View the manual for the Hoover TS 2308 011 here, for free. This manual comes under the category vacuum cleaners and has been rated by 2 people with an average of a 9.9. This manual is available in the following languages: English. Do you have a question about the Hoover TS 2308 011 or do you need help? Ask your question here


| Brand | Hoover |
| Model | TS 2308 011 | TS2308 011 |
| Product | vacuum cleaner |
| EAN | 8016361825062 |
| Language | English |
| Filetype | User manual (PDF) |
| Suction power | 420 AW |
| Maximum input power | 2300 W |
| Annual energy consumption | - kWh |
| Vacuum air filtering | Micro |
| Proper use | Home |
| Noise level | 77 dB |
| Operating radius | 1.5 m |
| Vacuum | 35 kPa |
| Cleaning surfaces | Carpet, Hard floor |
| - | |
| - | |
| - | |
| Dirt separating method | Filtering |
| Dust container type | - |
| Dust capacity | 1.5 L |
| Type | Cylinder vacuum |
| Cordless | No |
| Cleaning type | - |
| Extension tubes | Yes |
| Flexible hose | Yes |
| Product color | Black |
| Tube material | Metal |
| Dust container full indicator | Yes |
| On/off switch | Yes |
| Width | 427 mm |
| Depth | 260 mm |
| Height | 326 mm |
| Weight | 5800 g |
| Package weight | 9600 g |
| Package dimensions (WxDxH) | 590 x 330 x 330 mm |
| Dimensions (WxDxH) | 427 x 260 x 326 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover TS 2308 011 below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover TS 2308 011 has a weight of 5800 g.
The Hoover TS 2308 011 has a height of 326 mm.
The Hoover TS 2308 011 has a width of 427 mm.
The Hoover TS 2308 011 has a depth of 260 mm.
Yes, the Hoover TS 2308 011 does have a dust container full indicator. This feature is convenient for users as it lets them know when the dust container needs to be emptied, ensuring optimal performance.
The suction power of the Hoover TS 2308 011 is 420 AW. This is a high suction power, making it suitable for effectively cleaning various surfaces and picking up dirt and debris.
No, the Hoover TS 2308 011 is not cordless. This means that it needs to be plugged into a power source while in use. While it may limit mobility slightly, it ensures consistent and uninterrupted power for longer cleaning sessions.
The dust capacity of the Hoover TS 2308 011 is 1.5 L. This is a decent capacity, allowing for multiple cleaning sessions before the dust container needs to be emptied. It is suitable for general household use.
The operating radius of the Hoover TS 2308 011 is 1.5 m. This means that users can clean a relatively large area without having to constantly change power outlets. It offers convenience and ease of movement during cleaning.
To remove a blockage from the Hoover TS 2308 011 vacuum cleaner, follow these steps: 1. Check if the bag check indicator is illuminated. If yes, it may indicate a blockage. Proceed to the next step. 2. Turn off the vacuum cleaner and unplug it from the power supply for safety. 3. Use a rod or a pole to remove any blockage from the tubes and flexible hose. Gently insert the rod or pole into the tubes or hose and push it through to dislodge the blockage. 4. If there is a blockage in the flexible hose, you can try lightly squeezing or bending it to remove the obstruction. 5. Clean the underside of the carpet and hard floor nozzle frequently using the crevice tool. This will help prevent blockages and maintain optimal performance. By following these steps, you should be able to effectively remove any blockages from the Hoover TS 2308 011 vacuum cleaner and restore its suction power. Remember to always ensure the vacuum cleaner is turned off and unplugged before attempting any maintenance or troubleshooting.
To troubleshoot if the Hoover TS 2308 011 vacuum cleaner is not picking up dirt properly, follow these steps: 1. Check if the bag check indicator is illuminated. If yes, it may indicate a full bag. Refer to the manual for instructions on replacing the bag or emptying the permanent bag. 2. Ensure that the filters are not blocked. Wash the filters under hand warm water, without scrubbing them. Remove excess water with a dry cloth and let them air dry for 24 hours or until fully dry. Return the filters to their original positions in the cleaner. 3. If the bag is not full and the filters are not blocked, check for any other blockages in the system. Use a rod or a pole to remove any blockage from the tubes and flexible hose. You can also lightly squeeze or bend the flexible hose to remove any obstructions. 4. Clean the underside of the carpet and hard floor nozzle frequently using the crevice tool. This will help prevent blockages and maintain optimal performance. By following these steps, you should be able to address the issue of the Hoover TS 2308 011 vacuum cleaner not picking up dirt properly. Remember to always ensure the vacuum cleaner is turned off and unplugged before attempting any maintenance or troubleshooting.
To maintain optimal performance of the Hoover TS 2308 011 vacuum cleaner, it is recommended to empty the bag or replace the filters after filling 5 bags. Here are the steps to follow: 1. Check the bag check indicator on the vacuum cleaner. If it is illuminated or flashing, it may indicate a full bag. Refer to the manual for instructions on replacing the bag or emptying the permanent bag. 2. To access the filters, refer to the diagrams provided in the manual (B1, 2, 3, O1). Rinse both filters under hand warm water without scrubbing them. Remove excess water with a dry cloth and let them air dry for 24 hours or until fully dry. 3. After completing the washing operations, return the filters to their original positions in the cleaner. By following these steps and maintaining a regular schedule of emptying the bag or replacing the filters after 5 full bags, you can ensure optimal performance and efficiency of the Hoover TS 2308 011 vacuum cleaner.
If the Hoover TS 2308 011 vacuum cleaner is not turning on, there are several things you can check: 1. Check the power supply: Ensure that the vacuum cleaner is properly plugged into a functioning power outlet. Check if there is power in the outlet by plugging in another device. 2. Check the bag or dust container: If the bag or dust container is full, it may prevent the vacuum cleaner from turning on. Refer to the manual for instructions on how to empty the bag or clean the dust container. 3. Check for blockages: A blockage in the tubes or hose can also prevent the vacuum cleaner from turning on. Inspect the tubes and hose for any obstructions and remove them if necessary. 4. Check the filters: Dirty or clogged filters can affect the performance of the vacuum cleaner. Refer to the manual for instructions on how to clean or replace the filters. 5. Check the thermal protection: If the vacuum cleaner has overheated, it may have automatically shut off. Unplug the vacuum cleaner and let it cool down for about 30 minutes. Check for any blockages and remove them before attempting to turn on the vacuum cleaner again. By checking these potential issues, you should be able to troubleshoot and resolve the problem of the Hoover TS 2308 011 vacuum cleaner not turning on.
Yes, you can use accessories such as turbo nozzles or carese nozzles with the Hoover TS 2308 011 vacuum cleaner. To use these accessories, follow these steps: 1. Fit the extension tubes (E1), floor nozzle (E2), or other accessories as required for your cleaning needs. 2. Once the accessories are attached, your Hoover TS 2308 011 vacuum cleaner is ready for use. 3. To start the cleaner, press the ON/OFF button (F). This will activate the vacuum cleaner and allow you to begin cleaning. Press the button again to stop the cleaner before removing the plug after use. 4. If you need to wind the power cord back into the cleaner, you can use the cord rewind button (G). Make sure to remove the plug from the power supply before using this feature. By following these steps, you can effectively use accessories such as turbo nozzles or carese nozzles with the Hoover TS 2308 011 vacuum cleaner to enhance your cleaning experience.
Yes, the manual of the Hoover TS 2308 011 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 1Staubbeutel einlegen