Horizon Fitness Paros 2.0 manual

Horizon Fitness Paros 2.0
7.3 · 1
PDF manual
 · 236 pages
English
manualHorizon Fitness Paros 2.0
COMFORT 2.0 COMFORT 4.0 COMFORT 8.1 COMFORT R8.0
Read the BIKE GUIDE before using this OWNER’S MANUAL.
Lesen Sie das ERGOMETER-HANDBUCH, bevor Sie dieses BENUTZERHANDBUCH verwenden.
Lees de FIETSGIDS voor u deze GEBRUIKERSHANDLEIDING gebruikt.
Lisez le GUIDE DU VÉLO avant d’utiliser ce MANUEL DU PROPRIÉTAIRE.

OWNER’S MANUAL

BENUTZERHANDBUCH

GEBRUIKERSHANDLEIDING

MANUEL DU PROPRIÉTAIRE

View the manual for the Horizon Fitness Paros 2.0 here, for free. This manual comes under the category hometrainers and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Horizon Fitness Paros 2.0 or do you need help? Ask your question here

Need help?

Do you have a question about the Horizon Fitness and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandHorizon Fitness
ModelParos 2.0
Producthometrainer
EAN4713375364238
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Horizon Fitness Paros 2.0 below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I turn on the console of the Horizon Fitness Paros 2.0 hometrainer?

To turn on the console of the Horizon Fitness Paros 2.0 hometrainer, follow these steps: 1. Make sure there is no thin protective sheet of clear plastic on the overlay of the console. If there is, remove it before use. 2. Locate the LCD display windows on the console. These windows show various data such as time, distance, calories, speed, RPM, resistance level, heart rate, and workout profile. 3. Look for the ENERGY SAVER button on the console. This button is used to minimize energy consumption. If the machine has entered energy saver mode (after being in stand-by mode for 15 minutes), you can wake it up by pressing any button on the console. 4. Find the START AND STOP button on the console. Press this button to turn on the console and begin exercising. You can also use this button to pause your workout or resume exercising after a pause. To reset the console, hold the START AND STOP button for 3 seconds. 5. Once the console is turned on, you can use the arrow buttons to select a program, set up the console, or change the resistance level while exercising. Remember to refer to the user manual for more detailed instructions and information specific to the Horizon Fitness Paros 2.0 hometrainer.

Why is the LCD display not showing any data?

If the LCD display of the Horizon Fitness Paros 2.0 hometrainer is not showing any data, you can try the following steps to troubleshoot the issue: 1. Check for a thin protective sheet of clear plastic on the overlay of the console. This sheet should be removed before use. 2. Ensure that the machine is not in energy saver mode. The hometrainer automatically enters energy saver mode after being in stand-by mode for 15 minutes. Press any button on the console to wake it up. 3. Verify that the arrow buttons are functioning properly. Use the up and down arrow buttons to select programs, set up the console, or change resistance while exercising. 4. Press the start and stop button to turn on the console. This button is also used to pause the workout or resume exercising after a pause. Hold the button for 3 seconds to reset the console. 5. If the issue persists, try pressing the change display button to scroll through display modes and workout feedbacks. This button can switch between profile display mode for resistance or watt profile for the current workout watt. If these steps do not resolve the issue, refer to the user manual for further troubleshooting or contact customer support for assistance.

How can I disable the energy saver mode on the hometrainer?

To disable the energy saver mode on the Horizon Fitness Paros 2.0 hometrainer, follow these steps: 1. Press and hold the STOP button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to the Eng2 option and press Enter. 3. Use the Enter key to navigate to the P5 option, which is for switching on/off the energy saver function. 4. Press Enter to select the Energy Saver mode. 5. Use the arrow keys to choose between ENRGY SAVE ON or OFF. 6. To exit the engineering menu, press and hold the STOP button for 3-5 seconds. By following these steps, you can disable the energy saver mode on the Horizon Fitness Paros 2.0 hometrainer. Please note that the specific button names and navigation may vary slightly depending on the language and version of the console.

What should I do if the arrow buttons are not responding?

If the arrow buttons on the Horizon Fitness Paros 2.0 hometrainer are not responding, you can try the following steps to troubleshoot the issue: 1. Check for any obstructions or debris around the arrow buttons. Clean the area around the buttons to ensure they are not stuck or blocked. 2. Ensure that the console is properly connected to the hometrainer. Check the cable connections between the console and the main unit, and make sure they are securely plugged in. 3. Restart the hometrainer by turning it off and then on again. This can help reset the system and resolve any temporary issues. 4. If the issue persists, try performing a console reset. Refer to the user manual for instructions on how to reset the console. This may vary depending on the specific model of the hometrainer. 5. If none of the above steps resolve the issue, contact customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to refer to the user manual for more detailed instructions and information specific to the Horizon Fitness Paros 2.0 hometrainer.

Why is the start and stop button not working when I press it?

If the start and stop button on the Horizon Fitness Paros 2.0 hometrainer is not working when pressed, you can try the following steps to troubleshoot the issue: 1. Check for any obstructions or debris around the start and stop button. Clean the area around the button to ensure it is not stuck or blocked. 2. Ensure that the console is properly connected to the hometrainer. Check the cable connections between the console and the main unit, and make sure they are securely plugged in. 3. Restart the hometrainer by turning it off and then on again. This can help reset the system and resolve any temporary issues. 4. If the issue persists, try performing a console reset. Refer to the user manual for instructions on how to reset the console. This may vary depending on the specific model of the hometrainer. 5. If none of the above steps resolve the issue, contact customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to refer to the user manual for more detailed instructions and information specific to the Horizon Fitness Paros 2.0 hometrainer.

Is the manual of the Horizon Fitness Paros 2.0 available in English?

Yes, the manual of the Horizon Fitness Paros 2.0 is available in English .

Is your question not listed? Ask your question here

No results