Huawei P60 manual

Huawei P60
9.3 · 1
PDF manual
 · 140 pages
English
manualHuawei P60
Take Burst Photos
Use Burst mode to take a sequence of photos in quick succession so you can choose the best
one.
1 Open Camera, select Photo mode, and make sure the rear camera is in use.

2 Press and hold the shutter button or one of the Volume buttons to take burst photos.

When shooting, you'll see a number in the
viewnder, which indicates how many photos
you've taken so far.
Burst shooting via Volume button pressing is only supported on certain phone models.

3 Release your nger to stop shooting.

Select the Burst Photos You Want to Keep

1 Open Gallery. Touch a burst photo (which is tagged with

), then touch .

2 Swipe through the burst photos, select the ones you want to keep, then touch and

follow the onscreen instructions.
To delete the whole burst photo, touch and hold to select the photo, then touch .
Take Timed Photos
The camera timer allows you to set a countdown so you can get into position after you have
touched the shutter button.
1 Go to Camera > > Timer and select a countdown.
2 Return to the viewnder and touch the shutter button. Your phone will take a photo when
the countdown ends.
Use Audio Control to Take Photos
You can use your voice to take photos without having to touch the shutter button.
1 Go to Camera > > Audio control, and select an option.

2 Go back to the viewnder, then say your command to take a photo.

Shoot One-Handed Photos or Videos

When shooting a photo or video with just one hand, swipe up from the bottom of the
Camera app screen to display the Camera Quick Menu, which gives you access to commonly-
used features.
Open Camera, touch under the Shutter button, or swipe up near the Shutter button, to
display the Camera Quick Menu, and touch the desired option.
Camera and Gallery
73

View the manual for the Huawei P60 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Huawei P60 or do you need help? Ask your question here

Need help?

Do you have a question about the Huawei and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Huawei P60 is a smartphone that features a 6.1-inch display and runs on the Android operating system. It is equipped with a Kirin 980 processor and comes with 8GB of RAM and 128GB of internal storage. The device has a dual camera setup on the back, with a 40MP main sensor and a 20MP secondary sensor. It also has a 24MP front-facing camera for taking selfies. The phone is powered by a 4,000mAh battery and offers fast charging capabilities. It supports dual SIM cards and comes with various connectivity options such as Wi-Fi, Bluetooth, and NFC. The Huawei P60 has a sleek and stylish design, with a glass back and aluminum frame. It also features a fingerprint sensor for added security. Additionally, the phone comes with various software features such as face unlock and gesture controls.

General
BrandHuawei
ModelP60
Productphone
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Huawei P60 below.

How can I ensure that the basic gestures are working properly on my Huawei P60 phone?

To ensure that the basic gestures are working properly on your Huawei P60 phone, follow these steps: 1. Go to Settings > System & updates > System navigation and ensure that Gestures is selected. 2. Return to the previous screen by swiping in from the left or right edges. 3. Go back to the home screen by swiping up from the bottom. 4. View recent tasks by swiping up from the bottom of the screen and holding. 5. Close an app by swiping up on an app preview when viewing recent tasks. 6. Switch between apps by sliding across the bottom edge of the screen or swiping across the bottom of the screen in an arc. 7. Enable knuckle gestures by going to Settings > Accessibility features > Shortcuts & gestures and enabling Take screenshot and Record screen. 8. Take a screenshot by knocking twice on the screen with a knuckle. 9. Capture a scrolling screenshot by knocking on the screen with a knuckle and drawing an "S". 10. Capture part of the screen by knocking and drawing an enclosed area with a knuckle.

I am having trouble using the Phone Clone feature on my Huawei P60 phone. What should I do?

To troubleshoot the Phone Clone feature on your Huawei P60 phone, follow these steps: 1. On your old device, select the data you want to clone and proceed with the transfer. 2. On your new phone, open the Phone Clone app or go to Settings > System & updates > Phone Clone, select "This is the new device," and choose iPhone/iPad. 3. Download and install Phone Clone on your old device from the Huawei official website. 4. Open the Phone Clone app on your old device, select "Transfer data to a Huawei phone," and follow the onscreen instructions to connect the devices by scanning the code. 5. Select the data you wish to clone on your old device and complete the data cloning process.

My Huawei P60 phone screen is not locking automatically as it should. How can I fix this issue?

1. Go to Settings > Display & brightness > Sleep and set the screen timeout duration to enable auto-lock feature. 2. Manually lock the screen by pressing the Power button or by using the Screen Lock icon on the home screen. 3. Ensure your device is updated to the latest system version. 4. Enable the "Keep screen on while looking" feature in Settings > Accessibility features > Smart Sensing. 5. You can turn on the screen by pressing the Power button or by using gestures like Raise to wake, Double-tap to wake, or Show palm to wake in Settings > Accessibility features > Shortcuts & gestures > Wake screen.

Is the manual of the Huawei P60 available in English?

Yes, the manual of the Huawei P60 is available in English .

Is your question not listed? Ask your question here

No results