9-gallon capacity, reducing the amount of time spent emptying the bag. Additionally, the mower has a 3-in-1 cutting system that allows you to choose between bagging, mulching, or side discharging clippings. The mower is also equipped with high-sensitivity sensors that prevent engine damage due to low oil levels. The handle on the Husqvarna LC 419SP is adjustable to allow for comfortable operation. The handle can be folded for easy storage or transportation of the mower. The wheels on the mower are equipped with double ball bearings, providing smoother operation and reducing vibrations. Overall, the Husqvarna LC 419SP lawnmower is a reliable choice for those looking for a gas-powered push mower that is easy to use and provides a range of cutting options.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna LC 419SP below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
To troubleshoot if the drive on the wheels of the Husqvarna LC 419SP lawnmower is not engaging or disengaging, follow these steps: 1. Check the clutch wire adjustment: If the drive feels slow or is not engaging properly, it may be necessary to adjust the clutch wire. Locate the adjuster screw and turn it counterclockwise to increase the drive speed or clockwise to decrease the drive speed. 2. Inspect the fuel system: Ensure that the fuel tank cap and seal are not damaged. Check the fuel hose for any leaks. If the fuel hose is damaged, it should be replaced by a service agent. 3. Verify the ignition cable connection: Make sure that the ignition cable is properly connected to the spark plug. If it is not connected correctly, reattach it securely. 4. Clean or replace the spark plug: If the engine does not start or operates roughly, the spark plug may be defective. Adjust the electrode gap, clean, or replace the spark plug as needed. 5. Consult a service agent: If the troubleshooting steps above do not resolve the issue, it is recommended to seek assistance from an approved service agent for further diagnosis and repair. By following these steps, you can troubleshoot issues with the drive engagement and disengagement of the Husqvarna LC 419SP lawnmower.
To troubleshoot if the lawnmower does not stop when you move the throttle control to the stop position on the Husqvarna LC 419SP lawnmower, follow these steps: 1. Check the throttle control position: Ensure that the throttle control is fully moved to the stop position. Sometimes, the control may not be fully engaged, causing the engine to continue running. 2. Verify the ignition cable connection: Make sure that the ignition cable is securely connected to the spark plug. If it is loose or disconnected, the engine may not stop when the throttle control is moved to the stop position. Reattach the ignition cable if necessary. 3. Inspect the spark plug: A dirty or defective spark plug can prevent the engine from stopping. Remove the spark plug and clean it using a wire brush. If the spark plug is damaged or worn out, replace it with a new one. 4. Consult a service agent: If the troubleshooting steps above do not resolve the issue, it is recommended to seek assistance from an approved service agent for further diagnosis and repair. By following these steps, you can troubleshoot the issue of the lawnmower not stopping when the throttle control is moved to the stop position on the Husqvarna LC 419SP lawnmower.
To troubleshoot if you're not getting a good result when using the Husqvarna LC 419SP lawnmower, follow these steps: 1. Check the spark plug: Ensure that the spark plug is clean and in good condition. Adjust the electrode gap or replace the spark plug if necessary. 2. Examine the fuel system: Inspect the fuel tank cap and seal for any damages. Check the fuel hose for leaks and have it replaced by a service agent if needed. Drain the fuel tank and carburetor if the fuel is old or contaminated. 3. Clean or replace the air filter: A dirty air filter can affect the performance of the lawnmower. Clean the air filter and the air filter housing to ensure proper airflow. 4. Adjust the carburetor: If the engine does not operate smoothly, it may be necessary to adjust the carburetor. Seek assistance from a servicing dealer to perform this adjustment. 5. Check the cutting height and blade condition: Ensure that the cutting height is set correctly and that the blades are sharp and properly balanced. Adjust or replace the blades as needed. By following these steps, you can troubleshoot issues and improve the performance of the Husqvarna LC 419SP lawnmower.
To troubleshoot if the lawnmower requires maintenance and you're not sure how to perform it on the Husqvarna LC 419SP lawnmower, follow these steps: 1. Clean the product: Use a brush to remove leaves, grass, and dirt from the lawnmower. Ensure that the air intake on the top of the engine is not blocked. Avoid using a high-pressure washer and do not flush water directly on the engine. 2. Check the oil level: Examine the oil level and replace the oil after every 50 hours of use or annually. Use the recommended oil type and follow the instructions in the manual. 3. Inspect the cutting equipment: Regularly examine the cutting equipment for damage or cracks. Replace any damaged cutting equipment to ensure safe and efficient operation. 4. Clean or replace the air filter: Clean the air filter regularly, especially under dusty conditions or when airborne debris is present. If the air filter is very dirty, replace it with a new one. 5. Consult a service agent: If you are unsure about any maintenance tasks or need further assistance, it is recommended to consult an approved Husqvarna service agent. They can provide guidance and perform maintenance tasks professionally. By following these steps, you can troubleshoot and perform necessary maintenance on the Husqvarna LC 419SP lawnmower to ensure its optimal performance.
To troubleshoot if you need to find specific technical data about the Husqvarna LC 419SP lawnmower, follow these steps: 1. Refer to the operator's manual: The operator's manual contains detailed technical data about the lawnmower. Look for the section that provides technical specifications or data. 2. Locate the technical data page: In the manual, navigate to the page that specifically presents the technical data for the Husqvarna LC 419SP lawnmower. This page will include information such as the engine brand, engine model name, engine type, displacement, speed, nominal engine output, sound power level, vibrations, ignition system, fuel and lubrication system, weight, and more. 3. Review the technical data: Once you have found the technical data page, carefully read and review the information provided. Pay attention to the specific details that you are looking for, such as engine specifications, fuel capacity, oil type, and any other relevant technical information. By following these steps and referring to the operator's manual, you can easily find the specific technical data about the Husqvarna LC 419SP lawnmower.
Yes, the manual of the Husqvarna LC 419SP is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Husqvarna and is the answer not in the manual?
Question and answer
Number of questions: 0