View the manual for the Hoover WindTunnel 2 High Capacity here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 5.6. This manual is available in the following languages: English. Do you have a question about the Hoover WindTunnel 2 High Capacity or do you need help? Ask your question here
The Hoover WindTunnel 2 High Capacity is a vacuum cleaner designed for efficient and effective cleaning on various surfaces. Its lightweight and compact design make it easy to maneuver and store. Equipped with Hoover's patented WindTunnel 2 Technology, this vacuum cleaner creates a powerful suction that lifts and removes embedded dirt and debris from carpets and hard floors. The multi-cyclonic action ensures consistent suction power and prevents clogging, allowing for uninterrupted cleaning. The high capacity dirt cup eliminates the need for frequent emptying, providing longer cleaning sessions. Additionally, the rinseable filter captures allergens and particles as small as 0.3 microns, improving indoor air quality. With a 30-foot power cord, the Hoover WindTunnel 2 High Capacity provides an extended reach, reducing the need to unplug and reposition frequently. The 8-foot stretch hose and telescoping extension wand allow for easy cleaning of stairs, upholstery, and other hard-to-reach areas. The vacuum cleaner is also equipped with a brushroll on/off switch, enabling seamless transitions between carpeted and hard floors. The height adjustment feature adapts to different floor types, ensuring effective cleaning performance. In conclusion, the Hoover WindTunnel 2 High Capacity is a reliable and durable vacuum cleaner that offers efficient cleaning on multiple surfaces. Its powerful suction, large dirt cup capacity, and versatile features make it a suitable choice for tackling various cleaning tasks.
| Brand | Hoover |
| Model | WindTunnel 2 High Capacity |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover WindTunnel 2 High Capacity below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
Please check if the brush roll is obstructed or tangled with hair. This can affect the suction power of the vacuum cleaner.
To clean the filters, gently tap them against a hard surface to remove any loose debris. If the filters are excessively dirty or damaged, they can be replaced with new ones for optimal performance.
If the vacuum overheats, make sure to turn it off and unplug it from the power source. Check if the filters and air pathways are free from clogs. Allow the vacuum to cool down for at least 30 minutes before resuming use.
The height adjustment feature is located near the brush roll. You can typically find a dial or lever that allows you to raise or lower the cleaning head, ensuring efficient cleaning on various floor types.
Regularly inspect the brush roll for any obstructions or tangled hair. Use a pair of scissors or a knife to carefully remove any debris. It is also recommended to clean the brush roll using mild soap and water periodically to remove dirt buildup.
Yes, the manual of the Hoover WindTunnel 2 High Capacity is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 7how do i remove the back panel to replace the on/off switch? I've removed all the screws I can find, but something is holding the panel in place. Can you help me determine what I'm missing?
My Hoover high performance wind tunnel quit working today. It has no power to it. I checked and it was clogged up so after I got it unclothed i plugged it back in and it still would not come on. Does it have a reset button on it or do I need to take it in for repair?
Does the brush bar on the xl pet wind tunnel spin when running cleaner and if so where does it turn on
How do you get the handle to fold down on your vacuum cleaner
How do I see Assemble the dust collector after emptying
how change belt
How to clean the filter