View the manual for the Horizon Fitness Comfort 7i here, for free. This manual comes under the category hometrainers and has been rated by 3 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Horizon Fitness Comfort 7i or do you need help? Ask your question here
| Brand | Horizon Fitness |
| Model | Comfort 7i |
| Product | hometrainer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Horizon Fitness Comfort 7i below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
To adjust the seat height on the Horizon Fitness Comfort 7i hometrainer, follow these steps: 1. Sit on the seat and position the ball of your foot on the center of the pedal. 2. Your knee should bend slightly at the furthest pedal position. 3. Get off the bike seat and locate the seat adjustment knob. 4. Turn the adjustment knob counter-clockwise two half turns to loosen it. 5. Pull out the knob to unlock the seat post. 6. Adjust the seat post up or down to the desired height. 7. Release the knob to lock the seat post in place. 8. Turn the knob clockwise until it is tightened. 9. Before each use, make sure the seat post is securely locked in place. 10. Sit on the seat and check if the height is comfortable for pedaling without locking your knees or shifting your weight from side to side. By following these steps, you can easily adjust the seat height on the Horizon Fitness Comfort 7i hometrainer to ensure a comfortable and proper riding position.
The resistance level on the Horizon Fitness Comfort 7i hometrainer may not be changing due to the following reasons: 1. Incorrect Power Cord: Ensure that you are using the correct power cord provided or authorized by your local dealer. 2. Reset Console: Try resetting the console to allow the resistance to reset to the default position. Restart the hometrainer and retry adjusting the resistance levels. If the above steps do not resolve the issue, it is recommended to contact your local dealer for further assistance. They may ask detailed questions about the symptoms and provide the necessary service or replacement parts to resolve the problem. Please note that troubleshooting steps may vary depending on the specific issue and it is always advisable to consult the manufacturer or authorized service center for accurate guidance.
To properly set up the Horizon Fitness Comfort 7i hometrainer for your height and body type, follow these steps: 1. Location: Place the hometrainer on a level surface with 3 feet of clearance behind, on each side, and one foot in front for the power cord. Avoid placing it in areas that block vents or air openings, and keep it away from garages, covered patios, water, or outdoor environments. 2. Seat Positioning: Sit on the seat and position the ball of your foot on the center of the pedal. Your knee should bend slightly at the furthest pedal position. Adjust the seat height to ensure comfortable pedaling without locking your knees or shifting your weight from side to side. 3. Upright Bikes - Seat Adjustment: Loosen the adjustment knob by turning it two half turns counter-clockwise. Pull out the knob to unlock the seat post and adjust it up or down to the desired setting. Release the knob to lock the seat post in place and tighten it clockwise. 4. Recumbent Bikes - Seat Adjustment: Slide the seat to a position that keeps a slight bend in your knee while your legs are in the extended position. Lock the mechanism by rotating the handle down until it tightens. 5. Recumbent Bikes - Mesh Seat Back Adjustment: Some models have a tilting mesh seat back. Adjust the tilt angle by rotating the lever down (counter-clockwise) and lean back on the mesh seat until the desired position is achieved. Rotate the lever upward (clockwise) until it is snug to lock the position. 6. Moving the Hometrainer: Use the transport wheels built into the front stabilizer tube to move the hometrainer. Firmly grasp the steel portion of the rear stabilizer tube for recumbent bikes or the handlebars for upright bikes, carefully lift, and roll on the transport wheels. 7. Leveling the Hometrainer: Place the hometrainer where you intend to use it and adjust the rear levelers to make it level on the floor. Then, adjust the third leveler located under the base frame tube to make it snug with the floor. Lock the levelers in place by tightening the nuts against the frame. By following these steps, you can properly set up the Horizon Fitness Comfort 7i hometrainer for your height and body type, ensuring a comfortable and effective workout experience.
The display screen on the Horizon Fitness Comfort 7i hometrainer may not be showing any data when you start pedaling due to the following reasons: 1. Power Connection: Ensure that the hometrainer is properly connected to a functional power outlet using the correct power cord provided or authorized by your local dealer. 2. Console Connections: Check that all connections between the console and the hometrainer are secure and not damaged or pinched. Unplug the power cord, remove the console, and inspect the connections before reattaching it. 3. Console Reset: Try resetting the console by unplugging the power cord, waiting for a few seconds, and then plugging it back in. This may help to resolve any temporary issues with the display screen. If the above steps do not resolve the issue, it is recommended to contact your local dealer for further assistance. They may ask detailed questions about the symptoms and provide the necessary service or replacement parts to resolve the problem. Please note that troubleshooting steps may vary depending on the specific issue, and it is always advisable to consult the manufacturer or authorized service center for accurate guidance.
To ensure a smooth and quiet operation of the Horizon Fitness Comfort 7i hometrainer, follow these steps: 1. Level Surface: Place the hometrainer on a level surface to prevent any wobbling or uneven movement during your workout. 2. Proper Assembly: Ensure that all bolts and screws are securely tightened during the assembly process. Loose components can cause unnecessary noise and vibrations. 3. Lubrication: Regularly lubricate the moving parts of the hometrainer, such as the pedals, flywheel, and resistance mechanism, as recommended in the maintenance section of the manual. This helps reduce friction and noise. 4. Belt Tension: Check the tension of the drive belt. If it is too loose, it may cause slippage and noise. Refer to the manual for instructions on how to adjust the belt tension properly. 5. Regular Maintenance: Clean the hometrainer regularly to remove any dust or debris that may accumulate on the moving parts. This helps maintain smooth operation and reduces noise. 6. Proper Use: Ensure that you are using the hometrainer correctly, following the recommended guidelines for resistance levels, pedaling technique, and workout intensity. Improper use can lead to excessive noise and wear on the machine. By following these steps, you can ensure a smooth and quiet operation of the Horizon Fitness Comfort 7i hometrainer, enhancing your workout experience.
Yes, the manual of the Horizon Fitness Comfort 7i is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Horizon Fitness and is the answer not in the manual?
Question and answer
Number of questions: 0