Huawei Watch Ultimate Design manual

Huawei Watch Ultimate Design
9.3 · 1
PDF manual
 · 57 pages
English
manualHuawei Watch Ultimate Design
Smart mode: Monitors your heart rate based on your training load.
Real-time mode: The heart rate measurement will be performed once a second regardless
of the training load.
Using Real-time mode will increase the power consumption of your device, while using
Smart mode will adjust the heart rate measurement interval based on the activity
intensity and help to save power.
Resting heart rate measurement
Resting heart rate refers to your heartbeats per minute measured when you are awake, still,
and calm. It is an important indicator of your heart health. The best time to measure your
resting heart rate is immediately after you wake up in the morning.
Open the Huawei Health app, enter the device details screen, go to Health monitoring >
Continuous heart rate monitoring, and enable Continuous heart rate monitoring. The
device will then measure your resting heart rate automatically.
The resting heart rate data on the device will be cleared on its own at 00:00 (24-hour
clock) or 12:00 midnight (12-hour clock).
Your actual resting heart rate may not be displayed or accurately measured, as it is not
always the case that your heart rate was automatically measured at the best time.
Heart rate alerts
High heart rate alert
Enter the device details screen, go to Health monitoring > Continuous heart rate
monitoring, enable Continuous heart rate monitoring, and set High heart rate alert. You
will then receive an alert when you are not doing a workout and your heart rate stays above
your set limit for more than 10 minutes.
Low heart rate alert
Enter the device details screen, go to Health monitoring > Continuous heart rate
monitoring, enable Continuous heart rate monitoring, and set Low heart rate alert. You
will then receive an alert when you are not doing a workout and your heart rate stays below
your set limit for more than 10 minutes.
Heart rate measurement for a workout
During a workout, the device displays your real-time heart rate and heart rate zone, and
noties you when your heart rate exceeds the upper limit. For better training results, you are
advised to do a workout based on your heart rate zone.
To choose the calculation method for heart rate zones, open the Huawei Health app, go to
Me > Settings > Workout settings > Exercise heart rate settings, and set Heart rate
zones to Maximum heart rate percentage, HRR percentage, or LTHR percentage for
running, or either Maximum heart rate percentage or HRR percentage for other workout
modes.
Health Management
31

View the manual for the Huawei Watch Ultimate Design here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Huawei Watch Ultimate Design or do you need help? Ask your question here

Need help?

Do you have a question about the Huawei and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Huawei Watch Ultimate Design is a smartwatch equipped with a 1.39 inch AMOLED display and a resolution of 454 x 454 pixels. This watch features a classic design, with a stainless steel case and a ceramic bezel that is scratch resistant. It is available in different finishes, such as black, stainless steel, and rose gold. The strap is interchangeable and comes in different materials, including leather, metal, and fluoroelastomer. Powered by the Qualcomm Snapdragon Wear 2100 processor, the Huawei Watch Ultimate Design runs on the Android Wear 2.0 operating system. It includes sensors such as GPS, accelerometer, gyroscope, and heart rate monitor. This watch can be connected to a smartphone via Bluetooth or WiFi, allowing users to access their notifications, messages, and calls directly from their wrist. It is also compatible with different apps, such as Google Assistant, Google Translate, and Uber. The Huawei Watch Ultimate Design is water resistant up to 50 meters and includes a 420mAh battery that can last up to two days with regular use. This watch is a stylish and reliable accessory for those who want to stay connected and track their fitness at the same time.

General
BrandHuawei
ModelWatch Ultimate Design | 55020BDY
Productsmartwatch
EAN6942103103636
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display typeDigital
Display diagonal1.5 "
Display technologyAMOLED
Display resolution466 x 466 pixels
Touchscreen-
Pixel density311 ppi
Design
Market positioningSmartwatch
ShapeRound
Watch case colorBlack, Gold
Band colorBlack, Gold
Band size-
Watch case materialCeramic, Gold
Band materialTitanium
Lens materialSapphire
Water resistance10 ATM
Watch case size49.4 mm
Weight & dimensions
Width49.4 mm
Depth49.4 mm
Thickness13 mm
Weight78 g
Features
GyroscopeYes
AccelerometerYes
MagnetometerYes
Heart rate monitorYes
Heart rate sensor typeOptical
BarometerYes
Skin temperature sensorYes
Ambient light sensorYes
Electronic compassYes
StopwatchYes
Calories burnedYes
Recommended activityFitness
Blood oxygen sensorYes
Caller IDYes
PedometerYes
Network
Mobile network connectionNo
GPS (satellite)Yes
Ports & interfaces
BluetoothYes
Near Field Communication (NFC)Yes
Bluetooth Low Energy (BLE)Yes
Bluetooth version5.2
USB portNo
Wi-FiNo
Headphone connectivityNo
Performance
Built-in microphoneYes
Built-in speaker(s)Yes
Built-in cameraNo
FM radioNo
Operational conditions
Operating temperature (T-T)-20 - 45 °C
Power
Battery typeBuilt-in battery
Battery life (max)14 h
Battery technology-
Battery capacity530 mAh
Packaging content
Charging baseYes
Quick installation guideYes
Packaging data
Package width140 mm
Package depth140 mm
Package height65 mm
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Huawei Watch Ultimate Design below.

