View the manual for the Husqvarna KLIPPO LB 448 here, for free. This manual comes under the category lawnmowers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Husqvarna KLIPPO LB 448 or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Husqvarna KLIPPO LB 448 below.
When the grass is longer than 4.5cm, the grass should be cut. The ideal length is between 3 and 4.5cm.
In the spring, the grass should be cut every week, while in the summer once every two weeks is sufficient.
You can, but the result is better in dry weather. When the grass is wet, grass clumps can easily form and clog the mower.
To assemble and adjust the handle of the Husqvarna KLIPPO LB 448 lawnmower, follow these steps: 1. Remove the handle nut and washer from the plate on the upper handle. 2. Position the upper handle on top of the lower handle, ensuring the wires are not caught or damaged. 3. Attach the washer and handle nut securely. 4. Turn the handle to the side for optimal operation near a wall. 5. Adjust the handle to the appropriate height: a) For KLIPPO LB 448 and KLIPPO LB 448Q, use the adjustment wheels on the chassis to adjust the handle vertically. b) For KLIPPO LB 442Q, loosen the nut, adjust the handle vertically, and tighten the nut. c) For KLIPPO LB 553SQe, lift the handle adjustment stay and move the handle forward or rearward to set the handle height in 2 positions. These steps will help you assemble and adjust the handle of your lawnmower effectively.
To ensure that the cutting equipment is correctly attached and adjusted before operating the Husqvarna KLIPPO LB 448 lawnmower, follow these steps: 1. Make sure the blade and all covers are attached correctly to prevent personal injury. 2. Check that the blade does not hit objects like stones and roots to avoid damage and engine shaft bending. 3. Stop the product immediately if the blade hits an object or vibrations occur, and inspect for damages. 4. Do not attach the engine brake handle permanently to the handle when the engine is started. 5. Place the lawnmower on a stable, flat surface before starting it to prevent the blade from hitting the ground or other objects. 6. Always operate the lawnmower from behind, keeping both hands on the handle and away from the rotating blades. 7. Stop the engine before changing the cutting height and never make adjustments with the engine running. 8. Ensure the cutting equipment does not rotate when the engine is stopped.
Yes, the manual of the Husqvarna KLIPPO LB 448 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Husqvarna and is the answer not in the manual?
Question and answer
Number of questions: 0