Humminbird HELIX 5 manual

Humminbird HELIX 5
8.5 · 17
PDF manual
 · 215 pages
English
manualHumminbird HELIX 5
19

Control Head Keys

T
he available keys are determined by your control head model.
Your control head might not include all the keys shown in this
section.
ZOOM IN (+)/ZOOM OUT () KEYS
Press the ZOOM keys to change the scale of the view.
For a closer view, press the ZOOM IN (+) key. For a
wider view, press the ZOOM OUT (-) key. You can also
magnify the cursor selection. You can also press
these keys to adjust the sensitivity in sonar views
(Sonar, DI, SI).

VIEW KEY

Press and hold the VIEW key to open the Views
X-Press menu, or press the VIEW key repeatedly until
the view you want to use is displayed on the screen.
Press the EXIT key to display the previous view. See
Views for details.

CHECK/INFO KEY

In the Chart View, press the CHECK/INFO key to see
information about the cursor position or about
objects located near the cursor position. If the cursor
is not active, the Chart Info submenu will open. See
Navigation Overview for details.
In Sonar Views, press this key once to switch
frequencies (if available). See each sonar section for
details.

CURSOR CONTROL KEY

(LEFT, RIGHT, UP, or DOWN Cursor keys)
Press the arrows on the Cursor Control key
to move through the menu system, select
menus, and change or activate menu
settings. See Menu System Overview for
details.
Also, press any arrow on the Cursor Control
key to move the cursor on the view.
To move the cursor diagonally, press in
between the arrows.

MARK KEY

Press the MARK key to save a waypoint at the boat
p
osition. If the cursor is active, press the MARK key
twice to save a waypoint at the cursor position. See
Navigation Overview for details.
If a microSD card is installed, press and hold this key
to save a Screen Snapshot. See Manage Screen
Snapshots and Recordings for details.

MENU KEY

To open the X-Press Menu for the on-screen view and
operation mode, press the MENU key once. To open
the Main Menu, press the MENU key twice. See Menu
System Overview for details.
GO TO/MAN OVERBOARD (MOB) KEY
With an active cursor, press the GOTO key twice to
create a waypoint and start navigation towards that
waypoint. If the cursor is not active, press the GOTO
key, and choose from the saved navigation data.
To start Man Overboard navigation, press and hold the
GOTO key. See Navigation Overview and Man
Overboard (MOB) Navigation for details.

EXIT KEY

Press the EXIT key to close a menu, close a dialog box,
turn off an alarm, or exit Cursor mode.
Also, press the EXIT key to scroll through the View
Rotation in reverse order. See Views for details.

POWER KEY

Press the POWER key to power on the control head.
To power off, press and hold the POWER key.
During operation, press the POWER key. The backlight
can be adjusted from this menu. You can also turn
on/off Sonar, change the view background color, and
start Standby mode.
The Control Head

View the manual for the Humminbird HELIX 5 here, for free. This manual comes under the category fish finders and has been rated by 17 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Humminbird HELIX 5 or do you need help? Ask your question here

Need help?

Do you have a question about the Humminbird and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 34
R
Rick September 6, 2022

Does basic helix 5 g2 have fish id ?

1 comment
E
Emma of manua.lsOctober 24, 2023

Yes, the Humminbird HELIX 5 fish finder (model number 1435440) includes a feature called Fish ID. Fish ID+ utilizes advanced signal processing to interpret sonar returns and show fish symbols on the Sonar View when certain conditions are met. You can enable or disable Fish ID+ in the Sonar settings menu. When Fish ID+ is enabled, fish symbols will be displayed on the Sonar View, with the color of the symbols indicating the location of the sonar beam. The depth of the fish is also shown above the symbol. You can adjust the sensitivity for fish detection and receive alerts with the Fish ID Alarm enabled. To adjust the Fish ID sensitivity, go to the Sonar settings menu and select Fish ID Sensitivity. To activate the Fish ID Alarm, go to the Alarms settings menu and select Fish ID Alarm.

This answer is automatically generated
M
MICHAEL YOQUELETJune 9, 2022

helix x 5 di g2 how to use Iam disappoint try to set it up i have try every thing,

M
MichaelJuly 3, 2023

We just got a new boat with the hummingbird helix5. The depth finder is way off it is showing 300 feet to 1200 for our lake that is 50 feet at the deepest. Is there a way to reset it. The lake has a lot of shallow areas and it would be good to have it as a backup until we learn lake better

W
Wayne BoyleJuly 12, 2023

What is the part number for the Helix 5 depth/fish finder. Also where can I order a replacement from.

