View the manual for the Hoover H-FREE 500 HF522STH 011 here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Hoover H-FREE 500 HF522STH 011 or do you need help? Ask your question here






| Brand | Hoover |
| Model | H-FREE 500 HF522STH 011 | 39400989 |
| Product | vacuum cleaner |
| EAN | 8059019049953 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Dust container type | Bagless |
| Product color | Grey, Titanium |
| Dirt capacity dry | 0.45 L |
| Dust container type | Bagless |
| Product color | Grey, Titanium |
| Dust capacity | 0.45 L |
| Removable handheld vacuum | Yes |
| Wall mountable | Yes |
| Product type | Stick vacuum |
| Number of speeds | 2 |
| Dirt separating method | Cyclonic |
| Vacuum air filtering | Micro |
| Turbo | Yes |
| Suitable for all types of surface | Yes |
| Variable power | Yes |
| Cleaning type | Dry |
| Number of speeds | 2 |
| Dirt separating method | Cyclonic |
| Vacuum air filtering | Micro |
| Turbo | Yes |
| Suitable for all types of surface | Yes |
| Cleaning type | Dry |
| Display type | LED |
| Number of power levels | 2 |
| Built-in LED lighting | Yes |
| Battery technology | Lithium-Ion (Li-Ion) |
| Runtime | 45 min |
| Initial charging time | 12 h |
| Charging time | 2.5 h |
| Power source | Battery |
| Battery voltage | 22 V |
| Maximum input power | 290 W |
| Number of batteries supported | 6 |
| Battery technology | Lithium-Ion (Li-Ion) |
| Runtime | 45 min |
| Charging time | 2.5 h |
| Power source | Battery |
| Battery voltage | 22 V |
| Battery low indication | Yes |
| Maximum input power | 290 W |
| Number of batteries supported | 6 |
| Recharge indicator | Yes |
| Vertical storage | Yes |
| Easy to empty container | Yes |
| Brush quick release system | Yes |
| Easy driving system | Yes |
| Soft grip | Yes |
| Washable filter | Yes |
| Battery low indication | Yes |
| LED indicators | Status |
| Vertical storage | Yes |
| Easy to empty container | Yes |
| Easy driving system | Yes |
| Soft grip | Yes |
| Variable power | Yes |
| Washable filter | Yes |
| LED indicators | Status |
| Dust container full indicator | No |
| Battery level indicator | Yes |
| Battery level indicator | Yes |
| Brand-specific features | Finger tip controls |
| Pet hair remover | No |
| Crevice tool | Yes |
| Upholstery nozzle included | No |
| Special nozzle | 2in1 dusting and furniture nozzle |
| Vacuum brushes included | Turbo brush |
| Number of batteries included | 1 pc(s) |
| Crevice tool | Yes |
| Upholstery nozzle included | Yes |
| Number of batteries included | 1 pc(s) |
| Special nozzle | Sì |
| Vacuum brushes included | Turbo brush |
| Height | 1079 mm |
| Width | 252 mm |
| Depth | 195 mm |
| Weight (without accessories) | 2200 g |
| Weight | 2200 g |
| Height | 1079 mm |
| Width | 252 mm |
| Depth | 195 mm |
| Weight | 2200 g |
| Weight (without accessories) | 2200 g |
| Package height | 102 mm |
| Package width | 658 mm |
| Package depth | 368 mm |
| Package weight | 4400 g |
| Package height | 368 mm |
| Package width | 658 mm |
| Package depth | 368 mm |
| Package weight | 4400 g |
| Dust capacity | 0.45 L |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover H-FREE 500 HF522STH 011 below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover H-FREE 500 HF522STH 011 has a weight of 2200 g.
The Hoover H-FREE 500 HF522STH 011 has a height of 1079 mm.
The Hoover H-FREE 500 HF522STH 011 has a width of 252 mm.
The Hoover H-FREE 500 HF522STH 011 has a depth of 195 mm.
Yes, the Hoover H-FREE 500 HF522STH 011 is a bagless vacuum cleaner. This means that the user does not have to worry about purchasing or replacing vacuum bags, making it a convenient and cost-effective choice.
The Hoover H-FREE 500 HF522STH 011 has two speeds. This allows the user to adjust the suction power according to their cleaning needs, providing flexibility and efficiency.
The Hoover H-FREE 500 HF522STH 011 has a runtime of 45 minutes. This is considered a relatively long battery life, allowing the user to clean large areas without the need for frequent charging.
The Hoover H-FREE 500 HF522STH 011 requires 12 hours for initial charging and 2.5 hours for subsequent charges. Although the initial charging time is longer, the subsequent charging time is relatively quick, ensuring minimal downtime for the user.
Yes, the Hoover H-FREE 500 HF522STH 011 is equipped with both a recharge indicator and a battery level indicator. This allows the user to easily monitor the remaining battery life, ensuring uninterrupted cleaning sessions and preventing unexpected interruptions.
