View the manual for the Horizon Fitness Comfort Ri here, for free. This manual comes under the category hometrainers and has been rated by 5 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Horizon Fitness Comfort Ri or do you need help? Ask your question here
| Brand | Horizon Fitness |
| Model | Comfort Ri |
| Product | hometrainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Horizon Fitness Comfort Ri below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To operate the Comfort 3 Console on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Make sure to remove the thin protective sheet of clear plastic on the overlay of the console before use. 2. The Comfort 3 Console features an LCD display with multiple windows. These windows show information such as time, distance, calories, speed, RPM, resistance level, heart rate, calories, watts, HR wheel, and workout profile. 3. To minimize energy consumption, the hometrainer will enter energy saver mode automatically after being in stand-by mode for 15 minutes. You can quickly wake up the machine by touching any button on the console. 4. Use the arrow buttons to navigate through the console options. These buttons allow you to select a program, set up your console, or change the resistance while exercising. 5. The enter button is used to confirm settings of workout programs or user profiles. 6. The start and stop button is used to begin exercising, pause your workout, or resume exercising after a pause. Holding this button for 3 seconds will reset the console. 7. The change display button is used to scroll through display modes and workout feedbacks. Pressing this button allows you to switch between profile display mode for resistance (upper bar displayed) or watt profile for your current workout watt (lower bar displayed). 8. If you want to listen to music during your workout, you can connect your cellphone or MP3 player to the console using the audio in jack. The integrated speaker will play your workout music. 9. The Comfort 3 Console also features a smart device and reading rack, which can hold your smartphone, tablet, or reading materials. By following these steps, you will be able to operate the Comfort 3 Console on the Horizon Fitness Comfort Ri hometrainer effectively.
If the LCD display windows on the Horizon Fitness Comfort Ri hometrainer are not showing the correct information, you can try the following steps: 1. Check if there is a thin protective sheet of clear plastic on the overlay of the console. This sheet should be removed before use. 2. Ensure that the hometrainer is not in energy saver mode. If it has been in stand-by mode for 15 minutes, it will enter energy saver mode automatically. To wake it up, simply touch any button on the console. 3. Use the arrow buttons on the console to navigate through the options. These buttons allow you to select a program, set up the console, or change the resistance while exercising. 4. Press the enter button to confirm the settings of the workout program or user profile. 5. If the display is not showing the correct information, try pressing and holding the start and stop button for 3 seconds to reset the console. 6. Use the change display button to scroll through different display modes and workout feedbacks. This button allows you to switch between profile display mode for resistance (upper bar displayed) or watt profile for your current workout watt (lower bar displayed). 7. If you want to listen to music during your workout, you can connect your cellphone or MP3 player to the console using the audio in jack. The integrated speaker will play your workout music. By following these steps, you should be able to troubleshoot and resolve any issues with the LCD display windows on the Horizon Fitness Comfort Ri hometrainer.
To activate the Energy Saver Mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Press and hold the STOP button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to Eng2 and press Enter. 3. Use the Enter key to navigate to P5, which is the Energy Saver mode setting. 4. Press ENTER to select Energy Saver mode. 5. Use the arrow keys to choose between ENRgY SAVE ON or OFF. 6. Press and hold the STOP button for 3-5 seconds to exit the engineering menu. By following these steps, you can activate or deactivate the Energy Saver Mode on the Horizon Fitness Comfort Ri hometrainer. This mode helps save energy by automatically entering standby mode after 15 minutes of inactivity. To wake up the console, simply touch any button.
If the console buttons on the Horizon Fitness Comfort Ri hometrainer are not responding, you can try the following steps: 1. Check if there is a thin protective sheet of clear plastic on the overlay of the console. This sheet should be removed before use. 2. Ensure that you are pressing the console buttons softly. The Comfort 7, 8i, and Ri consoles come with touch keys, and pressing too hard can affect the operation. 3. If the buttons are still not responding, try resetting the console. Press and hold the START AND STOP button for 3 seconds to reset the console. 4. Make sure that the hometrainer is properly connected to a power source. Check the power cord and ensure it is securely plugged into an outlet. 5. If the issue persists, check the console for any visible damage or loose connections. If you notice any issues, contact Horizon Fitness customer support for further assistance. By following these steps, you can troubleshoot and resolve the issue of unresponsive console buttons on the Horizon Fitness Comfort Ri hometrainer.
To switch between the Comfort Upright bike and Recumbent Bike modes on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Start by adjusting the seat position according to your preference. Use the seat height adjustment knob to raise or lower the seat to a comfortable level. 2. If you are using the Comfort 8i model, you can also make use of the accessory tray located on the console mast. 3. To switch to the Comfort Upright bike mode, position yourself on the seat with your feet on the pedals and your hands on the handlebars. This mode allows you to exercise in an upright position. 4. To switch to the Recumbent Bike mode, adjust the seat position by using the seat position adjustment knob. This mode allows you to exercise in a reclined position with your back supported by the seat. 5. Make sure to adjust the seat position and handlebars to ensure proper alignment and comfort in both modes. By following these steps, you can easily switch between the Comfort Upright bike and Recumbent Bike modes on the Horizon Fitness Comfort Ri hometrainer.
