View the manual for the Hoover BH50120 here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Hoover BH50120 or do you need help? Ask your question here




| Brand | Hoover |
| Model | BH50120 | BH50120 |
| Product | vacuum cleaner |
| EAN | 73502039106, 0073502039106 |
| Language | English |
| Filetype | User manual (PDF) |
| Maximum input power | - W |
| Annual energy consumption | - kWh |
| Charging time | 3 h |
| Battery technology | Lithium-Ion (Li-Ion) |
| Dust container type | Bagless |
| Tube material | - |
| Product color | Gray |
| Dust capacity | - L |
| Product type | Upright vacuum |
| Vacuum air filtering | - |
| Cleaning surfaces | Carpet, Hard floor |
| - | |
| - | |
| - | |
| Cleaning type | Dry |
| Noise level | - dB |
| Dirt separating method | Multi cyclonic |
| Cord length | - m |
| Weight | 4490.56 g |
| Crevice tool | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover BH50120 below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover BH50120 has a weight of 4490.56 g.
Yes, the Hoover BH50120 has a bagless dust container. This means that users do not need to purchase or replace bags, making it more convenient and cost-effective compared to vacuum cleaners with bagged containers.
The Hoover BH50120 is designed to clean both carpeted and hard floors. This versatility ensures that users can effectively clean different types of surfaces in their homes.
Yes, the Hoover BH50120 is a dry cleaner. This means that it is suitable for picking up dry debris such as dust, crumbs, and pet hair.
Yes, the Hoover BH50120 comes with a crevice tool. This additional tool allows users to clean hard-to-reach areas such as tight corners, edges, and crevices, enhancing the overall cleaning performance of the vacuum cleaner.
The Hoover BH50120 utilizes a multi cyclonic dirt separating method. This is a high-performance system that efficiently separates dirt and debris from the airflow, preventing clogging and maintaining strong suction power. This makes the Hoover BH50120 a reliable choice for effective cleaning.
To troubleshoot if the Hoover BH50120 vacuum cleaner is not picking up dirt properly, follow these steps: 1. Check the dirt cup: Ensure that the dirt cup is not full and has not reached the maximum fill line. If it is full, empty the dirt cup by pressing the lower button and snapping it closed. Place the cup back, bottom first. 2. Clean the filter: A clogged filter can affect the suction power. Remove the filter by twisting the top lid to the dirt cup and rinsing it with clear warm water for two minutes. Let it dry for 24 hours before reinstalling it. 3. Check for clogs: If the filter was dirty, there may be a clog in the system. Unhook the hose from the bottom and stretch it down to search for a clog. If a clog is found, remove it. 4. Verify brush roll activation: If the vacuum picks up well on hard floors but not on carpets, check if the brush roll is spinning. Press the carpet/hard floor button next to the handle to activate the brush roll. 5. Use the wand for above-floor cleaning: To use the wand for above-floor cleaning, press the wand release lever next to the power button. Slide the wand up and out, and attach it to the hose. Refer to page 7 of the manual for further details. If these troubleshooting steps do not resolve the issue, it is recommended to contact an authorized service representative for further assistance.
If the Hoover BH50120 vacuum cleaner is not turning on, you can try the following steps: 1. Check the battery: Ensure that the battery is properly inserted into the vacuum cleaner. If it is not, remove the battery and reinsert it securely. 2. Charge the battery: If the battery is low or completely drained, connect the vacuum cleaner to the charger and allow it to charge for the recommended time mentioned in the manual. 3. Verify the power switch: Make sure that the power switch is in the "on" position. If it is already in the "on" position, try toggling it off and on again. 4. Check the power source: Ensure that the charger is plugged into a working power outlet. If the outlet is not providing power, try plugging the charger into a different outlet. 5. Contact customer support: If the vacuum cleaner still does not turn on after following these steps, it is recommended to contact Hoover customer support for further assistance. Please note that these troubleshooting steps are general recommendations and may vary depending on the specific model of the Hoover BH50120 vacuum cleaner.
