Hoover Smart R1 T4012 manual

Hoover Smart R1 T4012
7.5 · 1
PDF manual
 · 8 pages
English
manualHoover Smart R1 T4012
2
Congratulations on your purchase of your new vacuum cleaner. There are
many useful features built into your cleaner and we recommend that you carefully read
this instruction book so that you may take best advantage of them.
BEFORE YOU BEGIN
This product must be operated in accordance with these instructions and used only for
domestic cleaning to remove DRY dirt and dust from household carpets, ooring and
fabrics.
This cleaner is intended for domestic household use only and is not designed for the
collection of vitreous building material including particle board construction products
and similar products such as wood/ bres, sand, cement, llers, bre glass etc. The pickup
of these materials may be harmful to your cleaner and will void the manufacturers
warranty.
Safety reminders and taking care of your cleaner.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY.
This will ensure you obtain full bene t from your new cleaner. Keep this Instruction Book
in a handy place for future reference.
IMPORTANT
Always switch the cleaner off and remove the plug from the electricity supply before
cleaning your appliance, when not in use, or attempting any maintenance task. The
cleaner must only be connected to an AC supply at the voltage shown on the rating
plate. This cleaner should only be used for its intended purpose as described in these
instructions. Never operate the vacuum cleaner without lters.
DO NOT pick up hard or sharp objects, matches, hot ashes, cigarette ends or
similar items.
DO NOT pick up ammable liquids such as cleaning uids, petrol etc., or use in the
presence of such vapors.
DO NOT use your cleaner out of doors or on any wet surface or for WET pick-up.
DO NOT run over the power cable with the Power Brush.
Young children should be supervised to ensure that they do not play with the appliance.
Close attention is necessary when used near children.
* This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
If using an extension cord please make sure that it is of an approved type and that it is
fully extended. Failure to do so could cause your cleaner to overheat and damage it.

View the manual for the Hoover Smart R1 T4012 here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Hoover Smart R1 T4012 or do you need help? Ask your question here

Need help?

Do you have a question about the Hoover and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
T
TASNEEM BHATTI October 29, 2022

PROBLEM IN ELECTRIC CONNECTION IN SIDE (SMOKE). PLS GIVE ME INFORMATION FOR OPEN ABOVE AREA FOR CHECKING POWER CONNECTION IN SIDE VACUUM.

PROBLEM IN ELECTRIC CONNECTION IN SIDE (SMOKE). PLS GIVE ME INFORMATION FOR OPEN ABOVE AREA FOR CHECKING POWER CONNECTION IN ...
zoom-in
View photo
J
JeanJanuary 2, 2024

I have a bagless model.. Opened to empty dust out, cannot close the lid again when the dust catcher is reinserted. Is there a release knob I cannot see.

S
Stephen DraperFebruary 22, 2024

Does the Hoover Smart R1 have a safety cutout switch if it overheats. The vacuum had a very dirty filter and cutout, everything has been cleaned but it will not start.

D
deanMarch 19, 2024

does smart r1 have a cut out switch if over heats or bag full

The Hoover Smart R1 T4012 is a vacuum cleaner designed for efficient and effective cleaning. This vacuum cleaner is equipped with advanced features to provide a thorough cleaning experience. The device has a compact design, making it easy to maneuver and store. The Smart R1 T4012 is equipped with a powerful motor that creates strong suction power, drawing in dirt and debris from various surfaces. The vacuum cleaner also has a high-capacity dust bin, minimizing the need for frequent emptying. Featuring a multi-stage filtration system, the Smart R1 T4012 effectively captures and traps dust particles and allergens, ensuring cleaner air quality. With its various attachments, this vacuum cleaner can be used on different surfaces, such as carpets, hardwood floors, and upholstery. The device also includes an adjustable height feature, allowing users to customize the vacuum's settings based on their cleaning requirements. The Hoover Smart R1 T4012 is designed with user convenience in mind. It has an ergonomic handle that provides a comfortable grip during use. The vacuum cleaner also features a long power cord, offering a wide cleaning radius without the need to continuously switch power outlets. Additionally, the device has a lightweight construction, making it easy to carry and transport throughout the home. In conclusion, the Hoover Smart R1 T4012 is a reliable and efficient vacuum cleaner that offers a convenient cleaning experience. With its powerful suction, multi-stage filtration, and versatile attachments, it is a suitable choice for various cleaning tasks.

General
BrandHoover
ModelSmart R1 T4012
Productvacuum cleaner
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover Smart R1 T4012 below.

My Hoover vacuum is losing suction. Why is that?

Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged

How often should I check the filter?

A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.

What do I do with a smelly vacuum cleaner?