What is the weight of the Huawei Watch Ultimate Design?

The Huawei Watch Ultimate Design has a weight of 78 g.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is the screen size of the Huawei Watch Ultimate Design?

The screen size of the Huawei Watch Ultimate Design is 1.5 ".

What is the screen resolution of the display of the Huawei Watch Ultimate Design?

The screen resolution of the Huawei Watch Ultimate Design is 466 x 466 pixels.

What is the width of the Huawei Watch Ultimate Design?

The Huawei Watch Ultimate Design has a width of 49.4 mm.

What is the depth of the Huawei Watch Ultimate Design?

The Huawei Watch Ultimate Design has a depth of 49.4 mm.

Does Huawei Watch Ultimate Design have a round display?

Yes, Huawei Watch Ultimate Design has a round display. This gives it a classic and sleek look, which is preferred by many users over square or rectangular display designs.

What is the thickness of Huawei Watch Ultimate Design?

The thickness of Huawei Watch Ultimate Design is 13 mm. This is considered to be relatively slim, which makes it comfortable to wear and less bulky on the wrist.

Does Huawei Watch Ultimate Design have a sapphire lens?

Yes, Huawei Watch Ultimate Design has a sapphire lens. Sapphire is known for its exceptional scratch resistance, providing added protection to the watch face in daily usage.

Does Huawei Watch Ultimate Design have a heart rate monitor?

Yes, Huawei Watch Ultimate Design has a heart rate monitor. This feature allows users to track their heart rate during workouts, enabling them to monitor their fitness levels and make informed decisions about their health.

Is Huawei Watch Ultimate Design made of ceramic and gold?

Yes, Huawei Watch Ultimate Design has a watch case made of ceramic and gold. This combination of materials adds a touch of luxury and premium feel to the watch, making it visually appealing to users.

How do I troubleshoot app management issues on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot app management issues on the Huawei Watch Ultimate Design smartwatch, you can follow these steps: 1. Open the Huawei Health app on your phone and tap on "Devices" to access the device details screen. 2. Select your Huawei Watch Ultimate Design from the list of devices. 3. On the device details screen, tap on "AppGallery" and go to "Manager" > "Installation manager" > "UNINSTALL" to uninstall apps from your watch. Note: Pre-installed apps cannot be uninstalled. 4. If you have disabled the AppGallery service in the Huawei Health app, you will need to enable it again. Tap on "AppGallery" and follow the onscreen instructions to grant the required permission. 5. To adjust the sequence of apps in the app list, press the Up button on your watch to open the app list, and then drag an app up or down to rearrange its position. If you are experiencing issues with a third-party app, try the following: - Add the app to the background protection list in Phone Manager/Optimizer. - Go to Settings > Battery on your phone, select the app in "Battery usage by app," and enable "Auto-launch," "Secondary launch," and "Run in background." - If the app still doesn't work, uninstall and reinstall it. For Bluetooth voice call troubleshooting, ensure that your wearable device is linked with the Huawei Health app. You can add contacts and make calls through the app. Please note that these steps are specific to the Huawei Watch Ultimate Design smartwatch and may vary for other models.