To troubleshoot if the Hoover BH50120 vacuum cleaner is not maintaining suction power, follow these steps: 1. Check the filter: A clogged filter can affect suction power. Remove the filter by twisting the top lid to the dirt cup and rinsing it with clear warm water for two minutes. Let it dry for 24 hours before reinstalling it. 2. Look for clogs: If the filter was dirty, there may be a clog in the system. Unhook the hose from the bottom and stretch it down to search for a clog. If a clog is found, remove it. 3. Verify brush roll activation: If the vacuum picks up well on hard floors but not on carpets, check if the brush roll is spinning. Press the carpet/hard floor button next to the handle to activate the brush roll. 4. Use the wand for above-floor cleaning: To use the wand for above-floor cleaning, press the wand release lever next to the power button. Slide the wand up and out, and attach it to the hose. Refer to page 7 of the manual for further details. If these troubleshooting steps do not resolve the issue, it is recommended to contact an authorized service representative for further assistance. Please note that these steps are based on the information provided in the manual for the Hoover BH50120 vacuum cleaner.
To troubleshoot if the Hoover BH50120 vacuum cleaner is not charging properly, you can follow these steps: 1. Check the battery placement: Ensure that the battery is properly inserted into the vacuum cleaner. It should click into place securely. 2. Verify the charger connection: Make sure that the charger is securely plugged into a working power outlet. Check that the charger is properly connected to the vacuum cleaner. 3. Clean the battery contacts: If the battery contacts are dirty or corroded, it can affect the charging process. Use a clean, dry cloth to wipe the battery contacts on both the vacuum cleaner and the battery. 4. Allow sufficient charging time: The battery may require a certain amount of time to charge fully. Refer to the manual for the recommended charging time. Make sure to leave the vacuum cleaner connected to the charger for the specified duration. 5. Contact customer support: If the vacuum cleaner still does not charge properly after following these steps, it is recommended to contact Hoover customer support for further assistance. Please note that these troubleshooting steps are based on general recommendations and may vary depending on the specific model of the Hoover BH50120 vacuum cleaner.
To troubleshoot if the Hoover BH50120 vacuum cleaner is making unusual noises during operation, follow these steps: 1. Check for obstructions: Turn off the vacuum cleaner and unplug it from the power source. Inspect the brush roll, hose, and nozzle for any debris or objects that may be causing the noise. Remove any obstructions found. 2. Clean the brush roll: If the brush roll is making a rattling or grinding noise, it may be due to tangled hair, threads, or debris. Turn off the vacuum cleaner and remove the brush roll. Clean it thoroughly, removing any entangled debris. 3. Inspect the belt: A worn or damaged belt can cause unusual noises. Turn off the vacuum cleaner and unplug it. Check the belt for signs of wear or damage. If necessary, replace the belt following the instructions in the manual. 4. Check the filters: A clogged or dirty filter can affect the airflow and cause unusual noises. Remove the filter and clean or replace it as needed. 5. Contact customer support: If the vacuum cleaner continues to make unusual noises after following these steps, it is recommended to contact Hoover customer support for further assistance. Please note that these troubleshooting steps are general recommendations and may vary depending on the specific model of the Hoover BH50120 vacuum cleaner.
To ensure optimal performance and longevity of your Hoover BH50120 vacuum cleaner, regular maintenance is recommended. Here are the steps you can follow for maintenance: 1. Cleaning the dust container: After each use, empty the dust container and clean it thoroughly. Remove any debris or dirt that may have accumulated inside. Use a damp cloth to wipe the container and ensure it is completely dry before reattaching it to the vacuum cleaner. 2. Checking the filters: Regularly inspect the filters of the Hoover BH50120 vacuum cleaner. If the filters are dirty or clogged, remove them and clean them according to the manufacturer's instructions. Allow the filters to dry completely before reinstalling them. 3. Brush roll maintenance: Check the brush roll for any tangled hair, threads, or debris. Use scissors or a brush to remove any obstructions. Ensure that the brush roll spins freely and smoothly. 4. Inspecting the power cord: Regularly check the power cord for any signs of damage or wear. If you notice any fraying or exposed wires, discontinue use and contact Hoover customer support for assistance. 5. Storage: When not in use, store the Hoover BH50120 vacuum cleaner in a clean and dry area. Avoid storing it in extreme temperatures or humid environments. By following these maintenance steps, you can keep your Hoover BH50120 vacuum cleaner in optimal condition and ensure its efficient performance for a long time.