To adjust the seat on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Loosen the seat height adjustment knob by turning it two half turns counter-clockwise. 2. Pull the seat height adjustment knob outward while sliding the seat post tube into the main frame. 3. Position the seat at the desired height. 4. Tighten the seat nuts using a 13mm wrench. You may need an additional 13mm wrench to make the assembly easier. It is important to ensure that the seat is in the right position and that the front of the seat is tilted up for a more stable riding experience. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer. Always refer to the user manual for detailed instructions and illustrations.
The Horizon Fitness Comfort Ri hometrainer has an LCD display that shows various information such as time, distance, calories, speed, RPM, resistance level, heart rate, calories, watts, and workout profile. If the LCD display is not showing any information, you can try the following steps: 1. Check if the protective sheet of clear plastic on the overlay of the console has been removed. This sheet should be removed before use. 2. Make sure the hometrainer is not in energy saver mode. The machine automatically enters energy saver mode after being in stand-by mode for 15 minutes. To wake it up, simply touch any button on the console. 3. Ensure that the hometrainer is properly connected to a power source. Check if the power cord is securely plugged into an outlet. 4. If the above steps do not resolve the issue, try resetting the console. Press and hold the start and stop button for 3 seconds to reset the console. If the LCD display still does not show any information after following these steps, it is recommended to refer to the user manual or contact customer support for further assistance.
To activate the Energy Saver Mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Ensure that the hometrainer is plugged into a power source and turned on. 2. Wait for the console to enter stand-by mode. This occurs when there is no activity on the hometrainer for 15 minutes. 3. Once the console is in stand-by mode, the Energy Saver Mode will automatically activate to minimize energy consumption. 4. To wake up the hometrainer from Energy Saver Mode, simply touch any button on the console. The LCD display will turn on, and you can resume your workout. It is important to note that the Energy Saver Mode is designed to conserve energy when the hometrainer is not in use. This feature helps to prolong the battery life and reduce power consumption. Please refer to the user manual for more information on the Energy Saver Mode and other features of the Horizon Fitness Comfort Ri hometrainer.
If the console buttons on your Horizon Fitness Comfort Ri hometrainer are not responding, you can try the following steps: 1. Ensure that the hometrainer is properly connected to a power source and turned on. 2. Check if there is any debris or dirt on the console buttons. Clean the buttons gently using a soft cloth or cotton swab. 3. Make sure that your hands are clean and dry before using the console buttons. Moisture or sweat on your hands can affect the responsiveness of the buttons. 4. If the console buttons still do not respond, try resetting the console. Press and hold the start and stop button for 3 seconds to reset the console. 5. If the issue persists, check the battery level of the console. Replace the batteries if they are low or depleted. If none of these steps resolve the issue, it is recommended to contact customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary.
To change the display mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Locate the "Change Display" button on the console. It is labeled with the letter "f" on the diagram. 2. Press the "Change Display" button to scroll through the different display modes. Each press of the button will switch to the next display mode. 3. The display modes include time, distance, calories, speed, RPM, resistance level, heart rate, calories, watts, HR wheel, and workout profile. Keep pressing the button until you reach the desired display mode. 4. The upper bar of the display shows the resistance profile, while the lower bar shows the watt profile for your current workout. 5. Once you have selected the desired display mode, the LCD display will show the corresponding information during your workout. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer. Refer to the user manual for more detailed information and illustrations.
To adjust the seat on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Loosen the seat height adjustment knob by turning it two half turns counter-clockwise. 2. Pull the seat height adjustment knob outward while sliding the seat post tube into the main frame. 3. Position the seat at the desired height. 4. Tighten the seat nuts using a 13mm wrench. You may need an additional 13mm wrench to make the assembly easier. Make sure to tilt up the front of the seat for a more stable riding experience. It is important to ensure that the seat is in the correct position during assembly. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer.
To troubleshoot why the LCD display on your Horizon Fitness Comfort Ri hometrainer is not showing any information, follow these steps: 1. Check if the protective sheet of clear plastic on the overlay of the console has been removed. If not, peel off the protective sheet to ensure clear visibility of the LCD display. 2. Ensure that the hometrainer is properly connected to a power source. Check if the power cord is securely plugged into an outlet. 3. Verify that the hometrainer is turned on. Look for a power button or switch and make sure it is in the "on" position. 4. Check the batteries if your hometrainer has a battery-powered option. Replace the batteries if they are low or depleted. 5. If the above steps do not resolve the issue, there may be a problem with the LCD display itself. In this case, it is recommended to contact Horizon Fitness customer support for further assistance. Please note that these troubleshooting steps are specific to the Horizon Fitness Comfort Ri hometrainer.
To activate the Energy Saver Mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Press and hold the STOP button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to Eng2 and press Enter. 3. Use the Enter key to navigate to P5, which is the Energy Saver mode setting. 4. Press ENTER to select Energy Saver mode. 5. Use the arrow keys to choose between ENRgY SAVE ON or OFF. 6. Press and hold the STOP button for 3-5 seconds to exit the engineering menu. By activating the Energy Saver Mode, the hometrainer's display will automatically enter standby mode after 15 minutes of inactivity, saving energy by disabling most power to the machine. To wake up the display, simply press any key on the console. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer.
