To receive more comprehensive assistance, register the
appliance on
www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are removed. For more
detailed instructions on how to remove them, see the Installation Guide.
CONTROL PANEL
WASH CYCLE TABLE
For all testing institutes:
2) Long cotton cycle: set programme 3 at temperature 40°C.
3) Long synthetics cycle: set cycle 4 at a temperature of 40°C.
* By selecting the 15 cycle and excluding the spin cycle, the washing machine will drain only.
** The duration of the wash cycles can be checked on the display.
*** If “Steam Hygiene” option is set, the duration of the wash cycles will increase.
The cycle duration indicated on the display or instruction manual is an estimate based on
standard conditions. The actual duration may vary in relation to several factors, such as
the temperature and pressure of the incoming water, ambient temperature, amount of
detergent, load quantity and type, load balancing and any additional options selected.
1)Test wash cycle in compliance with regulation1061/2010:
This cycle is designed for normally soiled cotton loads and is the most ecient in terms of
both electricity and water consumption; it should be used for garments washable at 60°C or
at 40°C. The actual washing temperature may dier from the indicated value.
PRODUCT DESCRIPTION
1.
3.
2.
5.
4.
7.
6.
8.
1. Top
2. Detergent dispenser drawer
3. Control panel
4. Handle
5. Porthole door
6. Drain pump (behind the plinth)
7. Plinth (removable)
8. Adjustable feet (2)
1. ON/OFF button
2.CHILD LOCKbutton
3. EXTRA TOUCH button
4. EXTRA TOUCH indicator lights
5. START/PAUSE button and indicator light
6. OPTION button and indicator light
7.DELAY STARTbutton
8. SPIN button
9. TEMPERATURE button
10. WASH CYCLE SELECTOR KNOB
Maximum load 8 kg
Power input in o mode 0.5 W / in left-on mode 8 W
Detergents and
Additives
Recommended
detergent
Residual
dampness %
Energy con-
sumption kWh
Total water l
Wash cycle
Temperature
Max.
spin speed
(rpm)
Max.
load
(kg)
Duration
(minutes)
Wash
Fabric
softener
PowderLiquid
DefaultRange
12
1
Mixed40°C - 40°C14008**
–
–––
2
Eco Cotton
(1)
60°C
60°C14008225
531,0455
40°C14008220
531,0392
3Cotton (2)40°C
- 60°C14008220
531,0392
4Synthetics (3)40°C
- 60°C12004,5175
530,5455
5Delicates40°C
- 40°C10004,5**
–
–––
6Wool40°C
- 40°C8002**
–
–––
7White40°C
- 90°C14008**
––––
8Duvet30°C
- 30°C10003,5**
–
–––
9Rapid 30 min30°C
- 30°C8004,5**
–
–––
10Full Load 45 min40°C
- 40°C12008**
–
–––
11Shirts40°C
- 40°C6002**
–
–––
12Baby40°C
- 40°C8004**
–
–––
13Anti Stain 40°40°C
- 40°C14008**
–
–––
14Anti Allergy60°C
- 60°C14005**
–––
15
Spin & Drain *––14008**–––––––
16
Rinse & Spin ––14008**–
–––––
Required dosage Optional dosage
DETERGENT DISPENSER DRAWER
Compartment *:
Do not insert detergent in this compartment.
Compartment 1: Washing detergent (powder
or liquid)
If liquid detergent is used, the removable plastic
partition A (supplied) should be used for proper
dosage.
If powder detergent is used, place the partition
into slot B.
Compartment 2: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “MAX” level.
! Use powder detergent for white cotton garments, for pre-washing, and
for washing at temperatures over 60°C.
! Follow the instructions given on the detergent packaging.
1
2
A
B
*
1
10
2
DISPLAY
4
5
6
7
8
9
3
View the manual for the Hotpoint NSWA 843C WW UK here, for free. This manual comes under the category Washing Machines and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Hotpoint NSWA 843C WW UK or do you need help? Ask your question here
Need help?
Do you have a question about the Hotpoint and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Hotpoint owners to provide you with a good answer.
Julia • 16-9-20211 comment
45 minutes cycle
Julia • 16-9-2021
45 minute cycle. I choose this cycle and check the temperature and spin. However when the cycle has finished the clothes are still full of water. Please advise correct programming. Thank you.
Answer this question
Bela Reed • 8-7-2021No comments
How to soak clothes in whitener etc as no prewashHotpint NSWA 843C WWW UK. Thank you
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hotpoint NSWA 843C WW UK below.
What temperature should I use for my laundry?
The washing label of your garment shows the recommended washing temperature.
Do I need to use an anti-scaling agent for my washing machine?
It is not necessary to use an anti-scaling agent. Scale deposits can be prevented by limiting washing at high temperatures and using the recommended amount of detergent per wash.
How do I prevent my washing machine from smelling?
Unpleasant odours can be avoided by occasionally washing at 60 degrees and using the recommended amount of detergent per wash.
What is the weight of the Hotpoint NSWA 843C WW UK?
The Hotpoint NSWA 843C WW UK has a weight of 74000 g.
What is the height of the Hotpoint NSWA 843C WW UK?
The Hotpoint NSWA 843C WW UK has a height of 850 mm.
What is the width of the Hotpoint NSWA 843C WW UK?
The Hotpoint NSWA 843C WW UK has a width of 595 mm.
What is the depth of the Hotpoint NSWA 843C WW UK?
The Hotpoint NSWA 843C WW UK has a depth of 605 mm.
Is the manual of the Hotpoint NSWA 843C WW UK available in English?
Yes, the manual of the Hotpoint NSWA 843C WW UK is available in English .
Need help?
Do you have a question about the Hotpoint and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Hotpoint owners to provide you with a good answer.
45 minutes cycle
45 minute cycle. I choose this cycle and check the temperature and spin. However when the cycle has finished the clothes are still full of water. Please advise correct programming. Thank you.
How to soak clothes in whitener etc as no prewashHotpint NSWA 843C WWW UK. Thank you
Number of questions: 2