There could be several reasons why the Hoover BH50120 vacuum cleaner is not turning on. Here are some possible troubleshooting steps: 1. Check the power source: Ensure that the vacuum cleaner is properly plugged into a functioning power outlet. If it is plugged in, try using a different outlet to rule out any issues with the power source. 2. Examine the power cord: Inspect the power cord for any visible damage or fraying. If you notice any damage, discontinue use and contact Hoover customer support for assistance. 3. Verify the battery connection: If your vacuum cleaner is cordless, make sure the battery is securely connected to the vacuum cleaner. Remove the battery and reattach it to ensure a proper connection. 4. Check the battery charge: If the vacuum cleaner is cordless and not turning on, the battery may be depleted. Place the battery on the charger and ensure it is fully charged before attempting to use the vacuum cleaner again. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Hoover customer support for further assistance. They will be able to provide specific troubleshooting steps based on the model and any potential issues with the vacuum cleaner. Remember, these troubleshooting steps are general guidelines and may vary depending on the specific model of the Hoover BH50120 vacuum cleaner.
To properly use the Hoover BH50120 vacuum cleaner, follow these steps: 1. Assembly: Before using the vacuum cleaner, ensure that it is fully assembled according to the instructions provided in the manual. 2. Power source: Plug the vacuum cleaner into a functioning power outlet. Make sure the power cord is securely connected. 3. Controls: Familiarize yourself with the controls of the vacuum cleaner. This may include power buttons, mode settings, and brush roll controls. Refer to the manual for specific instructions on operating the controls. 4. Cleaning surfaces: Start by selecting the appropriate cleaning mode for the surface you are cleaning. For example, use the appropriate setting for carpets, hard floors, or upholstery. Adjust the brush roll height if necessary. 5. Maneuvering: Hold the vacuum cleaner handle firmly and push or pull it in a back-and-forth motion to clean the desired area. Use the attachments provided for cleaning hard-to-reach areas, corners, or furniture. 6. Emptying the dust container: When the dust container is full, detach it from the vacuum cleaner and empty the contents into a trash bin. Follow the instructions in the manual for proper dust container maintenance. 7. Maintenance: Regularly clean the filters and brush roll of the vacuum cleaner as instructed in the manual. Check for any blockages or obstructions that may affect the performance. 8. Storage: After use, store the Hoover BH50120 vacuum cleaner in a clean and dry area. Keep it away from extreme temperatures or moisture. By following these steps, you can effectively and safely use the Hoover BH50120 vacuum cleaner for your cleaning needs.
If the Hoover BH50120 vacuum cleaner is not picking up dirt effectively, you can try the following steps: 1. Check the dirt cup: Ensure that the dirt cup is not full and empty it if necessary. Press the lower button to release the dirt cup, empty it, and snap it closed before reattaching it to the vacuum cleaner. 2. Clean the filters: A clogged filter can affect the vacuum cleaner's performance. Rinse the filter with clear warm water for two minutes and let it dry for 24 hours before reinstalling it. If the filter was dirty, there may also be a clog in the system. Unhook the hose from the bottom and stretch it down to search for a clog. If found, remove the clog. 3. Check the brush roll: Ensure that the brush roll is spinning while vacuuming. If it is not, press the carpet/hard floor button next to the handle to activate it. If the brush roll is obstructed, the Motor Protection Sensor may have been activated. Remove the battery, find and remove the obstruction, wait 30 minutes for the unit to reset, and then replace the battery. If these steps do not resolve the issue, it is recommended to contact Hoover customer support for further assistance.