If the console buttons on your Horizon Fitness Comfort Ri hometrainer are not responding, you can try the following steps: 1. Ensure that the hometrainer is properly connected to a power source. Check if the power cord is securely plugged into an outlet. 2. Verify that the hometrainer is turned on. Look for a power button or switch and make sure it is in the "on" position. 3. Check if the console buttons are clean and free from any debris or obstructions. Use a soft, dry cloth to gently clean the buttons. 4. If the console buttons still do not respond, try resetting the console. Locate the reset button, usually located on the back or bottom of the console, and press it using a small, pointed object like a pen tip. 5. If none of the above steps resolve the issue, there may be a problem with the console itself. In this case, it is recommended to contact Horizon Fitness customer support for further assistance. Please note that these troubleshooting steps are specific to the Horizon Fitness Comfort Ri hometrainer.
To change the display mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Press and hold the CHANGE DISPLAY button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to Eng2 and press Enter. 3. Use the Enter key to navigate to P1, which is the display mode setting. 4. Use the arrow keys to switch between the available display modes. The options may include standard (British) or metric units. 5. Press and hold the STOP button for 3-5 seconds to exit the engineering menu. By following these steps, you can change the display mode on your Horizon Fitness Comfort Ri hometrainer to suit your preference. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer.
To adjust the seat on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Loosen the seat height adjustment knob by turning it two half turns counter-clockwise. 2. Pull the seat height adjustment knob outward while sliding the seat post tube into the main frame. 3. Position the seat at the desired height. 4. Tighten the seat nuts using a 13mm wrench. You may need an additional 13mm wrench to make the assembly easier. Make sure to tilt up the front of the seat for a more stable riding experience. It is important to ensure that the seat is in the correct position during assembly. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer. Refer to the manual for further details and illustrations if needed.
The Horizon Fitness Comfort Ri hometrainer has an LCD display that shows various information during your workout. If the LCD display is not showing any information, you can try the following steps: 1. Check if the machine is properly plugged into a power source. Ensure that the power cord is securely connected to the hometrainer and the power outlet. 2. Make sure that the console is turned on. Look for a power button or switch on the console and ensure it is in the "on" position. 3. Check the batteries if your hometrainer has a battery backup option. Replace the batteries if they are low or depleted. 4. Verify that the LCD display is not in sleep mode. Press any button on the console to wake up the display. 5. If none of the above steps resolve the issue, there may be a problem with the console or the LCD display itself. In this case, it is recommended to contact Horizon Fitness customer support for further assistance. Please note that these troubleshooting steps are specific to the Horizon Fitness Comfort Ri hometrainer.
To activate the Energy Saver Mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Press and hold the STOP button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to Eng2 and press Enter. 3. Use the Enter key to navigate to P5, which is the Energy Saver mode setting. 4. Press ENTER to select Energy Saver mode. 5. Use the arrow keys to choose between ENRgY SAVE ON or OFF. 6. Press and hold the STOP button for 3-5 seconds to exit the engineering menu. By activating the Energy Saver Mode, the hometrainer's display will automatically enter standby mode after 15 minutes of inactivity, saving energy by disabling most power to the machine. To wake up the display, simply press any key on the console. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer.
If the console buttons on your Horizon Fitness Comfort Ri hometrainer are not responding, you can try the following steps: 1. Ensure that the hometrainer is properly plugged into a power source and turned on. Check if the power cord is securely connected to the hometrainer and the power outlet. 2. Check if the console is displaying any error messages or warnings. If there are any error messages, refer to the manual for troubleshooting steps specific to the error message. 3. Clean the console buttons and the surrounding area. Use a soft, lint-free cloth slightly dampened with water to gently wipe the buttons and remove any dirt or debris that may be affecting their responsiveness. 4. Check the batteries if your hometrainer has a battery backup option. Replace the batteries if they are low or depleted. 5. If none of the above steps resolve the issue, there may be a problem with the console itself. In this case, it is recommended to contact Horizon Fitness customer support for further assistance. Please note that these troubleshooting steps are specific to the Horizon Fitness Comfort Ri hometrainer.
To change the display mode on the Horizon Fitness Comfort Ri hometrainer, follow these steps: 1. Press and hold the CHANGE DISPLAY button on the console for 3-5 seconds to enter the engineering menu. 2. Use the arrow keys to navigate to Eng2 and press Enter. 3. Use the Enter key to navigate to P1, which is the display mode setting. 4. Use the arrow keys to switch between the available display modes. The options may include standard (British) or metric units. 5. Press and hold the STOP button for 3-5 seconds to exit the engineering menu. By following these steps, you can change the display mode on your Horizon Fitness Comfort Ri hometrainer to suit your preference. Please note that these instructions are specific to the Horizon Fitness Comfort Ri hometrainer.
Yes, the manual of the Horizon Fitness Comfort Ri is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Horizon Fitness and is the answer not in the manual?
Question and answer
Number of questions: 0