View the manual for the Husqvarna LC 151 here, for free. This manual comes under the category lawnmowers and has been rated by 12 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Husqvarna LC 151 or do you need help? Ask your question here

The Husqvarna LC 151 is a walk-behind lawnmower designed for use in the United States. With a maximum lawn area of 1000 square meters, this lawnmower is suitable for small to medium-sized yards. Its cutting system utilizes rotary blades to effectively trim grass, with a cutting width of 510 millimeters. The LC 151 features adjustable cutting clearance, allowing users to choose from seven different height positions. The minimum cutting height is 25 millimeters, while the maximum cutting height reaches 75 millimeters. This range offers flexibility to accommodate various grass lengths and preferences. For easy grass disposal, the LC 151 comes with a grass catcher with a capacity of 65 liters. Its rear-wheel drive ensures effortless maneuverability, providing control and stability while mowing. The lawnmower also boasts an ergonomic handle that can be adjusted to meet the user's comfort needs during operation. Additionally, the LC 151 offers a mulching function, allowing users to finely chop the grass clippings and leave them on the lawn as a natural fertilizer. With four wheels, this lawnmower provides stability and balance during use. Constructed with durable materials, the Husqvarna LC 151 ensures reliability and longevity. Its custom-fit design ensures optimal performance for each specific vehicle model. This lawnmower offers a practical and efficient solution for maintaining a well-manicured lawn.
| Brand | Husqvarna |
| Model | LC 151 | 970 48 83-01 |
| Product | lawnmower |
| EAN | 7392930544505 |
| Language | English |
| Filetype | User manual (PDF) |
| Type | Walk behind lawn mower |
| Maximum lawn area | 1000 m² |
| Cutting system | Rotary blades |
| Cutting width | 510 mm |
| Cutting clearance adjustment | Yes |
| Number of height positions | 7 |
| Minimum cutting height | 25 mm |
| Maximum cutting height | 75 mm |
| Grass catcher | Yes |
| Grass collecting volume | 65 L |
| Drive type | Rear wheel drive |
| Ergonomic handle | Yes |
| Adjustable handle | Yes |
| Mulching function | Yes |
| Number of wheels | 4 wheel(s) |
| Cooling type | Air |
| Engine displacement | 166 cm³ |
| Handle(s) features | Adjustable, Ergonomic, Foldable, Soft grip |
| Rotational speed | 2800 RPM |
| Front wheels diameter | 203 mm |
| Rear wheels diameter | 203 mm |
| Sound pressure level | 86 dB |
| Sound power level | 96 dB |
| Vibration emission | 8.5 m/s² |
| Product color | Grey, Orange |
| Housing material | Composite |
| Power source | Gasoline |
| Engine power | 2700 W |
| Motor power | 3.6 hp |
| Weight | 30300 g |
| Country of origin | Sweden |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna LC 151 below.
The Husqvarna LC 151 has a weight of 30300 g.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
Check if the fuel tank is filled with unleaded gasoline. Ensure that the ignition switch is turned on and the safety lever is released. Also, verify that the spark plug is clean and properly connected.
To adjust the cutting height, first, raise the lawnmower onto its rear wheels by pressing the height adjustment lever towards the wheel. Then, select the desired cutting height by moving the height adjustment lever to the corresponding position for the desired cutting height.
Ensure that the cutting blade is sharp and not dull. Check for any debris or obstacles blocking the discharge chute or the cutting deck. Additionally, increase the cutting height if the grass is too long or damp, as cutting too low or in unfavorable conditions may impede the mower's cutting performance.
Before performing any maintenance, disconnect the spark plug wire to prevent accidental starting. To clean the cutting blade, turn the lawnmower on its side (with the air filter facing up) and use a brush or compressed air to remove any grass clippings or debris. Regularly inspect the blade for signs of wear or damage and replace it if necessary.
Check if the cutting blade is securely fastened. A loose or unbalanced blade can cause excessive vibrations. Additionally, inspect the wheels for any damage or debris stuck between them. If vibrations persist, it is recommended to consult a qualified technician to diagnose and resolve the issue.
Yes, the Husqvarna LC 151 has a cutting clearance adjustment. This means that the user can easily adjust the height of the blades to achieve their desired cutting length.
The Husqvarna LC 151 has 7 height positions. This allows the user to choose from a range of cutting heights to accommodate different types of grass or lawn conditions.
Yes, the Husqvarna LC 151 comes with a grass catcher. With a grass collecting volume of 65 L, it can efficiently collect and contain the grass clippings, reducing the need for additional clean-up.
Yes, the Husqvarna LC 151 is a rear wheel drive mower. This design provides better traction and maneuverability, especially on uneven or sloping terrain.
Yes, the Husqvarna LC 151 has a mulching function. This means that it can finely chop the grass clippings and disperse them back onto the lawn, acting as a natural fertilizer and improving the overall health of the grass.
Yes, the manual of the Husqvarna LC 151 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Husqvarna and is the answer not in the manual?
Question and answer
Number of questions: 2My machine ran out of gas and stopped working, what should I do? I've already added gas and it still doesn't work the same.
I bought a LC151 Husqvarna push mower and having issue with excess clippings. Did this machine come with a mulcing or standard blade?