When using the Hoover BH50120 vacuum cleaner, it is important to follow these safety precautions: 1. Read the manual: Familiarize yourself with the instructions and safety guidelines provided in the manual before using the vacuum cleaner. 2. Power source: Ensure that the vacuum cleaner is plugged into a properly grounded power outlet. Do not use an extension cord unless it is specifically recommended by the manufacturer. 3. Cord management: Keep the power cord away from sharp edges, hot surfaces, and moving parts to prevent damage. Avoid running the vacuum cleaner over the power cord. 4. Observe the environment: Before starting the vacuum cleaner, remove any large objects, small toys, or debris that could obstruct the cleaning path. Be cautious of loose rugs or cords that may cause tripping hazards. 5. Avoid liquids: The Hoover BH50120 vacuum cleaner is designed for dry use only. Do not use it to pick up liquids or operate it in wet areas. 6. Overheating prevention: To prevent overheating, avoid blocking the airflow by keeping the air vents and filters clean and clear of obstructions. 7. Unplug when not in use: Always unplug the vacuum cleaner from the power source when it is not in use, during maintenance, or when changing accessories. By following these safety precautions, you can ensure a safe and effective cleaning experience with the Hoover BH50120 vacuum cleaner.
To ensure optimal performance and longevity of your Hoover BH50120 vacuum cleaner, regular maintenance is recommended. Here are the steps you can follow for maintenance: 1. Cleaning the dust container: After each use, empty the dust container and clean it thoroughly. Remove any debris or dirt that may have accumulated inside. Use a damp cloth to wipe the container and ensure it is completely dry before reattaching it to the vacuum cleaner. 2. Checking the filters: Regularly inspect the filters of the Hoover BH50120 vacuum cleaner. If the filters are dirty or clogged, remove them and clean them according to the manufacturer's instructions. Allow the filters to dry completely before reinstalling them. 3. Brush roll maintenance: Check the brush roll for any tangled hair, threads, or debris. Use scissors or a brush to remove any obstructions. Ensure that the brush roll spins freely and smoothly. 4. Inspecting the power cord: Regularly check the power cord for any signs of damage or wear. If you notice any fraying or exposed wires, discontinue use and contact Hoover customer support for assistance. 5. Storage: When not in use, store the Hoover BH50120 vacuum cleaner in a clean and dry area. Avoid storing it in extreme temperatures or humid environments. By following these maintenance steps, you can keep your Hoover BH50120 vacuum cleaner in optimal condition and ensure its efficient performance for a long time.
There could be several reasons why the Hoover BH50120 vacuum cleaner is not turning on. Here are some possible troubleshooting steps: 1. Check the power source: Ensure that the vacuum cleaner is properly plugged into a functioning power outlet. If it is plugged in, try using a different outlet to rule out any issues with the power source. 2. Examine the power cord: Inspect the power cord for any visible damage or fraying. If you notice any damage, discontinue use and contact Hoover customer support for assistance. 3. Verify the battery connection: If your vacuum cleaner is cordless, make sure the battery is securely connected to the vacuum cleaner. Remove the battery and reattach it to ensure a proper connection. 4. Check the battery charge: If the vacuum cleaner is cordless and not turning on, the battery may be depleted. Place the battery on the charger and ensure it is fully charged before attempting to use the vacuum cleaner again. 5. Contact customer support: If none of the above steps resolve the issue, it is recommended to contact Hoover customer support for further assistance. They will be able to provide specific troubleshooting steps based on the model and any potential issues with the vacuum cleaner. Remember, these troubleshooting steps are general guidelines and may vary depending on the specific model of the Hoover BH50120 vacuum cleaner.
