View the manual for the Hoover Capture TCP 2010 here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.4. This manual is available in the following languages: English. Do you have a question about the Hoover Capture TCP 2010 or do you need help? Ask your question here

The Hoover Capture TCP 2010 is a cylinder vacuum cleaner designed for home use. With a maximum input power of 2000 W, it boasts a suction power of 300 AW, making it capable of effectively cleaning various surfaces. The vacuum cleaner offers variable power control, allowing users to adjust the suction intensity according to their cleaning needs. Its power control is mechanical, providing reliable and consistent performance. Featuring a dust bag as its dust container type, the Hoover Capture TCP 2010 efficiently collects dirt and debris during cleaning. This dry cleaning vacuum cleaner is not cordless and operates with a telescopic tube type, providing flexibility and easy maneuverability while cleaning. With an operating radius of 8 meters, this vacuum cleaner allows users to cover a substantial area without having to change power sockets frequently. However, it is important to note that the noise level of this model is 80 dB, which may be considered relatively high. Designed with practicality in mind, the Hoover Capture TCP 2010 is suitable for household cleaning tasks. Its performance and features make it a reliable option for those looking for a vacuum cleaner that can effectively clean various surfaces in a home environment.
| Brand | Hoover |
| Model | Capture TCP 2010 | TCP 2010 |
| Product | vacuum cleaner |
| EAN | 8016361834026 |
| Language | English |
| Filetype | User manual (PDF) |
| Suction power | 300 AW |
| Maximum input power | 2000 W |
| Variable power | Yes |
| Power control | Mechanical |
| Annual energy consumption | - kWh |
| Type | Cylinder vacuum |
| Dust container type | Dust bag |
| Tube material | - |
| Product color | Black, Red |
| Cordless | No |
| Tube type | Telescopic |
| Dust capacity | - L |
| Cleaning type | Dry |
| Proper use | Home |
| Noise level | 80 dB |
| Operating radius | 8 m |
| Vacuum air filtering | Micro |
| Cleaning surfaces | Carpet, Hard floor |
| - | |
| - | |
| - | |
| Dirt separating method | Filtering |
| Automatic cord rewinder | Yes |
| Cord length | 5 m |
| Cord storage | Yes |
| Weight | - g |
| Manual | Yes |
| Vacuum brushes included | Parquet brush |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover Capture TCP 2010 below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover Capture TCP 2010 has a weight of - g.
The suction power of the Hoover Capture TCP 2010 is 300 AW. This means that it has a strong suction capability, making it effective in cleaning up dirt and debris.
Yes, the Hoover Capture TCP 2010 has variable power control. This feature allows users to adjust the suction power according to their needs, making it versatile for different cleaning tasks.
No, the Hoover Capture TCP 2010 is not cordless. This means that it needs to be plugged into a power source during operation, limiting its mobility compared to cordless vacuum cleaners.
The noise level of the Hoover Capture TCP 2010 is 80 dB. This is considered average in terms of noise level for vacuum cleaners. It may be a bit loud for some users, but it is within acceptable range for most household cleaning.
Yes, the Hoover Capture TCP 2010 has an automatic cord rewinder. This feature makes it convenient for users as they can easily retract the cord with just a push of a button, saving time and effort.
To troubleshoot if the Hoover Capture TCP 2010 vacuum cleaner does not turn on, follow these steps: 1. Check the electricity supply: Ensure that there is a working electricity supply to the cleaner. You can do this by plugging in another electrical appliance to verify if the power outlet is functioning properly. 2. Inspect the dust bag: Check if the dust bag is over-filled. If it is, empty or replace the dust bag according to the instructions provided in the manual. 3. Examine the filter: Verify if the filter is blocked. If it is, clean or replace the filter as per the instructions in the manual. 4. Check for blockages: Inspect the hose or nozzle for any blockages. If there is a blockage, refer to the manual's instructions on removing blockages from the system. 5. Reset the cleaner: If the cleaner has overheated, it may automatically reset after approximately 30 minutes. Allow the cleaner to cool down and try turning it on again. If following these troubleshooting steps does not resolve the issue, it is recommended to contact your local Hoover service office for further assistance.
