View the manual for the Horizon Fitness Elite E5000 here, for free. This manual comes under the category hometrainers and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Horizon Fitness Elite E5000 or do you need help? Ask your question here
| Brand | Horizon Fitness |
| Model | Elite E5000 |
| Product | hometrainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Horizon Fitness Elite E5000 below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
If the Horizon Fitness Elite E5000 hometrainer is not turning on, you can follow these steps to troubleshoot the issue: 1. Check the outlet: Ensure that the outlet the machine is plugged into is functional. Double-check that the breaker has not tripped. 2. Verify the power cord: Make sure you are using the correct power cord provided by Customer Tech support. Ensure that the power cord is not pinched or damaged and is properly plugged into both the outlet and the machine. 3. Check the power switch: Ensure that the power switch is turned to the on position (may not apply to all models). 4. Inspect console connections: Turn off the machine and unplug the power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched. 5. Replace batteries (if applicable): If your console uses batteries, they may need to be replaced. If the console lights up but the Time/RPMs do not count, or if the resistance levels seem incorrect, you can try the following additional steps: 6. Reset the console: Turn off the machine and unplug the power cord. Remove the console and check that all connections are secure. Restart the machine and allow the resistance to reset to the default position. Retry the resistance levels. If the roller wheels are leaving particles on the guide rails or if the hometrainer makes a squeaking or chirping noise, you can try the following steps: 7. Clean the roller wheels and guide rails: Wipe off the roller wheels and guide rails with a damp cloth to remove any particles. 8. Ensure the hometrainer is on a level surface: Make sure the hometrainer is placed on a level surface to prevent any noise or performance issues. 9. Check and tighten bolts: Loosen all bolts attached during the assembly process, grease the threads, and tighten them again. 10. Apply grease: Apply a lithium-based grease to the top surface of the guide rails. By following these steps, you should be able to troubleshoot and resolve the issue of the Horizon Fitness Elite E5000 hometrainer not turning on.
To ensure that you are positioning your feet correctly on the Horizon Fitness Elite E5000 elliptical, follow these steps: 1. Place the elliptical on a level surface with clearance around it to ensure proper ventilation. 2. Make sure the elliptical is plugged into a power source and the power switch is in the "on" position. 3. Stand on the elliptical with your entire foot secured on the foot pad. 4. The elliptical offers a variety of foot positions. Moving your foot to the forwardmost position of the foot pad increases your step height, similar to a step machine. Placing your foot toward the back of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run. 5. You can pedal both forward and backward on the elliptical to target different leg muscle groups such as your hamstrings and calves. 6. When moving the elliptical, remove the power supply and firmly grasp the steel portion of the rear stabilizer bar. Tilt and roll the elliptical, making sure to grab the steel bar and not the plastic cover. 7. If necessary, level the elliptical by adjusting the adjustable levelers located on the bottom of the frame. Use a carpenter's level to ensure proper leveling. 8. If your elliptical model has an adjustable incline feature, you can adjust the incline using the buttons on the console or by manually lifting and guiding the adjustment bar. By following these steps, you can ensure that you are positioning your feet correctly on the Horizon Fitness Elite E5000 elliptical.
To start using the Horizon Fitness Elite E5000 hometrainer, follow these steps: 1. Find a level surface to place the hometrainer. Make sure there is enough clearance around it and avoid blocking any vent or air openings. 2. Ensure that the power supply is connected to the power jack located in the front of the machine near the stabilizer tube. Some models may have an on/off switch next to the power jack, so make sure it is in the on position. 3. Position your feet on the foot pads. The hometrainer offers a variety of foot positions. Placing your foot towards the forward most position of the foot pad increases your step height, similar to a step machine. Placing your foot towards the back of the foot pad decreases your step height, creating a more gliding feel like a smooth walk or run. Always ensure your entire foot is secured on the foot pad. 4. Start pedaling. The hometrainer allows you to pedal both forward and backward, offering a variation to your workout and targeting different leg muscle groups such as hamstrings and calves. By following these steps, you can begin using the Horizon Fitness Elite E5000 hometrainer and enjoy the benefits of regular exercise, such as weight loss, a healthier heart, improved muscle tone, and increased daily energy levels.
To troubleshoot if the Horizon Fitness Elite E5000 hometrainer is not turning on, follow these steps: 1. Check the outlet: Ensure that the outlet the machine is plugged into is functional. Double-check that the breaker has not tripped. 2. Verify the power cord: Make sure you are using the correct power cord provided by Customer Tech support. Ensure that the power cord is not pinched or damaged and is properly plugged into both the outlet and the machine. 3. Check the power switch: Ensure that the power switch is turned to the on position (may not apply to all models). 4. Inspect the console connections: Turn off the machine and unplug the power cord. Remove the console and check that all connections to the console are secure and not damaged or pinched. 5. Check the batteries: If your console uses batteries, they may need to be replaced. If the above steps do not resolve the issue, it is possible that the speed sensor and/or magnet may have become dislodged or damaged. In such cases, it is recommended to contact Customer Tech support for further assistance. Please note that these troubleshooting steps are specific to the Horizon Fitness Elite E5000 hometrainer.
To improve the foot positioning on the Horizon Fitness Elite E5000 hometrainer and make it feel more comfortable and stable, follow these steps: 1. Ensure that the hometrainer is placed on a level surface with sufficient clearance around it. Avoid placing it in areas that block vent or air openings. 2. Position your feet correctly on the foot pad. The elliptical offers a variety of foot positions. Moving your foot to the forwardmost position of the foot pad increases your step height, creating a feel similar to a step machine. Placing your foot toward the back of the foot pad decreases your step height and creates more of a gliding feel, similar to a smooth walk or run. Always make sure your entire foot is secured on the foot pad. 3. Experiment with different foot positions to find the one that feels most comfortable and stable for you. You can pedal both forward and backward to vary your workout and target different leg muscle groups. By following these steps, you can optimize the foot positioning on the Horizon Fitness Elite E5000 hometrainer for a more comfortable and stable exercise experience.
To troubleshoot if you are not experiencing the expected health benefits from using the Horizon Fitness Elite E5000 hometrainer, follow these steps: 1. Check your exercise environment for sources of interference such as fluorescent lights, computers, underground fencing, home security systems, or appliances containing large motors. These items may cause erratic heart rate readouts. 2. Make sure you are gripping the heart rate handlebars with moderate pressure. Gripping them too tight can lead to inaccurate readings. 3. Avoid constantly holding the heart rate handlebars while exercising, as constant movement and vibration can also affect the accuracy of the heart rate readouts. Only hold the grips long enough to monitor your heart rate. 4. Take into consideration that erratic heart rate readouts can occur when you are breathing heavily during a workout, when your hands are constricted by wearing a ring, or when your hands are dry or cold. Try to moisten your palms by rubbing them together to warm them. 5. If you have heavy arrhythmia, arteriosclerosis, peripheral circulation disorder, or especially thick skin on the measuring palm, the heart rate readings may not be accurate. If these troubleshooting steps do not resolve the issue, please discontinue use and contact customer technical support.
Yes, the manual of the Horizon Fitness Elite E5000 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Horizon Fitness and is the answer not in the manual?
Question and answer
Number of questions: 0