A commonly used method is to put a little washing powder in the dust container or the dust bag.

How often should I vacuum my house?

For allergy sufferers, vacuuming the house at least twice a week is recommended.

What should I do if my Hoover Smart R1 T4012 vacuum cleaner appears to be faulty?

If your Hoover Smart R1 T4012 vacuum cleaner appears to be faulty, follow these steps: 1. Stop using the appliance: If you notice any signs of malfunction or if the supply cord is damaged, immediately stop using the vacuum cleaner to avoid any safety hazards. 2. Return to the point of purchase: If you are unable to rectify the fault on your own, return the cleaner to the point of purchase. They will be able to assist you further or arrange for repairs if necessary. 3. Consult the troubleshooting guide: If your vacuum cleaner fails to operate properly, refer to the troubleshooting guide in the manual. It provides solutions for common issues that you may encounter. 4. Contact an authorized service agent: If the problem persists or if you are unable to resolve the issue using the troubleshooting guide, get in touch with an authorized service agent. They have the expertise to diagnose and repair any faults with your vacuum cleaner. Remember to always switch off the cleaner and remove the plug from the electricity supply before attempting any repairs or maintenance tasks.

How should I handle a damaged supply cord on my Hoover Smart R1 T4012 vacuum cleaner?

To handle a damaged supply cord on your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Stop using the appliance: If you notice that the supply cord is damaged, immediately stop using the vacuum cleaner to avoid any safety hazards. 2. Disconnect from the power source: Switch off the cleaner and unplug it from the electricity supply. 3. Assess the damage: Inspect the supply cord to determine the extent of the damage. If the cord is frayed, cut, or has exposed wires, it is important not to use the vacuum cleaner until the cord is repaired or replaced. 4. Contact an authorized service agent: To ensure the safety and proper functioning of your vacuum cleaner, contact an authorized service agent. They will be able to provide guidance on how to proceed with repairing or replacing the damaged supply cord. Remember, it is crucial to prioritize safety and avoid using the vacuum cleaner with a damaged supply cord, as it can pose a risk of electric shock or other accidents.

What important information should I know before using my Hoover Smart R1 T4012 vacuum cleaner?

Before using your Hoover Smart R1 T4012 vacuum cleaner, it is important to know the following information: 1. Read the instruction manual: Take the time to carefully read the instruction manual provided with your vacuum cleaner. It contains important information on how to operate and maintain the cleaner effectively. 2. Domestic use only: The vacuum cleaner is designed for domestic household use only. It should be used to remove dry dirt and dust from household carpets, flooring, and fabrics. Avoid using it for collecting vitreous building materials or other harmful substances that may damage the cleaner and void the warranty. 3. Safety precautions: Always switch off the cleaner and unplug it from the electricity supply before cleaning, when not in use, or when performing maintenance tasks. Never operate the vacuum cleaner without filters. Do not pick up hard or sharp objects, flammable liquids, or use the cleaner outdoors or on wet surfaces. Avoid running over the power cable with the power brush. 4. Supervise children: Ensure that young children are supervised when the vacuum cleaner is in use to prevent accidents. The appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given proper supervision or instruction. 5. Approved extension cord: If using an extension cord, make sure it is of an approved type and fully extended to prevent overheating and damage to the cleaner. By following these important guidelines, you can safely and effectively use your Hoover Smart R1 T4012 vacuum cleaner for your cleaning needs.

How can I ensure the safety of my Hoover Smart R1 T4012 vacuum cleaner?

To ensure the safety of your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Read the instruction manual: Familiarize yourself with the information provided in the instruction manual. It contains important safety guidelines specific to your vacuum cleaner model. 2. Use as intended: Only use the vacuum cleaner for its intended purpose, which is to clean dry dirt and dust from household carpets, flooring, and fabrics. Avoid using it for collecting vitreous building materials or other harmful substances. 3. Switch off and unplug: Always switch off the cleaner and unplug it from the electricity supply before cleaning, when not in use, or when performing maintenance tasks. 4. Handle with care: Avoid pulling or yanking the power cord, as this can damage the cord or the cleaner. When moving the cleaner, hold it by the handle and avoid dragging it by the cord. 5. Keep away from water: Do not use the vacuum cleaner on wet surfaces or in wet conditions. Keep it away from water sources to prevent electrical shock or damage to the appliance. 6. Regular maintenance: Follow the recommended maintenance procedures outlined in the manual, such as cleaning or replacing filters, emptying the dust container, and checking for any signs of damage. By following these safety measures, you can ensure the safe and proper use of your Hoover Smart R1 T4012 vacuum cleaner.

What precautions should I take to protect my Hoover Smart R1 T4012 vacuum cleaner?