To improve the effectiveness of the Hoover Capture TCP 2010 vacuum cleaner in picking up dirt, follow these steps: 1. Check the dust bag: Ensure that the dust bag is not overfilled. If it is, empty or replace the dust bag according to the instructions provided in the manual. 2. Clean or replace the filter: Inspect the filter and clean or replace it as necessary. Refer to the manual for instructions on cleaning or replacing the filter. 3. Check for blockages: Examine the hose and nozzle for any blockages. If there is a blockage, remove it carefully using a rod or pole as instructed in the manual. 4. Adjust the suction power: Make sure that the suction power is set to an appropriate level for the surface you are cleaning. Adjust the suction regulator according to the instructions in the manual. 5. Clean the brush roll: Check the brush roll for any tangled hair, threads, or debris. Remove any obstructions and clean the brush roll thoroughly. By following these steps, you should be able to improve the dirt-picking efficiency of the Hoover Capture TCP 2010 vacuum cleaner. If the issue persists, it is recommended to contact your local Hoover service office for further assistance.
To troubleshoot if the Hoover Capture TCP 2010 vacuum cleaner is overheating during use, follow these steps: 1. Check for blockages: Inspect the hose and nozzle for any blockages that may be restricting airflow. Remove any obstructions carefully using a rod or pole. 2. Clean the filters: Ensure that the pre-motor filter and exhaust filter are clean and free from debris. Refer to the manual for instructions on cleaning or replacing the filters. 3. Adjust the suction power: Reduce the suction power to a lower setting if it is set too high. This can help prevent overheating by reducing the strain on the motor. 4. Allow the cleaner to cool down: If the cleaner has been in use for an extended period, switch it off and unplug it from the power supply. Allow the cleaner to cool down for approximately 30 minutes before using it again. 5. Check the environment: Ensure that the cleaner is being used in a well-ventilated area. Avoid using the cleaner in excessively hot or humid conditions, as this can contribute to overheating. By following these steps, you can troubleshoot and prevent overheating issues with the Hoover Capture TCP 2010 vacuum cleaner. If the problem persists, it is recommended to contact your local Hoover service office for further assistance.
To address weak suction power in the Hoover Capture TCP 2010 vacuum cleaner, follow these steps: 1. Check the dust bag: Ensure that the dust bag is not full or clogged. If it is, empty or replace the dust bag according to the instructions provided in the manual. 2. Clean or replace the filters: Inspect the pre-motor filter and exhaust filter for dirt or blockages. Clean or replace the filters as necessary, following the instructions in the manual. 3. Check for blockages: Examine the hose, wand, and nozzle for any obstructions that may be impeding airflow. Remove any debris or blockages carefully using a rod or pole. 4. Adjust the suction power: Ensure that the suction power is set to the appropriate level for the surface being cleaned. Refer to the manual for instructions on adjusting the suction power. 5. Inspect the brush roll: Check the brush roll for tangled hair, threads, or debris. Remove any obstructions and clean the brush roll thoroughly. By following these steps, you can address weak suction power in the Hoover Capture TCP 2010 vacuum cleaner. If the issue persists, it is recommended to contact your local Hoover service office for further assistance.
To troubleshoot if the vacuum cleaner's hose or nozzle is blocked, follow these steps: 1. Turn off and unplug the vacuum cleaner: Ensure that the vacuum cleaner is switched off and unplugged from the power supply before proceeding. 2. Inspect the hose: Check the hose for any visible blockages or obstructions. Look for items such as debris, small objects, or tangled hair that may be causing the blockage. 3. Remove the blockage: If you identify a blockage in the hose, carefully remove it using a long, flexible rod or a straightened wire coat hanger. Gently push the rod or wire through the hose to dislodge the blockage. 4. Check the nozzle: Examine the nozzle for any blockages or clogs. Remove any debris or obstructions using a small brush or by hand, ensuring that the nozzle is completely clear. 5. Reassemble and test: Once you have cleared any blockages from the hose and nozzle, reassemble the vacuum cleaner and plug it back in. Test the suction power to ensure that it has improved. By following these steps, you can troubleshoot and resolve blockages in the hose or nozzle of the Hoover Capture TCP 2010 vacuum cleaner. If the issue persists, it is recommended to contact your local Hoover service office for further assistance.
Yes, the manual of the Hoover Capture TCP 2010 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 0