View the manual for the Hoover SteamJet here, for free. This manual comes under the category vacuum cleaners and has been rated by 7 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Hoover SteamJet or do you need help? Ask your question here

| Brand | Hoover |
| Model | SteamJet | SSNB1700 |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Type | Steam mop |
| Capacity | 0.7 L |
| Cord length | 7 m |
| Product color | Black, Red, Silver |
| Power | - W |
| Width | 245 mm |
| Depth | 165 mm |
| Height | 1040 mm |
| Weight | 3200 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover SteamJet below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover SteamJet has a weight of 3200 g.
The Hoover SteamJet has a height of 1040 mm.
The Hoover SteamJet has a width of 245 mm.
The Hoover SteamJet has a depth of 165 mm.
Before assembling the Hoover SteamJet, first ensure that it is unplugged from the power source. Begin by attaching the handle to the main body of the vacuum cleaner, ensuring it is securely fastened. Then, connect the extension tube to the handle, making sure it clicks into place. Finally, attach the desired nozzle or accessory to the extension tube, ensuring a proper fit.
To fill the water tank of the Hoover SteamJet, remove it from the vacuum cleaner body by unlatching the tank release lever. Next, open the tank's cap and fill it with clean water. It is recommended to fill the tank up to the maximum water level indicator, which is typically marked clearly on the tank.
The Hoover SteamJet offers various cleaning modes to cater to different surfaces and cleaning needs. To switch between modes, locate the mode selection dial or button on the vacuum cleaner, usually located near the handle. Turn the dial or press the button to select the desired mode, such as vacuuming, steam cleaning, or both simultaneously.
After steam cleaning with the Hoover SteamJet, it is important to empty the dirty water tank to maintain optimal performance. Start by unplugging the vacuum cleaner and ensuring it is powered off. Locate the tank release lever and remove the tank from the body. Then, carefully pour out the contents of the dirty water tank into a sink or drain, being cautious not to spill. Reattach the empty tank securely before resuming operation.
Properly cleaning and maintaining the filter of the Hoover SteamJet is essential for its efficiency. To clean the filter, first, unplug the vacuum cleaner and ensure it is turned off. Access the filter by removing the filter cover or locating its housing. Rinse the filter gently under running water to remove dirt and debris. Allow the filter to air dry completely before reattaching it to the vacuum cleaner. Regularly cleaning and replacing the filter as per the manufacturer's instructions will ensure optimal performance.
Yes, the Hoover SteamJet is a steam mop. This means that it uses steam to clean and sanitize floors, providing a deep and thorough clean.
The capacity of the Hoover SteamJet is 0.7 liters. This is a decent size for a steam mop, allowing for longer cleaning sessions without frequent refills.
Yes, the manual of the Hoover SteamJet is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 0