HP ProDesk 400 G5 PC manual

HP ProDesk 400 G5 PC
9.8 · 2
PDF manual
 · 55 pages
English
manualHP ProDesk 400 G5 PC

Upgrading system memory

The computer comes with double data rate 4 synchronous dynamic random access memory (DDR4-SDRAM)
dual inline memory modules (DIMMs).
The memory sockets on the system board are populated with at least one preinstalled memory module. To
achieve the maximum memory support, you can populate the system board with up to 32-GB of memory
congured in a high-performing dual-channel mode.
For proper system operation, the DIMMs must adhere to the following specications:
Industry-standard 288-pin
Unbuered non-ECC PC4-17000 DDR4-2133 MHz-compliant
1.2 volt DDR4-SDRAM memory modules
CAS latency 15 DDR4 2133 MHz (15-15-15 timing)
Mandatory JEDEC SPD information
The computer supports the following:
512 Mb, 1 Gb, 2 Gb, and 4 Gb non-ECC memory technologies
Single-sided and double-sided memory modules
Memory modules constructed with x8 and x16 DDR devices; memory modules constructed with x4
SDRAM are not supported
NOTE: The system does not operate properly if you install unsupported memory modules.

Installing a memory module

There are two memory sockets on the system board, with one socket per channel. The sockets are labeled
DIMM1 and DIMM3. Socket DIMM1 operates in memory channel B. Socket DIMM3 operates in memory channel
A.
The system will automatically operate in single-channel mode, dual-channel mode, or ex mode, depending
on how the DIMMs are installed.
NOTE: Single-channel and unbalanced dual-channel memory congurations will result in inferior graphics
performance.
The system will operate in single-channel mode if the DIMM sockets are populated in one channel only.
The system will operate in a higher-performing dual-channel mode if the total memory capacity of the
DIMMs in Channel A is equal to the total memory capacity of the DIMMs in Channel B. The technology and
device width can vary between the channels. For example, if Channel A is populated with two 1 GB
DIMMs and Channel B is populated with one 2 GB DIMM, the system will operate in dual-channel mode.
The system will operate in ex mode if the total memory capacity of the DIMMs in Channel A is not equal
to the total memory capacity of the DIMMs in Channel B. In ex mode, the channel populated with the
least amount of memory describes the total amount of memory assigned to dual channel and the
remainder is assigned to single channel. For optimal speed, the channels should be balanced so that the
largest amount of memory is spread between the two channels. If one channel will have more memory
than the other, the larger amount should be assigned to Channel A. For example, if you are populating
the sockets with one 2 GB DIMM, and three 1 GB DIMMs, Channel A should be populated with the 2 GB
14 Chapter 2 Hardware upgrades

Manual

View the manual for the HP ProDesk 400 G5 PC here, for free. This manual comes under the category desktops and has been rated by 2 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the HP ProDesk 400 G5 PC or do you need help? Ask your question here

Need help?

Do you have a question about the HP and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

HP ProDesk 400 G5 PC specifications

Below you will find the product specifications and the manual specifications of the HP ProDesk 400 G5 PC.

The HP ProDesk 400 G5 PC is a desktop computer manufactured by HP. It features a compact and functional design suitable for use in various work environments. The PC is equipped with an Intel Core processor, offering reliable performance for everyday tasks. It also comes with ample storage space, allowing users to store a large amount of data and files. In terms of connectivity, the HP ProDesk 400 G5 PC offers a range of ports including USB, HDMI, VGA, and Ethernet, providing users with options for connecting various devices and peripherals. The PC also comes with integrated graphics, enabling users to display high-quality visuals on their monitor. Additionally, the HP ProDesk 400 G5 PC is designed to be easy to set up and use, making it suitable for both experienced and novice users. The PC also offers security features such as password protection and encryption, helping to protect sensitive data and information. Overall, the HP ProDesk 400 G5 PC is a reliable desktop computer that is well-suited for everyday use in a professional or personal setting.