Why can't I make Bluetooth voice calls on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot Bluetooth voice call issues on the Huawei Watch Ultimate Design smartwatch, you can follow these steps: 1. Ensure that your watch is connected to your phone via Bluetooth and that the Bluetooth connection is stable. 2. Check if the Bluetooth earphones you are using support voice calls when paired with a smartwatch. Some earphones may only support voice calls when paired with a phone. 3. If you receive an incoming call on your watch and the audio channel switches to the watch's speaker, it means that the earphones do not support voice calls with the watch. In this case, pair the earphones with your phone and answer calls from there. 4. If you want to use Bluetooth earphones for voice calls on your watch, follow these steps: - Link your watch with the Huawei Health app and set your Bluetooth earphones to pairing mode. - Enter the watch's app list and go to Settings > Bluetooth. - If the watch has not been paired with any Bluetooth device, touch "Find devices," select the target Bluetooth earphones from the list, and follow the onscreen instructions to complete pairing. - If the earphones still do not support voice calls after pairing, try using them with your phone instead. Please note that the availability of Bluetooth voice call functionality may vary depending on the compatibility of the earphones and the watch model.

What should I do if I am unable to control music playback on the Huawei Watch Ultimate Design smartwatch?

If you are unable to control music playback on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Ensure that your watch is connected to the Huawei Health app on your phone. 2. Open the Huawei Health app on your phone and go to the device details screen. 3. Tap on "Music" and check if the music control feature is enabled. If not, toggle on the switch for "Control phone music". 4. If you are using a third-party music app, make sure it is compatible with the Huawei Watch Ultimate Design. 5. If you have transferred music to your watch, ensure that the songs are added to the watch's music library. Open the Huawei Health app, go to the device details screen, and navigate to "Music" > "Manage music" > "Add songs" to add songs to your watch. 6. On your watch, access the app list and open the "Music" app or use another music app to control playback. Please note that the availability of music control features may vary depending on the compatibility of the music app and the watch model.

Why is the remote shutter feature not working on the Huawei Watch Ultimate Design smartwatch?

If the remote shutter feature is not working on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Make sure that your watch is linked with the Huawei Health app on your phone. Swipe down from the top of your watch's home screen and check if the connection indicator is displayed, indicating that your watch is connected to your phone. 2. Enter your watch's app list and open the "Remote shutter" app to enable your phone's camera. 3. On the watch screen, tap the shutter button to take a photo. You can also switch between a 2-second and 5-second timer by tapping the timer button. 4. Ensure that the Huawei Health app is running in the background on your phone while using the remote shutter feature. 5. If the remote shutter feature still doesn't work, make sure that your watch and phone are within Bluetooth range and try restarting both devices. 6. If the issue persists, check for any available software updates for your watch and install them to ensure the best possible experience. Please note that the availability and functionality of the remote shutter feature may vary depending on the watch model and software version.

How can I troubleshoot issues with the voice assistant on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot issues with the voice assistant on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Check if the voice assistant wake-up button is functioning properly. Press the wake-up button on the watch to activate the voice assistant. 2. Ensure that the voice assistant broadcast feature is enabled. If disabled, the watch will not play voice messages. 3. Adjust the volume of the voice assistant by pressing the volume buttons on the paired phone. 4. If the AI Tips feature is enabled, the AI Tips card will display on the HUAWEI Assistant·TODAY screen. If disabled, the card will not appear. 5. If you are using Bluetooth earphones, make sure they are connected to the watch. Follow the instructions in the manual to pair the earphones with the watch. 6. Note that some earphones may not support voice calls when paired with a watch. If you receive an incoming call on the watch, the audio channel will switch to the watch's speaker. To make voice calls using your earphones, pair them with your phone and answer calls from there. Please note that these troubleshooting steps are specific to the Huawei Watch Ultimate Design smartwatch and may vary for other models.

How do I troubleshoot app management issues on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot app management issues on the Huawei Watch Ultimate Design smartwatch, you can follow these steps: 1. Open the Huawei Health app on your phone and tap on "Devices" to access the device details screen. 2. Select your Huawei Watch Ultimate Design from the list of devices. 3. On the device details screen, tap on "AppGallery" and go to "Manager" > "Installation manager" > "UNINSTALL" to uninstall apps from your watch. Note: Pre-installed apps cannot be uninstalled. 4. If you have disabled the AppGallery service in the Huawei Health app, you will need to enable it again. Tap on "AppGallery" and follow the onscreen instructions to grant the required permission. 5. To ensure proper functionality of third-party apps, add them to the background protection list in the Phone Manager/Optimizer on your phone. Additionally, go to "Settings" > "Battery" and select the app in "Battery usage by app". Enable "Auto-launch", "Secondary launch", and "Run in background". 6. If a third-party app still doesn't work after adding it to the protected apps list, try uninstalling and reinstalling the app. By following these steps, you should be able to troubleshoot app management issues on your Huawei Watch Ultimate Design smartwatch.