To properly use the Hoover BH50120 vacuum cleaner, follow these steps: 1. Assembly: Before using the vacuum cleaner, ensure that it is fully assembled according to the instructions provided in the manual. 2. Power source: Plug the vacuum cleaner into a functioning power outlet. Make sure the power cord is securely connected. 3. Controls: Familiarize yourself with the controls of the vacuum cleaner. This may include power buttons, mode settings, and brush roll controls. Refer to the manual for specific instructions on operating the controls. 4. Cleaning surfaces: Start by selecting the appropriate cleaning mode for the surface you are cleaning. For example, use the appropriate setting for carpets, hard floors, or upholstery. Adjust the brush roll height if necessary. 5. Maneuvering: Hold the vacuum cleaner handle firmly and push or pull it in a back-and-forth motion to clean the desired area. Use the attachments provided for cleaning hard-to-reach areas, corners, or furniture. 6. Emptying the dust container: When the dust container is full, detach it from the vacuum cleaner and empty the contents into a trash bin. Follow the instructions in the manual for proper dust container maintenance. 7. Maintenance: Regularly clean the filters and brush roll of the vacuum cleaner as instructed in the manual. Check for any blockages or obstructions that may affect the performance. 8. Storage: After use, store the Hoover BH50120 vacuum cleaner in a clean and dry area. Keep it away from extreme temperatures or moisture. By following these steps, you can effectively and safely use the Hoover BH50120 vacuum cleaner for your cleaning needs.
If the Hoover BH50120 vacuum cleaner is not picking up dirt effectively, you can try the following steps: 1. Check the dirt cup: Ensure that the dirt cup is not full and empty it if necessary. Press the lower button to release the dirt cup, empty it, and snap it closed before reattaching it to the vacuum cleaner. 2. Clean the filters: A clogged filter can affect the vacuum cleaner's performance. Rinse the filter with clear warm water for two minutes and let it dry for 24 hours before reinstalling it. If the filter was dirty, there may also be a clog in the system. Unhook the hose from the bottom and stretch it down to search for a clog. If found, remove the clog. 3. Check the brush roll: Ensure that the brush roll is spinning while vacuuming. If it is not, press the carpet/hard floor button next to the handle to activate it. If the brush roll is obstructed, the Motor Protection Sensor may have been activated. Remove the battery, find and remove the obstruction, wait 30 minutes for the unit to reset, replace the battery, and turn on the vacuum cleaner. If these steps do not resolve the issue, it is recommended to contact Hoover customer support for further assistance.
When using the Hoover BH50120 vacuum cleaner, it is important to follow these safety precautions: 1. Read the manual: Familiarize yourself with the instructions and safety guidelines provided in the manual before using the vacuum cleaner. 2. Power source: Ensure that the vacuum cleaner is plugged into a properly grounded power outlet. Avoid using extension cords or adapters that may not be compatible with the vacuum cleaner. 3. Cord management: Keep the power cord away from sharp edges, hot surfaces, and moving parts of the vacuum cleaner. Do not pull or yank the cord forcefully, as it may cause damage. 4. Observe the environment: Before starting the vacuum cleaner, remove any large objects, loose rugs, or cords from the area to prevent tripping hazards and potential damage to the vacuum cleaner. 5. Avoid liquids: The Hoover BH50120 vacuum cleaner is not designed for wet or damp cleaning. Do not use it on wet surfaces or attempt to vacuum liquids. 6. Overheating prevention: To prevent overheating, avoid using the vacuum cleaner continuously for extended periods. If the vacuum cleaner becomes hot, turn it off and allow it to cool down before resuming use. 7. Maintenance: Regularly clean and maintain the vacuum cleaner as instructed in the manual. This includes emptying the dust container, cleaning the filters, and checking for any blockages. By following these safety precautions, you can ensure a safe and effective cleaning experience with the Hoover BH50120 vacuum cleaner.
Yes, the manual of the Hoover BH50120 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 4The metal contacts are pitted. Can. I getthem. #BH50120@
How do I get the manual for the BH50120. Our vacuum quit working.
Electrical schematic of BH50120
How do I download the manual and the electrical schematics