Hori Split Pad Pro Nintendo Switch

Hori Split Pad Pro Nintendo Switch manual

(1)
  • Thank you for purchasing this product.
    Before using this product please read the instructions carefully.
    After reading the instruction manual, please keep it for reference.
    Instruction manual
    Controller:  × 1 Instruction manual:  × 1
    Nintendo Switch / PC(Xinput)
    Platform
    ● Keep this product out of the reach of children under 3.
    ● Keep this product away from small children.
      Seek medical advice immediately if it is swallowed.
    ● Please be careful and not allow children to wrap
      the cord around their neck.
    ● Keep the controller away from dusty or humid areas.
    ● Do not use this product if damage or alteration occurs.
    ● Do not get the product wet or leave it where it can get wet.
      It may cause an electric shock or defect.
    ● Do not leave the product around a heater, audio amp, etc.
      Do not leave it under direct sunlight It may cause a defect.
    ● Do not touch the metal parts of the USB plug with your
      finger or other metal material. It may cause injury or defect.
    ● Do not apply strong impact or weight on the product.
    ● Do not pull roughly or bend the cable of the controller.
    ● Never disassemble, repair or modify this product.
    ● If product needs cleaning, use only a soft dry cloth.
      Do not use any chemical agents like benzine or thinner.
    ● Do not use this product for anything other than its
      intended purpose.
      We are not responsible for any accidents or damages
      in the event of use other than the intended purpose.
    Caution
    Included
    Windows
    ®
    10
    8
    8.1
    7
    Supported OS
    USB Port, Internet ConnectionSystem requirements
    Important
    This product is not a wireless controller.
    Please be aware that unexpected action may occur if the Turbo function is used in the HOME Menu.
    Connect it to the Nintendo Switch Dock USB port.
    Do not connect to anything other than a USB port. It may cause a defect.
    Please insert the USB connector of the controller into the USB port of
    the Nintendo Switch
    TM
    Dock.
    Layout
    How to connect
    TURBO LED
    USB Connector
    ZR Button
    Left Stick
    {
    Left Stick Button (Hold)
    }
    Control Pad
    Capture Button
    TURBO Button
    HOME Button
    Controller cable
    Right Stick
    {
    Right Stick Button (Hold)
    }
    B Button
    A Button
    X Button
    Y Button
    -
    Button
    + Button
    L Button ZL Button R Button
    Nintendo Switch
    TURBO LED
    USB Connector
    RB Button
    Left Stick
    {
    Left Stick Button (Hold)
    }
    Control Pad
    There is no function
    TURBO Button
    GUIDE Button
    Controller cable
    Right Stick
    {
    Right Stick Button (Hold)
    }
    B Button
    A Button
    X Button
    Y Button
    BACK Button
    START Button
    LT Button LB Button
    RT Button
    PC
    Switch button functions between L/R and ZL/ZR buttons.
    Press and hold the ZL and ZR buttons simultaneously and connect the USB connector to
    the Nintendo Switch Dock USB port.
    Settings will be saved even after you unplug the controller or turn off the power.
    To reset the button settings, repeat the "How to switch" process.
    Turning ON the Nintendo Switch while simultaneously pressing the ZL/ZR buttons with the USB connected will switch the button settings.
    How to switch
    The Turbo hold function allows continuous rapid ire without having to hold the button.
    (Pressing the assigned button deactivates this).
    * Control Pad (UP, DOWN, LEFT or RIGHT) are not compatible with the Turbo hold mode,
    and can only be set to Turbo mode.
    The following buttons can be set to Turbo or Turbo hold mode:
    A Button / B Button / X Button / Y Button / L Button / R Button / ZL Button / ZR Button /
    Control Pad (UP / DOWN / LEFT / RIGHT)
    How to use the Turbo Functions
    L/R to ZL/ZR Toggle Function
    L Button
    ZL Button
    R Button
    ZR Button
    Connect it to the Nintendo Switch Dock USB port.
    +
    TURBO LED will turn off.
    TURBO LED (RED) will turn on.
    Main Features
    You can adjust the Turbo mode to 3 different speeds.
    While pressing the Turbo Button, push up on the Right Analog Stick
    to change the Turbo speed in the following order :
    5 times/second → 10 times/second → 20 times/second
    While pressing the Turbo Button, push down on the Right Analog Stick
    to change the Turbo speed in the following order :
    20 times/second → 10 times/second → 5 times/second
    How to change Turbo Speed
    +
    +
    ■ External dimensions : (width) 103mm × (depth) 141mm × (height) 69mm
    ■ Cable length : (Overall length) Approximately 3 m■ Weight : About 230g
    ■ Rating : 5V 45mA
     This product is not a wireless controller.
     This product is not equipped with vibration function.
     The image on the packaging may differ from the actual product.
     The manufacturer reserves the right to change the product design or speciications without notice.
     Nintendo Switch logo, Nintendo Switch are trademarks of Nintendo.
     HORI & HORI logo are registered trademarks of HORI.
    Please read the Nintendo Switch instructions carefully before you use this product
    with the Nintendo Switch console.
    Make sure that your Nintendo SwitchTM is updated with the latest system software.
    L Button
    ZL Button
    R Button
    ZR Button
    +
    TURBO Button
    +
    TURBO Button
    Turbo OFF
    * The Turbo LED will flash at a rate corresponding to the Turbo speed. The Turbo LED will flash as long as one of the button is in Turbo mode.
    * By pressing the HOME Button, all Turbo function and Turbo hold settings will be deactivated.
    When restarting game play, you will need to set the Turbo function again.
    * Turbo Function may not be compatible with all software titles. Please try adjusting the Turbo settings or simply turn OFF TURBO.
    * Turbo function will deactivate when you unplug the USB connector.
    Turbo LED StatusSetting method
    Turbo Mode
    OFF
    (All buttons)
    Hold down the Turbo button and
    then press the button that you
    want to set to Turbo mode.
    +
    TURBO Button
    Turbo Hold
    Press the button once more,
    and the button will remain
    inTurbo (Turbo Hold).
    Pressing the button again
    once more will deactivate
    the Turbo function.
    Hold the TURBO Button and
    press the SELECT Button.
    OFF
    OFF
    Button OFF
    TURBO LED will lash.
    Green or Orange
    Button ON
    TURBO LED will turn on.
    Green or Orange
    Button OFF
    TURBO LED will turn on.
    Green or Orange
    Button ON
    TURBO LED will lash.
    Green or Orange
    +
    TURBO Button
    -
    Button
    In the case that after deactivating the turbo
    function, the turbo Indicator LED does not
    turn off, this means that there is still a button
    set to Turbo/Turbo Hold.
    ※ LED will turn red while L/R and ZL/ZR button
      functions are switched.
    If you forget which buttons you have set to
    Turbo mode, deactivate them all and reassign,
    as you require.
    ※ LED will turn red while L/R and ZL/ZR button
      functions are switched.
    * Turbo speed is set to 10 times/second by default.
    * Right Stick must be returned to the neutral position before changing to the next turbo speed.
    * The Turbo LED will lash at a rate corresponding to the Turbo speed for 2 seconds.
    Target age : 6 years and over
Hori Split Pad Pro Nintendo Switch

