HP LaserJet Pro 500 Color MFP M570DW manual

HP LaserJet Pro 500 Color MFP M570DW
6.1 · 1
PDF manual
 · 254 pages
English
manualHP LaserJet Pro 500 Color MFP M570DW
3. By default, the print driver displays the Copies & Pages menu. Open the menus drop-down list, and then

click the Color Options menu.

4. Click the HP EasyColor check box to clear it.
5. Open the Advanced settings.

6. Adjust the individual settings for text, graphics, and photographs.

7. Click the Print button.

Manual color options

Use manual color options to adjust the Neutral Grays, Halftone, and Edge Control options for text, graphics,

and photographs.

Setting description Setting options
Edge Control
The Edge Control setting determines the rendering of
edges. Edge control has two components: adaptive
halftoning and trapping. Adaptive halftoning increases
edge sharpness. Trapping reduces the effect of color-
plane misregistration by overlapping the edges of
adjacent objects slightly.
Off turns off both trapping and adaptive halftoning.
Light sets trapping at a minimal level. Adaptive halftoning is on.
Normal sets trapping at a medium level. Adaptive halftoning is on.
Maximum is the most aggressive trapping setting. Adaptive
halftoning is on.
Halftone
Halftone options affect color output clarity and
resolution.
Smooth provides better results for large, solid-filled print areas and
enhances photographs by smoothing color gradations. Select this
option when uniform and smooth area fills are important.
Detail is useful for text and graphics that require sharp distinctions
among lines or colors, or images that contain a pattern or a high level
of detail. Select this option when sharp edges and small details are
important.
Neutral Grays
The Neutral Grays setting determines the method for
creating gray colors used in text, graphics, and
photographs.
Black Only generates neutral colors (grays and black) by using only
black toner. This guarantees neutral colors without a color cast. This
setting is best for documents and grayscale viewgraphs.
4-Color generates neutral colors (grays and black) by combining all
four toner colors. This method produces smoother gradients and
transitions to other colors, and it produces the darkest black.

Match colors

The process of matching product output color to a computer screen is quite complex because printers and

computer monitors use different methods of producing color. Monitors display colors by light pixels using an
RGB (red, green, blue) color process, but printers print colors using a CMYK (cyan, magenta, yellow, and black)

process.

Several factors can influence the ability to match printed colors to those on a monitor. These factors include:

Paper

Printer colorants (inks or toners for example)

Printing process (inkjet, press, or laser technology for example)

Overhead lighting

84 Chapter 4 Print ENWW

Manual

View the manual for the HP LaserJet Pro 500 Color MFP M570DW here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the HP LaserJet Pro 500 Color MFP M570DW or do you need help? Ask your question here

Index

Need help?

Do you have a question about the HP and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

HP LaserJet Pro 500 Color MFP M570DW specifications

Below you will find the product specifications and the manual specifications of the HP LaserJet Pro 500 Color MFP M570DW.

General
BrandHP
ModelLaserJet Pro 500 Color MFP M570DW | 0886112935399
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the HP LaserJet Pro 500 Color MFP M570DW below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

How can I upgrade the firmware of the printer?

To upgrade the firmware of the HP LaserJet Pro 500 Color MFP M570DW printer, follow these steps: 1. Access the Home screen on the product control panel and tap the Setup button. 2. Navigate to the Service menu, then to LaserJet Update, and select Check For Updates Now. 3. Confirm by selecting Yes to allow the product to search for firmware upgrades. If an upgrade is detected, the process will begin automatically. To set the printer to automatically upgrade the firmware: 1. Access the Home screen on the product control panel and tap the Setup button. 2. Navigate to the Service menu, then to LaserJet Update, and select Manage Updates followed by Prompt Before Install. 3. Choose the Install automatically option to enable automatic firmware upgrades.

Why is the printer displaying a low toner warning message even though the toner cartridge is not empty?

To address the low toner warning message on your HP LaserJet Pro 500 Color MFP M570DW printer, follow these steps: 1. Access the Setup menu on the product control panel. 2. Navigate to System Setup, then Supply Settings, followed by Black Cartridge, and finally Very Low Setting. 3. Choose one of the options: - Select "Continue" to receive an alert that the toner cartridge is very low but continue printing. - Select "Stop" to halt printing until the toner cartridge is replaced. - Select "Prompt" to stop printing and receive a prompt to replace the toner cartridge, with options to remind you after a certain number of pages. 4. Note that once the toner cartridge reaches "Very Low," HP's Premium Protection Warranty on that cartridge expires. 5. Be aware of potential risks related to fax printing when the product is set to Stop or Prompt options.

Is the manual of the HP LaserJet Pro 500 Color MFP M570DW available in English?

Yes, the manual of the HP LaserJet Pro 500 Color MFP M570DW is available in English .

Is your question not listed? Ask your question here

No results