To protect your Hoover Smart R1 T4012 vacuum cleaner, follow these precautions: 1. Avoid picking up hard or sharp objects: Do not use the vacuum cleaner to pick up objects such as coins, paper clips, or small toys. These items can damage the cleaner's internal components or block the airflow. 2. Keep away from flammable liquids: Do not use the vacuum cleaner to pick up flammable liquids or materials. This can pose a fire hazard and damage the cleaner. 3. Use on appropriate surfaces: Use the vacuum cleaner only on dry surfaces and avoid using it on wet or damp areas. Moisture can damage the electrical components and pose a safety risk. 4. Store properly: When not in use, store the vacuum cleaner in a dry and safe place. Avoid storing it in areas with extreme temperatures or high humidity. 5. Handle the power cord carefully: Avoid pulling or yanking the power cord when using or storing the vacuum cleaner. This helps prevent damage to the cord and ensures safe operation. 6. Regular maintenance: Follow the recommended maintenance procedures outlined in the manual, such as cleaning or replacing filters, emptying the dust container, and checking for any signs of damage. By taking these precautions, you can protect your Hoover Smart R1 T4012 vacuum cleaner and ensure its longevity and safe operation.

How can I properly switch off my Hoover Smart R1 T4012 vacuum cleaner?

To properly switch off your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Release the power button: If your vacuum cleaner has a power button, release it by pressing it once. This will turn off the cleaner. 2. Unplug from the power source: After switching off the cleaner, unplug it from the electricity supply by gently pulling the plug out of the socket. 3. Store the power cord: Once the cleaner is switched off and unplugged, carefully wind the power cord around the cord hooks or cord storage area provided on the cleaner. This helps keep the cord organized and prevents it from getting tangled or damaged. 4. Store the cleaner: After properly winding the power cord, store the vacuum cleaner in a safe and dry place. Make sure it is stored in an upright position to prevent any damage to the cleaner or its components. By following these steps, you can ensure that your Hoover Smart R1 T4012 vacuum cleaner is properly switched off and safely stored after use.

What should I do if I accidentally pick up hard or sharp objects with my Hoover Smart R1 T4012 vacuum cleaner?

If you accidentally pick up hard or sharp objects with your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Switch off the cleaner: Immediately switch off the vacuum cleaner to prevent any further damage or injury. 2. Unplug from the power source: Unplug the cleaner from the electricity supply to ensure safety while handling the object. 3. Remove the object: Carefully remove the hard or sharp object from the cleaner. Use gloves or other protective equipment if necessary to avoid injury. 4. Inspect for damage: After removing the object, inspect the cleaner for any damage. Check the brush roll, nozzle, and other parts for any signs of wear or breakage. 5. Clean the cleaner: If there are any debris or residue left from the object, clean the cleaner thoroughly. Remove the dust container or bag and empty it. Wipe down the interior and exterior surfaces with a damp cloth. 6. Resume use: Once you have removed the object and ensured that the cleaner is in good condition, you can resume using it for regular cleaning tasks. By following these steps, you can address the situation if you accidentally pick up hard or sharp objects with your Hoover Smart R1 T4012 vacuum cleaner and ensure the continued safe and effective operation of the appliance.

Can I use my Hoover Smart R1 T4012 vacuum cleaner outdoors or on wet surfaces?

No, you should not use your Hoover Smart R1 T4012 vacuum cleaner outdoors or on wet surfaces. Follow these steps to ensure proper usage: 1. Indoor use only: The Hoover Smart R1 T4012 vacuum cleaner is designed for indoor use only. It is not suitable for outdoor use. 2. Dry surfaces only: Use the vacuum cleaner on dry surfaces such as carpets, flooring, and fabrics. Avoid using it on wet or damp areas to prevent damage to the appliance and potential electrical hazards. 3. Avoid moisture exposure: Keep the vacuum cleaner away from water sources and avoid using it in areas where there is a risk of water splashing or spills. Moisture can damage the electrical components and pose a safety risk. 4. Store in a dry place: When not in use, store the vacuum cleaner in a dry and safe place. Avoid storing it in areas with high humidity or where it may be exposed to moisture. By following these guidelines, you can ensure the safe and proper use of your Hoover Smart R1 T4012 vacuum cleaner and prevent any potential damage or accidents.

How should I take care of my Hoover Smart R1 T4012 vacuum cleaner?