Need help?

Number of questions: 0

Do you have a question about the Hori Split Pad Pro Nintendo Switch or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Hori Split Pad Pro Nintendo Switch owners to properly answer your question.

View the manual for the Hori Split Pad Pro Nintendo Switch here, for free. This manual comes under the category Controllers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: Engels. Do you have a question about the Hori Split Pad Pro Nintendo Switch or do you need help? Ask your question here

Hori Split Pad Pro Nintendo Switch specifications

General
Brand Hori
Model Split Pad Pro Nintendo Switch
Product Controller
Language Engels
Filetype PDF
Input device
Device type Gamepad
Gaming platforms supported Nintendo Switch
Gaming control technology -
Gaming control function buttons D-pad,Turbo button
Programmable buttons
Analog thumbsticks
Weight & dimensions
Weight 80 g
Width 65 mm
Depth 28 mm
Height 110 mm
Ports & interfaces
Device interface Bluetooth
Connectivity technology Wireless
Packaging data
Package type Box
Ergonomics
Product colour Black,Red
Housing material Plastic
Ergonomic grip
Ergonomic triggers
Plug and Play
Power
Power source Battery
Packaging content
Manual

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Hori Split Pad Pro Nintendo Switch.

Is your question not listed? Ask your question here

Manua.ls

Looking for a manual? Manua.ls ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free.

Manua.ls

© Copyright 2021 Manua.ls. All Rights Reserved.

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

Read more