HP OfficeConnect OC20 manual

HP OfficeConnect OC20
(1)
  • Number of pages: 4
  • Filetype: PDF

OfficeConnect OC20

Access Point

Installation Guide

Rev 06 | March 2018 1
The OfficeConnect OC20 wireless access points (APs) support IEEE802.11ac standards for high-performance WLAN, and are equipped with two radios. Multiple-in, Multiple-output (MIMO) technology allows these APs to deliver high-performance 802.11n 2.4 GHz and 802.11ac 5 GHz functionality, while also supporting 802.11a/b/g wireless services.The OC20 access points provide the following capabilities:
Wireless transceiver
IEEE 802.11a/b/g/n/ac operation as a wireless access point
or air monitor
Compatibility with IEEE 802.3af PoE
Centralized management configuration and upgrade
Integrated Bluetooth Low Energy (BLE) Radio
Package Contents
OC20 access point
Ceiling Rail Adapter (spare: AP-220-MNT-C1)
AP-220-MNT-W1W
Quick Start Guide
!
This device must be professionally installed and serviced
by a trained ACMP or similar HPE-certified technician.
HPE access points are classified as radio transmission
devices, and are subject to government regulations of the
host country. The network administrator(s) is/are
responsible for ensuring that configuration and operation
of this equipment is in compliance with their country’s
regulations. For complete list of approved channels in
your country, refer to the refer to the ArubaOS
Downloadable Regulatory Table Release Notes at http://
h20565.www2.hpe.com/hpsc/doc/public/
display?docId=a00026718en_us.
Inform your supplier if there are any incorrect, missing, or
damaged parts. If possible, retain the carton, including
the original packing materials. Use these materials to
repack and return the unit to the supplier if needed.
Software
OC20 Hardware Overview
Figure 1 Front
LEDs
The OC20 access points have two LEDs that indicate the system and radio status of the device. These two LEDs can be configured into three separate modes:
Normal mode (by default): See Table 1
Both LEDs off
Blink mode: Both LEDs blink green (synchronized)
!
Access points are radio transmission devices and are
subject to governmental regulation. Network
administrators responsible for the configuration and
operation of access points must comply with local
broadcast regulations. Specifically, access points must
use channel assignments appropriate to the location in
which the access point will be used.
Table 1 OC20 LEDs Status in Normal Mode
LED Color/State Meaning
System
Status
(Left)
Off Device powered off
Green-
Blinking
Device booting, not ready for use
Green- Solid Device ready for use, no restrictions
Green-
Flashing
Device ready for use, uplink negotiated in
sub optimal speed (<1Gbps)
Red- Solid System error condition
Radio
Status
(Right)
Off Device powered off, or both radios
disabled
Green- Solid Both radios enabled in access mode
Green-
Blinking
One radio enabled in access mode
Amber- Solid Both radios enabled in monitor mode
Amber-
Blinking
One radio enabled in monitor mode
Alternating
Green: one radio in access mode
Amber: one radio in monitor mode
System Status
Radio Status
HP OfficeConnect OC20

Need help?

Number of questions: 0

Do you have a question about the HP OfficeConnect OC20 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other HP OfficeConnect OC20 owners to properly answer your question.

View the manual for the HP OfficeConnect OC20 here, for free. This manual comes under the category Routers and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the HP OfficeConnect OC20 or do you need help? Ask your question here

HP OfficeConnect OC20 specifications

General
Brand HP
Model OfficeConnect OC20
Product Router
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the HP OfficeConnect OC20.

Is your question not listed? Ask your question here