Horizon Fitness Paragon CS III HRC manual

Horizon Fitness Paragon CS III HRC
6.3 · 1
PDF manual
 · 20 pages
English
manualHorizon Fitness Paragon CS III HRC

View the manual for the Horizon Fitness Paragon CS III HRC here, for free. This manual comes under the category hometrainers and has been rated by 1 people with an average of a 6.3. This manual is available in the following languages: English. Do you have a question about the Horizon Fitness Paragon CS III HRC or do you need help? Ask your question here

Need help?

Do you have a question about the Horizon Fitness and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandHorizon Fitness
ModelParagon CS III HRC
Producthometrainer
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Horizon Fitness Paragon CS III HRC below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I troubleshoot if the console and controls of the Horizon Fitness Paragon CS III HRC hometrainer are not responding?

To troubleshoot if the console and controls of the Horizon Fitness Paragon CS III HRC hometrainer are not responding, you can follow these steps: 1. Verify the power connection: Make sure the power cord is properly plugged into the outlet and that the treadmill switch is turned on. 2. Check the circuit breaker: If the treadmill circuit breaker trips during a workout, ensure that the treadmill is plugged into a dedicated 20amp circuit. Avoid using an extension cord. 3. Ensure proper power cord slack: If the treadmill shuts off when elevating, check that there is enough slack in the power cord to reach the wall outlet during elevation. 4. Verify level surface and belt tension: If the running belt does not stay centered during a workout, ensure that the treadmill is placed on a level surface. Also, check that the belt is properly tightened according to the instructions for centering the belt. 5. Eliminate interference sources: If the treadmill makes a clicking noise towards the front while walking or running, ensure that the treadmill is level and free from any sources of interference such as fluorescent lights, computers, or appliances with large motors. By following these troubleshooting steps, you should be able to resolve issues with the console and controls of the Horizon Fitness Paragon CS III HRC hometrainer.

What should I do if the hometrainer does not start or pause properly?

If the Horizon Fitness Paragon CS III HRC hometrainer does not start or pause properly, you can follow these steps: 1. Start the workout: Press the Start button on the console to begin exercising. 2. Pause the workout: To pause your workout, press the Stop button on the console. This will temporarily pause the treadmill. 3. Reset the treadmill: If the hometrainer is not responding or if there is a malfunction, you can try resetting it. Press and hold the Stop button on the console to reset the treadmill. By following these steps, you should be able to troubleshoot and resolve issues with starting or pausing the Horizon Fitness Paragon CS III HRC hometrainer.

How can I fix it if the display on the console of the hometrainer is not showing the correct information?

To fix the issue of the display on the console of the Horizon Fitness Paragon CS III HRC hometrainer not showing the correct information, you can try the following steps: 1. Check the display settings: Press the SELECT button on the console to view alternate information such as speed, pulse, laps, elevation, and calories. Make sure the display is set to show the desired information. 2. Reset the display: If the display is still not showing the correct information, you can try resetting it. Press and hold the SELECT button to reset the display. 3. Verify the input sources: Ensure that the input sources, such as the heart rate handlebars or other sensors, are properly connected and functioning. If the display relies on these input sources for certain information, make sure they are working correctly. 4. Calibrate the sensors: If the display is showing inaccurate readings for metrics like speed or distance, you may need to calibrate the sensors. Refer to the manual for instructions on how to calibrate the sensors specific to the Horizon Fitness Paragon CS III HRC hometrainer. By following these steps, you should be able to resolve the issue of the display not showing the correct information on the Horizon Fitness Paragon CS III HRC hometrainer.

What should I do if the elevation or speed settings on the hometrainer are not working properly?

To troubleshoot if the elevation or speed settings on the Horizon Fitness Paragon CS III HRC hometrainer are not working properly, you can follow these steps: 1. Check the program selection: Ensure that you have selected the desired program by pressing the + or - speed buttons or using the numbered quick speed keys. Press the SELECT button to confirm the program selection. 2. Verify the time selection: Make sure you have chosen the desired workout duration by pressing the + or - speed buttons or using the default time. Press the START button to begin the workout. 3. Adjust the difficulty level: If available for the selected program, you can change the difficulty level from 1 to 10 by pressing the + or - speed buttons. You can also use the numbered quick speed keys corresponding to the program level. Press the SELECT button to confirm the difficulty level. 4. Calibrate the speed and elevation: If the speed or elevation readings are inaccurate, you may need to calibrate the sensors. Refer to the manual for specific instructions on how to calibrate the speed and elevation settings for the Horizon Fitness Paragon CS III HRC hometrainer. By following these steps, you should be able to troubleshoot and resolve issues with the elevation or speed settings on the Horizon Fitness Paragon CS III HRC hometrainer.

How do I troubleshoot if the program profiles on the hometrainer are not functioning as expected?

To troubleshoot if the program profiles on the Horizon Fitness Paragon CS III HRC hometrainer are not functioning as expected, you can follow these steps: 1. Verify program selection: Ensure that you have selected the desired program profile from the available options. Use the + or - speed or incline keys to navigate through the program profiles and press the SELECT button to confirm your selection. 2. Check default time: Each program profile has a default time setting. If the program ends before the desired duration, you can adjust the time using the + or - speed or incline keys. Press the SELECT button to confirm the new time setting. 3. Monitor speed and elevation changes: Some program profiles involve changes in speed or elevation. Make sure that the speed and elevation adjustments are occurring as expected during the program. If not, check the program settings and ensure that the speed and elevation changes are properly programmed. 4. Calibrate the sensors: If the program profiles are not responding accurately to your inputs, you may need to calibrate the sensors. Refer to the manual for specific instructions on how to calibrate the sensors for the Horizon Fitness Paragon CS III HRC hometrainer. By following these steps, you should be able to troubleshoot and resolve issues with the program profiles on the Horizon Fitness Paragon CS III HRC hometrainer.

Is the manual of the Horizon Fitness Paragon CS III HRC available in English?

Yes, the manual of the Horizon Fitness Paragon CS III HRC is available in English .

Is your question not listed? Ask your question here

No results