P
Pedro SantosAugust 8, 2023

Hi I have a Helix5.DI-GPS, s/n 15050603. I need to have units in meters but the menu only alow Ft and Fathoms, Its possible to have units in meters? Best rgds

K
Kenneth MihokJune 5, 2024

How do I clear old info from helix 5

T
Tim staats September 11, 2023

My brother and I just bought a brand new hummingbird Helix 5 installed in the boat went through all the setup everything works fine on it everything except it won't find a fish it won't murder fish everything else on it works perfect just won't find a fish look at that big

H
Heinz Karl SyrchJune 12, 2024

my fish finder section has goin blank the GPS works fine

E
EuiAugust 5, 2022

My display is in Russian. How do I scroll to a screen and change into English?

My display is in Russian. 
How do I scroll to a screen and change into English?
zoom-in
View photo
1 comment
A
Ashley AlexanderAugust 8, 2023

On start up the pic of the hummingbird comes up then that’s all pulled the power plug for 30 minutes still doing it

M
MiltAugust 16, 2022

I cannot get the menu to change from normal to advanced on my helix five chirp GPS G2

The Humminbird HELIX 5 is a fish finder device that offers advanced features for an enhanced fishing experience. This fish finder is designed to provide accurate and detailed information about underwater structures, depth, and fish location. The HELIX 5 features a high-resolution color display that allows for easy viewing of sonar readings, even in bright sunlight. With its precision internal GPS, this fish finder can quickly and accurately determine your current position and mark waypoints for future reference. Equipped with DualBeam PLUS sonar technology, the HELIX 5 provides a wide coverage area and detailed images of the underwater environment. The device operates at frequencies of 200 kHz and 83 kHz to deliver clear and reliable sonar readings. With its built-in UniMap cartography, the HELIX 5 offers detailed maps of various bodies of water, including rivers, lakes, and coastlines. This feature allows you to locate specific areas, navigate accurately, and identify potential fishing spots. The Humminbird HELIX 5 is also equipped with advanced sonar features such as SwitchFire, which allows you to customize your sonar return appearance according to your fishing preferences. Additionally, it has CHIRP sonar technology, which provides even more detailed images and enhanced target separation. The device is built with durable materials, ensuring its reliability and longevity. Its intuitive interface and user-friendly controls make it easy to use for both beginners and experienced anglers. In conclusion, the Humminbird HELIX 5 is a versatile fish finder that offers advanced features, accurate sonar readings, and detailed maps. It provides an invaluable resource for anglers of all skill levels, helping them locate fish and improve their fishing efficiency.

General
BrandHumminbird
ModelHELIX 5 | 409590-1
Productfish finder
EAN0082324048999, 0641676165848, 0974566059195
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Humminbird HELIX 5 below.

How can I adjust the sensitivity on my Humminbird HELIX 5 fish finder?

Use the sensitivity control to adjust the strength of the sonar signal to optimize the display for your fishing conditions. Start with a lower sensitivity and gradually increase it until you get a clear and detailed view of the underwater environment.

How do I interpret the sonar returns on my Humminbird HELIX 5?

The sonar returns appear as colored or grayscale images on the screen. Fish are usually represented as arches or fish icons, while structure and bottom contours are displayed as lines or various shapes. Refer to the color palette legend provided to understand the representation of different sonar returns.

What do I need to do if my fish finder is not turning on?

Firstly, check if the power cable is securely connected to the fish finder and the power source. Ensure that the power source is turned on and supplying electricity. If the issue persists, check the fuse in the power cable for any damages or try connecting the fish finder to a different power source.

How do I adjust the display settings on my Humminbird HELIX 5?

Navigate to the menu options and locate the Display settings. Here, you can adjust the brightness, contrast, color palette, and other visual settings to enhance the readability of the screen. Experiment with different settings to find the best configuration for your specific fishing environment.

How can I troubleshoot if my Humminbird HELIX 5 is not providing accurate depth readings?

Start by ensuring the transducer is properly installed and fully submerged in water. Check if any vegetation or debris is obstructing the transducer. If everything seems normal, navigate to the Sonar settings and perform a manual depth calibration to ensure accurate depth readings.

Is the manual of the Humminbird HELIX 5 available in English?

Yes, the manual of the Humminbird HELIX 5 is available in English .

Is your question not listed? Ask your question here

No results