HP LaserJet Pro 500 Color MFP M570DW manual

HP LaserJet Pro 500 Color MFP M570DW
6.1 · 1
PDF manual
 · 254 pages
English
manualHP LaserJet Pro 500 Color MFP M570DW

Solve product software problems with Windows

A print driver for the product is not visible in the Printer folder
An error message was displayed during the software installation
The product is in Ready mode, but nothing prints

A print driver for the product is not visible in the Printer folder

1. Reinstall the product software.
NOTE: Close any applications that are running. To close an application that has an icon in the system
tray, right-click the icon, and select Close or Disable.
2. Try connecting the USB cable to a different USB port on the computer.

An error message was displayed during the software installation

1. Reinstall the product software.
NOTE: Close any applications that are running. To close an application that has an icon in the system
tray, right-click the icon, and select Close or Disable.
2. Check the amount of free space on the drive where you are installing the product software. If necessary,
free up as much space as you can, and reinstall the product software.
3. If necessary, run the Disk Defragmenter, and reinstall the product software.

The product is in Ready mode, but nothing prints

1. Print a configuration page, and verify the product functionality.
2. Verify that all of the cables are correctly seated and within specifications. This includes the USB and
power cables. Try a new cable.
3. Verify the IP address on the configuration page matches the IP address for the software port. Use one of
the following procedures:
Windows XP, Windows Server 2003, Windows Server 2008, and Windows Vista
a. Click Start.
b. Click Settings.
c. Click Printers and Faxes (using the default Start menu view) or click Printers (using the Classic
Start menu view).
d. Right-click the product driver icon, and then select Properties.
e. Click the Ports tab, and then click Configure Port.
f. Verify the IP address, and then click OK or Cancel.
g. If the IP addresses are not the same, delete the driver, and reinstall the driver using the correct IP
address.
ENWW Solve product software problems with Windows 227

Manual

View the manual for the HP LaserJet Pro 500 Color MFP M570DW here, for free. This manual comes under the category printers and has been rated by 1 people with an average of a 6.1. This manual is available in the following languages: English. Do you have a question about the HP LaserJet Pro 500 Color MFP M570DW or do you need help? Ask your question here

Index

Need help?

Do you have a question about the HP and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

HP LaserJet Pro 500 Color MFP M570DW specifications

Below you will find the product specifications and the manual specifications of the HP LaserJet Pro 500 Color MFP M570DW.

General
BrandHP
ModelLaserJet Pro 500 Color MFP M570DW | 0886112935399
Productprinter
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the HP LaserJet Pro 500 Color MFP M570DW below.

What is the best way to remove jammed paper from my printer?

It is best to gently pull the paper out of the printer. Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer.

How come my printer does not accept original cartridges?

Non-genuine cartridges may not be recognised by the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller.

How come my prints are of poor quality?

There can be various reasons for poor print quality. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended.

What is the difference between a laser printer and an inkjet printer?

A laser printer prints with a toner and an inkjet printer prints with ink.

How come my inkjet printer has black stripes?

In most cases, the inkjet printer cartridge is broken and the cartridge needs to be replaced.

What does DPI stand for?

DPI stands for Dots Per Inch and is the number of ink droplets (per inch) that end up on the paper when printing.

How can I upgrade the firmware of the printer?

To upgrade the firmware of the HP LaserJet Pro 500 Color MFP M570DW printer, follow these steps: 1. Access the Home screen on the product control panel and tap the Setup button. 2. Navigate to the Service menu, then to LaserJet Update, and select Check For Updates Now. 3. Confirm by selecting Yes to allow the product to search for firmware upgrades. If an upgrade is detected, the process will begin automatically. To set the printer to automatically upgrade the firmware: 1. Access the Home screen on the product control panel and tap the Setup button. 2. Navigate to the Service menu, then to LaserJet Update, and select Manage Updates followed by Prompt Before Install. 3. Choose the Install automatically option to enable automatic firmware upgrades.

Why is the printer displaying a low toner warning message even though the toner cartridge is not empty?

To address the low toner warning message on your HP LaserJet Pro 500 Color MFP M570DW printer, follow these steps: 1. Access the Setup menu on the product control panel. 2. Navigate to System Setup, then Supply Settings, followed by Black Cartridge, and finally Very Low Setting. 3. Choose one of the options: - Select "Continue" to receive an alert that the toner cartridge is very low but continue printing. - Select "Stop" to halt printing until the toner cartridge is replaced. - Select "Prompt" to stop printing and receive a prompt to replace the toner cartridge, with options to remind you after a certain number of pages. 4. Note that once the toner cartridge reaches "Very Low," HP's Premium Protection Warranty on that cartridge expires. 5. Be aware of potential risks related to fax printing when the product is set to Stop or Prompt options.

Is the manual of the HP LaserJet Pro 500 Color MFP M570DW available in English?

Yes, the manual of the HP LaserJet Pro 500 Color MFP M570DW is available in English .

Is your question not listed? Ask your question here

No results