To take care of your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Regular cleaning: Empty the dust container or replace the dust bag regularly to maintain optimal performance. Clean the filters as recommended in the manual to prevent clogging and ensure efficient suction. 2. Brush roll maintenance: Check the brush roll regularly for any tangled hair, threads, or debris. Remove any obstructions to prevent damage and maintain effective cleaning. 3. Power cord care: Avoid pulling or yanking the power cord when using or storing the vacuum cleaner. Gently unwind and rewind the cord to prevent damage. 4. Storage: Store the vacuum cleaner in a dry and safe place when not in use. Keep it away from extreme temperatures and humidity to prevent damage. 5. Maintenance checks: Periodically inspect the vacuum cleaner for any signs of wear or damage. Check the hoses, attachments, and other components for cracks or blockages. 6. Authorized service: If you encounter any issues or require maintenance beyond regular care, contact an authorized service center for assistance. They have the expertise to address any problems and ensure proper functioning. By following these care steps, you can prolong the lifespan of your Hoover Smart R1 T4012 vacuum cleaner and maintain its performance for efficient cleaning.

What are the important instructions for using my Hoover Smart R1 T4012 vacuum cleaner?

To ensure the safe and proper use of your Hoover Smart R1 T4012 vacuum cleaner, please follow these important instructions: 1. Read the instruction manual: Carefully read the instruction manual provided with your vacuum cleaner. It contains essential information on operating and maintaining the cleaner effectively. 2. Domestic use only: The vacuum cleaner is intended for domestic household use only. Use it to remove dry dirt and dust from household carpets, flooring, and fabrics. 3. Avoid harmful materials: Do not use the cleaner to collect vitreous building materials or similar substances such as wood fibers, sand, cement, or fillers. Using the cleaner for these materials may harm the appliance and void the warranty. 4. Safety reminders: Always switch off the cleaner and remove the plug from the electricity supply before cleaning, when not in use, or when performing maintenance tasks. Never operate the vacuum cleaner without filters. 5. Avoid picking up certain items: Do not pick up hard or sharp objects, matches, hot ashes, cigarette ends, or similar items. Also, avoid picking up flammable liquids or using the cleaner in the presence of such vapors. 6. Use indoors and on dry surfaces: Use the vacuum cleaner indoors and only on dry surfaces. Do not use it outdoors or on wet surfaces. 7. Power cable care: Avoid running over the power cable with the power brush to prevent damage. 8. Supervise children: Ensure that young children are supervised when the vacuum cleaner is in use. Pay close attention when using it near children. 9. Extension cord usage: If using an extension cord, ensure it is of an approved type and fully extended to prevent overheating. By following these important instructions, you can safely and effectively use your Hoover Smart R1 T4012 vacuum cleaner for your cleaning needs.

How can I protect the environment while using my Hoover Smart R1 T4012 vacuum cleaner?

To protect the environment while using your Hoover Smart R1 T4012 vacuum cleaner, follow these steps: 1. Proper disposal of packaging: When you unpack the vacuum cleaner, do not throw the packaging into household waste. Instead, take it to an appropriate recycling point to ensure proper disposal. 2. Use for intended purpose only: Use the vacuum cleaner for its intended purpose, which is to remove dry dirt and dust from household carpets, flooring, and fabrics. Avoid using it for collecting vitreous building materials or other harmful substances that may damage the cleaner and harm the environment. 3. Regular maintenance: Follow the recommended maintenance procedures outlined in the manual. This includes cleaning or replacing filters and emptying the dust container. Proper maintenance ensures optimal performance and reduces the need for replacement parts, contributing to environmental sustainability. By following these steps, you can minimize the environmental impact of using your Hoover Smart R1 T4012 vacuum cleaner and contribute to a greener and cleaner environment.

What should I do with the packaging of my Hoover Smart R1 T4012 vacuum cleaner?

When it comes to the packaging of your Hoover Smart R1 T4012 vacuum cleaner, follow these steps for proper disposal: 1. Recycling: Instead of throwing the packaging into household waste, take it to an appropriate recycling point. Recycling helps reduce waste and promotes environmental sustainability. 2. Separate materials: If the packaging consists of different materials, such as cardboard and plastic, separate them before recycling. This ensures that each material can be recycled properly. 3. Check local recycling guidelines: Different areas may have specific recycling guidelines, so it's a good idea to check with your local recycling facility or municipality for any specific instructions or requirements. 4. Reuse or repurpose: If possible, consider reusing or repurposing the packaging. For example, cardboard boxes can be used for storage or as organizers, while plastic packaging can be repurposed for various household needs. By following these steps, you can responsibly dispose of the packaging of your Hoover Smart R1 T4012 vacuum cleaner and contribute to reducing waste and promoting environmental conservation.

Is the manual of the Hoover Smart R1 T4012 available in English?

Yes, the manual of the Hoover Smart R1 T4012 is available in English .

Is your question not listed? Ask your question here

No results