Why can't I make Bluetooth voice calls on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot Bluetooth voice call issues on the Huawei Watch Ultimate Design smartwatch, you can follow these steps: 1. Ensure that your watch is connected to your phone via Bluetooth and that the Bluetooth connection is stable. 2. Check if the Bluetooth earphones you are using support voice calls. If they do not support voice calls, you will need to pair them with your phone instead. 3. If you receive an incoming call on your watch, the audio channel will switch to the watch's speaker. To make voice calls using your Bluetooth earphones, pair them with your phone and answer calls from there. 4. If you are unable to make or receive voice calls on your watch, try restarting both your watch and your phone. This can help refresh the Bluetooth connection and resolve any temporary issues. 5. Make sure that the volume on your watch and Bluetooth earphones is turned up and not muted. 6. If the issue persists, check for any available software updates for your watch and install them. Software updates can often include bug fixes and improvements for Bluetooth connectivity. By following these steps, you should be able to troubleshoot Bluetooth voice call issues on your Huawei Watch Ultimate Design smartwatch.

What should I do if I am unable to control music playback on the Huawei Watch Ultimate Design smartwatch?

If you are unable to control music playback on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Ensure that your watch is connected to your phone via Bluetooth and that the Bluetooth connection is stable. 2. Open the Huawei Health app on your phone and go to the device details screen. 3. Tap on "Music" and check if the music control feature is enabled. If not, toggle on the switch for "Control phone music". 4. Make sure that the music app on your phone is playing music. 5. Swipe right on the home screen of your watch to enter the HUAWEI Assistant·TODAY screen. 6. Touch the Music widget with a phone icon to access music playback controls. 7. On the music playback screen, you can adjust the volume, switch between songs, and view the playlist. 8. If you are using a third-party music app, make sure it is compatible with the Huawei Watch Ultimate Design and that it is running in the background on your phone. 9. If the issue persists, try restarting both your watch and your phone, and ensure that both devices are running the latest software updates. By following these steps, you should be able to troubleshoot issues with music playback control on your Huawei Watch Ultimate Design smartwatch.

Why is the remote shutter feature not working on the Huawei Watch Ultimate Design smartwatch?

If the remote shutter feature is not working on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Make sure that your watch is linked with the Huawei Health app on your phone. Swipe down from the top of your watch's home screen and check if the connection indicator is displayed, indicating that your watch is connected to your phone. 2. Enter your watch's app list and touch the "Remote shutter" app to enable your phone's camera. 3. On the watch screen, touch the shutter button to take a photo. You can also switch between a 2-second and 5-second timer by touching the corresponding button. 4. Ensure that the Huawei Health app is running in the background on your phone while using the remote shutter feature. 5. If the issue persists, try updating your watch to the latest software version to ensure the best possible experience. 6. Note that the remote shutter feature may only be supported in certain countries and regions. By following these steps, you should be able to troubleshoot the remote shutter feature on your Huawei Watch Ultimate Design smartwatch.

How can I troubleshoot issues with the voice assistant on the Huawei Watch Ultimate Design smartwatch?

To troubleshoot issues with the voice assistant on the Huawei Watch Ultimate Design smartwatch, you can try the following steps: 1. Check if the voice assistant wake-up button is functioning properly. Press the wake-up button on the watch to activate the voice assistant. 2. Ensure that the voice assistant broadcast feature is enabled. If disabled, the watch will not play voice messages. 3. Adjust the volume of the voice assistant by pressing the volume buttons on your paired phone. 4. If you are experiencing issues with Bluetooth earphones, make sure they are properly connected to the watch. Follow the instructions in the manual to pair your Bluetooth earphones with the watch. 5. Note that when you answer an incoming call on your watch, the audio channel will switch to the watch's speaker. To make voice calls using your earphones, pair them with your phone and answer calls from there. 6. If the issue persists, try restarting both your watch and your phone, and ensure that both devices are running the latest software updates. By following these steps, you should be able to troubleshoot issues with the voice assistant on your Huawei Watch Ultimate Design smartwatch.

Is the manual of the Huawei Watch Ultimate Design available in English?

Yes, the manual of the Huawei Watch Ultimate Design is available in English .

Is your question not listed? Ask your question here

No results