manualHP Aruba AP-303

Aruba 303 Series Campus Access Points

Installation Guide

Rev03 | August 2018 1

The Aruba 303 Series campus access points support IEEE802.11ac Wave 2, delivering high performance with the

MU-MIMO (Multi-User Multiple-Input, Multiple-Output) technology, while also supporting 802.11a/b/g /n wireless

services. The 303 Series access points can be deployed in either a controller-based (ArubaOS) or controller-less

(InstantOS) deployment mode.

The 303 Series access points provide the following capabilities:

 IEEE 802.11a/b/g/n/ac operation as a wireless access point

 IEEE 802.11a/b/g/n/ac operation as a wireless air monitor

 Compatibility with IEEE 802.3af PoE

 Integrated Bluetooth Low Energy (BLE) radio

Package Contents

 303 Series Access Point

 Ceiling mount bracket (Spare: AP-220-MNT-C1 mount kit)

 Startup guide

 Declaration of Conformity for Europe

Hardware Overview

The following sections outline the hardware components of the 303 Series access points.

Figure 1 303 Series (front view)

Inform your supplier if there are any incorrect, missing, or damaged parts. If possible, retain the carton, including

the original packing materials. Use these materials to repack and return the unit to the supplier if needed.

System Status

Radio Status

View the manual for the HP Aruba AP-303 here, for free. This manual comes under the category routers and has been rated by 2 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the HP Aruba AP-303 or do you need help? Ask your question here

Need help?

Do you have a question about the HP and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other HP owners to provide you with a good answer.

maher • 9-11-2022No comments

I'm trying configure new AP, I can't find the ip to joine it

Answer this question

Number of questions: 1

The HP Aruba AP-303 router is a networking device that allows wireless connectivity to be broadcasted over an area. It has a compact design and is suitable for use in smaller spaces, such as homes or small offices. The router supports the latest Wi-Fi 6 standard, offering fast and reliable performance. With a maximum throughput of 1.775 Gbps, it can handle a large amount of data transfer. The router uses dual-band technology and supports both 2.4GHz and 5GHz frequencies. This allows for better network optimization and less interference. The HP Aruba AP-303 router includes four internal antennas for signal coverage. It also features built-in security protocols, such as WPA3, to ensure network safety. The router is easy to set up and manage through Aruba's cloud-based software, Aruba Central. It also includes a USB port for external device connectivity. Overall, the HP Aruba AP-303 router is a suitable option for those seeking a reliable and high-performing networking device in a smaller space.

General

	HP
	Aruba AP-303
	router
	English
	User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the HP Aruba AP-303 below.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

How can I change the wireless network name, also known as the SSID, on my HP Aruba AP-303 router?

To change the wireless network name, access the Aruba web interface by typing the IP address assigned to the router in your browser. Navigate to the wireless settings section, where you can modify the SSID and save the changes.

I'm experiencing poor wireless signal strength in certain areas of my home. How can I improve the coverage of my HP Aruba AP-303 router?

To enhance the wireless coverage, consider repositioning the router to a more central location in your home, away from obstructions. Alternatively, you can try adjusting the antenna orientation or adding a Wi-Fi range extender to amplify the signal strength.

Is it possible to set up a guest network on my HP Aruba AP-303 router? If so, how?

Absolutely! To create a guest network, access the Aruba web interface and navigate to the wireless settings section. Look for the guest network options and enable it. You can then customize the guest network settings and assign a separate password for your visitors.

I want to prioritize bandwidth for specific devices on my network. How can I achieve this with my HP Aruba AP-303 router?

To prioritize bandwidth for specific devices, access the Aruba web interface and navigate to the Quality of Service (QoS) settings. From there, you can assign higher priority levels to particular devices by specifying their IP addresses or MAC addresses.

My network speed seems slower than expected. How can I check the current connection speed on my HP Aruba AP-303 router?

You can determine the current connection speed on your router by accessing the Aruba web interface and navigating to the wireless settings section. Look for the connected devices and their corresponding data rates. This will provide insight into the current speed of each device connected to the router.