View the manual for the Hoover T-Series WindTunnel here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Hoover T-Series WindTunnel or do you need help? Ask your question here
The Hoover T-Series WindTunnel is a vacuum cleaner that is designed to effectively clean various surfaces in your home. It features a WindTunnel technology that creates powerful suction, allowing it to capture deep-down dirt and debris from carpets and rugs. This vacuum cleaner is equipped with a 5-position height adjustment feature, which allows you to easily adjust the brush roll to different carpet heights for optimum cleaning performance. Additionally, it has a brush roll shut-off pedal, giving you the option to switch between carpet and hard floors without scattering dirt and debris. The Hoover T-Series WindTunnel features a HEPA media filter that traps 99.97% of dust and pollen, ensuring improved indoor air quality. Its 8-foot stretch hose and 25-foot power cord provide extended reach, allowing you to clean large areas of your home without constantly unplugging the vacuum. This vacuum cleaner also comes with various attachments, including a crevice tool, dusting brush, and upholstery/dusting brush, which enable you to clean hard-to-reach areas and delicate surfaces with ease. The Hoover T-Series WindTunnel is designed with a durable construction and offers reliable performance over time. It is specifically designed to provide efficient and thorough cleaning, making it a practical choice for any household.
| Brand | Hoover |
| Model | T-Series WindTunnel |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover T-Series WindTunnel below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
To troubleshoot if your Hoover T-Series WindTunnel vacuum cleaner is not picking up dirt effectively, follow these steps: 1. Check if the rinsable filter and/or filter made with HEPA media is dirty. Clean them as instructed on pages 9 and 10 of the manual. 2. Ensure the dirt cup is not full or clogged. Empty the dirt cup as explained on page 9. 3. Inspect the belt for any damage and replace it if broken (refer to page 12). 4. Check for clogs in the brushroll and hose. Clear any blockages following the instructions on page 11. 5. Verify that the carpet height setting is correct for the type of carpet being cleaned (page 7). 6. Make sure the Suction Only Mode is turned off by stepping on the Brushroll ON/OFF Pedal (page 6).
1. Check if the vacuum cleaner's power cord is firmly plugged into the outlet. 2. Inspect for a blown fuse or tripped breaker in your home and replace/reset if necessary. 3. If the vacuum cleaner has a thermal protector activated, unplug it and allow it to cool for 30 minutes to reset the thermal protector. 4. Clean the rinsable filter and HEPA media filter if they are dirty. 5. Empty the dirt cup if it is full or clogged. 6. Check for a broken or worn belt and replace it if needed. 7. Ensure that the brushroll and hose are not clogged. 8. Adjust the carpet height setting to the appropriate level for the carpet being cleaned. 9. Turn off the Suction Only Mode if it is activated. 10. If the issue persists, contact an authorized service representative for further assistance.
To address a situation where the Hoover T-Series WindTunnel vacuum cleaner's suction power seems reduced, follow these steps: 1. Check if the rinsable filter and/or HEPA media filter are dirty. Clean them as instructed on pages 9 and 10 of the manual. 2. Ensure the dirt cup is not full or clogged. Empty the dirt cup as shown on page 9. 3. Inspect the belt for any damage. If broken or worn, replace it following the instructions on page 12. 4. Check for clogs in the brushroll and hose. Clear any obstructions by referring to page 11. 5. Verify the carpet height setting is correct for the carpet being cleaned. Adjust it accordingly as explained on page 7. 6. Turn off the Suction Only Mode by stepping on the Brushroll ON/OFF Pedal as detailed on page 6.
Yes, the manual of the Hoover T-Series WindTunnel is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 2How do you use the hose part it's not sucking
Sucking in reverse