General
BrandHP
ModelProDesk 400 G5 PC
Productdesktop
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the HP ProDesk 400 G5 PC below.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How do I clean my keyboard?

Hold the keyboard upside down and use a can of compressed air to blow away the dirt. The keys can even be cleaned with a damp cloth.

How can I upgrade the hardware of the HP ProDesk 400 G5 PC desktop?

To upgrade the hardware of the HP ProDesk 400 G5 PC desktop, follow these steps: 1. Before performing any upgrades, make sure to read all the applicable instructions, cautions, and warnings in the manual. This will ensure your safety and prevent any damage to the computer. 2. Disconnect the power cord from the AC outlet and allow the internal system components to cool before touching them. This will reduce the risk of electrical shock or burns. 3. Use a Torx T15 or flat-bladed screwdriver for many of the installation procedures described in the manual. Make sure you have the necessary tools before starting the upgrade process. 4. To prevent damage from static electricity, discharge yourself by briefly touching a grounded metal object before beginning the upgrade procedures. This will protect the electrical components of the computer. 5. When the computer is unplugged from the power source, open the computer enclosure carefully. This will give you access to the internal components that can be upgraded. 6. Follow the specific instructions provided in the manual for the hardware upgrade you want to perform. This may include installing additional RAM, upgrading the storage drive, or adding expansion cards. 7. Once the hardware upgrade is complete, securely replace and close the computer enclosure. By following these steps, you can successfully upgrade the hardware of your HP ProDesk 400 G5 PC desktop.

Where can I find important information about the manual for the HP ProDesk 400 G5 PC desktop?

In the manual for the HP ProDesk 400 G5 PC desktop, you can find important information in the following sections: 1. About This Book: This section provides essential details about the manual itself. It may include warnings, cautions, and supplemental information that you need to be aware of before using the manual. 2. Safety Warning Notice: This section highlights important safety precautions that you should follow while using the HP ProDesk 400 G5 PC desktop. It provides crucial information to ensure your safety and prevent any potential hazards. By referring to these sections in the manual, you can access important information about the manual itself and the safety guidelines for using the HP ProDesk 400 G5 PC desktop.

How can I upgrade the hardware of the HP ProDesk 400 G5 PC desktop?

To upgrade the hardware of the HP ProDesk 400 G5 PC desktop, follow these steps: 1. Before performing any upgrades, make sure to read all the instructions, cautions, and warnings in the manual to ensure your safety. 2. Disconnect the power cord from the AC outlet and allow the internal system components to cool before touching them. 3. Use a Torx T15 or flat-bladed screwdriver for many of the installation procedures described in the manual. 4. To prevent damage to the computer or optional equipment, ensure that you are discharged of static electricity by briefly touching a grounded metal object before beginning the upgrade procedures. 5. When the computer is plugged into an AC power source, voltage is always applied to the system board. Therefore, it is crucial to disconnect the power cord from the power source before opening the computer to prevent damage to internal components. By following these steps, you can safely and effectively upgrade the hardware of your HP ProDesk 400 G5 PC desktop.

Where can I find important information about the manual for the HP ProDesk 400 G5 PC desktop?

In the manual for the HP ProDesk 400 G5 PC desktop, you can find important information in the following sections: 1. About This Book: This section provides essential details about the manual, including warnings, cautions, and supplemental information. It is usually located at the beginning of the manual and contains important instructions for safe and proper usage of the product. 2. Safety Warning Notice: This section highlights important safety precautions that you should be aware of when using the HP ProDesk 400 G5 PC desktop. It covers potential hazards and guidelines to ensure your safety while operating the device. By referring to these sections in the manual, you can access important information about the HP ProDesk 400 G5 PC desktop, including safety guidelines and additional instructions for usage.

Is the manual of the HP ProDesk 400 G5 PC available in English?

Yes, the manual of the HP ProDesk 400 G5 PC is available in English .

Is your question not listed? Ask your question here

No results