To replace the brushbar on the Hoover H-FREE 500 HF522STH 011 vacuum cleaner, follow these steps: 1. Make sure the cleaner is switched off before changing and cleaning the brushbar. 2. Remove the nozzle from the tube by pressing the nozzle release button and pulling it away from the main body. 3. Move the slider on the nozzle to the right to open the nozzle window. 4. Fully open the nozzle window to remove the hybrid brushbar. 5. Hold the brushbar release end cap and remove the brushbar from the nozzle. 6. If there is any remaining dirt on the brushbar, remove it manually or with the help of the cleaning tool. 7. Check for any dirt inside the nozzle or around the comb and remove it using the brush of the cleaning tool. 8. To ensure the nozzle is fully clear of any obstructions, turn it over and check along the bottom area. Clean this area using the hook of the cleaning tool if necessary. 9. Turn the nozzle to the initial position and re-fit the brushbar. The brushbar can only fit in one direction, so make sure it is properly aligned and press the end slightly to secure it in place. 10. Close the nozzle window by pressing the middle area until you hear it "click" into place. Check that the window is completely locked by pressing on both sides. By following these steps, you will be able to replace the brushbar on your Hoover H-FREE 500 HF522STH 011 vacuum cleaner.
The reduced suction power of your Hoover H-FREE 500 HF522STH 011 vacuum cleaner can be caused by several factors. Here are some possible reasons and troubleshooting steps: 1. Clogged Filters: Check if the pre-motor filter is dirty or clogged. Remove the filter and clean it according to the instructions in the manual. 2. Blockages in the Nozzle or Tube: Inspect the nozzle and tube for any blockages or obstructions. Use a cleaning tool or brush to remove any debris that may be causing the reduced suction. 3. Full Dust Cup: If the dust cup is full, it can affect the suction power. Empty the dust cup and ensure it is properly attached before using the vacuum cleaner. 4. Brushbar Issues: Check if the brushbar is tangled with hair or fibers. Remove any debris from the brushbar and ensure it spins freely. If the brushbar is damaged or not functioning properly, it may need to be replaced. 5. Battery Level: If the battery level is low, it can affect the suction power. Make sure the battery is fully charged before using the vacuum cleaner. By following these troubleshooting steps, you should be able to identify and resolve the issue of reduced suction power on your Hoover H-FREE 500 HF522STH 011 vacuum cleaner.
To attach the nozzle and tube to the Hoover H-FREE 500 HF522STH 011 vacuum cleaner, follow these steps: 1. Pick up the nozzle and tube. 2. Assemble one end of the tube into the nozzle neck until you hear it 'click' into place. 3. Pick up the handheld unit and assemble it onto the tube until you hear it 'click' into place. 4. Ensure that the nozzle and tube are securely attached before using the vacuum cleaner. By following these steps, you will be able to properly attach the nozzle and tube to your Hoover H-FREE 500 HF522STH 011 vacuum cleaner.
If your Hoover H-FREE 500 HF522STH 011 vacuum cleaner is not charging, you can try the following steps to troubleshoot the issue: 1. Check the Power Connection: Ensure that the charger is properly plugged into a suitable socket outlet and connected to the vacuum cleaner. Make sure there are no loose connections or damaged cables. 2. Verify the Power Supply: Check that the supply voltage is the same as stated on the charger. If the voltage is not compatible, the vacuum cleaner may not charge properly. 3. Charge with the Appliance Switched Off: Before charging, switch off the vacuum cleaner to allow it to charge more efficiently. 4. Monitor the Charging Process: When the vacuum cleaner is connected to the charger, the battery pack LED light should illuminate red during charging. Once fully charged, the LED light will turn white. If the LED light does not change or there is no indication of charging, there may be an issue with the charger or battery. 5. Contact Hoover Customer Centre: If the above steps do not resolve the charging issue, it is recommended to contact the Hoover Customer Centre for further assistance and potential repairs. By following these troubleshooting steps, you can address the issue of your Hoover H-FREE 500 HF522STH 011 vacuum cleaner not charging.
To ensure optimal performance of your Hoover H-FREE 500 HF522STH 011 vacuum cleaner, it is recommended to clean the filters regularly. Here are the steps to follow: 1. Pre-Motor Filter: The pre-motor filter should be cleaned approximately every month or when visibly dirty. To clean the pre-motor filter, remove it from the vacuum cleaner and tap it gently to remove any loose dirt. Rinse the filter under running water until the water runs clear. Allow the filter to air dry completely before reinserting it into the vacuum cleaner. 2. Single Cyclone Vortex Finder: The single cyclone vortex finder should be cleaned approximately every month or when necessary. Remove the vortex finder from the dust cup and rinse it under running water. Ensure that all dirt and debris are removed. Allow the vortex finder to air dry completely before reattaching it to the dust cup. By following these steps and cleaning the filters regularly, you can maintain the performance and efficiency of your Hoover H-FREE 500 HF522STH 011 vacuum cleaner.
Yes, the manual of the Hoover H-FREE 500 HF522STH 011 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 1How do the brushes rotate