View the manual for the Hoover Athos here, for free. This manual comes under the category vacuum cleaners and has been rated by 2 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Hoover Athos or do you need help? Ask your question here

| Brand | Hoover |
| Model | Athos | TAT 2201 |
| Product | vacuum cleaner |
| EAN | 8016361872967 |
| Language | English |
| Filetype | User manual (PDF), Datasheet (PDF) |
| Maximum input power | 2200 W |
| Suction power | 400 AW |
| Annual energy consumption | - kWh |
| Variable power | Yes |
| Power control | Electronic |
| Type | Cylinder vacuum |
| Dust container type | Dust bag |
| Tube material | Metal |
| Product color | Red |
| Tube type | Telescopic |
| Dust capacity | 5 L |
| Cleaning type | Dry |
| Vacuum air filtering | HEPA |
| Proper use | Home |
| Cleaning surfaces | Carpet, Hard floor |
| - | |
| - | |
| - | |
| Noise level | - dB |
| Operating radius | 11 m |
| Dirt separating method | Filtering |
| Dust container full indicator | Yes |
| Automatic cord rewinder | Yes |
| Cord length | 8 m |
| Cord storage | Yes |
| Weight | - g |
| Vacuum brushes included | Hard floor brush |
| Upholstery nozzle included | Yes |
| Crevice tool | Yes |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Hoover Athos below.
Your Hoover vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Hoover Athos has a weight of - g.
Yes, the Hoover Athos has a maximum input power of 2200 W, which means it provides high suction power for efficient cleaning.
Yes, the Hoover Athos is equipped with a HEPA filter, making it great for trapping small particles and allergens, creating a healthier environment for the user compared to standard filters.
The Hoover Athos comes with a dust bag as the dust container type, which can hold up to 5 L of dust and dirt before needing to be replaced.
Yes, the Hoover Athos features a telescopic metal tube, allowing users to adjust the length for comfortable cleaning and reaching difficult areas.
The Hoover Athos has an operating radius of 11 m, providing users with ample reach without having to constantly switch power outlets, making it convenient for larger spaces.
To ensure safe use of the Hoover Athos vacuum cleaner, follow these steps: 1. Read the user guide: Before operating the vacuum cleaner, thoroughly read and understand the user guide provided with the product. 2. Unplug after use: Always switch off the vacuum cleaner and remove the plug from the socket after each use. This prevents any accidental activation and reduces the risk of electrical hazards. 3. Supervise children: The vacuum cleaner can be used by children aged 8 years and above, but they should be supervised or instructed on safe usage. Children should not play with the appliance. 4. Use recommended attachments and consumables: Only use attachments, consumables, and spares recommended or supplied by Hoover. Using incompatible accessories may affect the performance and safety of the vacuum cleaner. 5. Avoid hazards: Keep hands, feet, loose clothing, and hair away from rotating brushes to prevent entanglement. Do not pick up hard or sharp objects, flammable liquids, or other hazardous materials. 6. Regular maintenance: Clean the exhaust filter and empty the dust bag regularly as instructed in the user guide. Do not continue using the vacuum cleaner if it appears faulty. 7. Authorized servicing: For any servicing or repairs, contact an authorized Hoover service engineer to ensure the continued safe and efficient operation of the appliance. Remember, these steps are essential for safe usage of the Hoover Athos vacuum cleaner and to prevent any accidents or damage.
If the Hoover Athos vacuum cleaner is not turning on, you can try the following steps: 1. Check the electricity supply: Ensure that there is a working electricity supply to the cleaner. You can check this by plugging in and testing another electrical appliance. 2. Verify the dust bag: Check if the dust bag is over-filled. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on replacing the dust bag. 3. Inspect the filter: Examine the filter to see if it is blocked. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on cleaning the filter. 4. Check for blockages: Inspect the hose or nozzle for any blockages. Use a rod or pole to remove any blockage from the telescopic tube or flexible hose. 5. Allow for automatic reset: If the cleaner has overheated, it may take approximately 45 minutes for the cut-out to automatically reset. Wait for this period and then try turning on the vacuum cleaner again. If these steps do not resolve the issue, it is recommended to contact an authorized Hoover service engineer for further assistance.
To clean the exhaust filter of the Hoover Athos vacuum cleaner, follow these steps: 1. Open the bag door of the vacuum cleaner and remove the filter pack. 2. Wash the filter in hand warm water, ensuring not to use hot water or detergents. 3. Thoroughly dry the filter before replacing it back into the cleaner. 4. Do not use the vacuum cleaner without a dust bag or filter fitted. 5. If the filters become damaged, replace them with genuine Hoover replacements. It is important to clean the exhaust filter regularly to maintain the performance and efficiency of the vacuum cleaner. By following these steps, you can ensure that the exhaust filter is clean and functioning properly, allowing the vacuum cleaner to effectively remove dirt and dust from your home.
The Hoover Athos vacuum cleaner is compatible with the following accessories and nozzles: 1. Crevice Tool: This accessory is designed for reaching narrow and hard-to-reach spaces, such as corners and crevices. 2. Dusting Brush: The dusting brush attachment is ideal for gently dusting delicate surfaces, such as furniture, shelves, and curtains. 3. Furniture Nozzle: This nozzle is specifically designed for cleaning upholstery and furniture, effectively removing dust and debris. 4. Pet Hair Remover Mini Turbo Nozzle: This specialized nozzle is designed to effectively remove pet hair from upholstery, carpets, and other surfaces. 5. Allergy Remover Mini Turbo Nozzle: This nozzle is designed to remove allergens, such as dust mites and pet dander, from carpets and upholstery. 6. Grand Turbo Nozzle: The grand turbo nozzle is suitable for deep cleaning carpets, providing powerful suction and agitation to remove embedded dirt and debris. 7. Parquet Nozzle: This nozzle is designed for cleaning delicate hard floors, such as parquet or laminate, without causing any damage. Please note that the availability of these accessories may vary depending on the model of the Hoover Athos vacuum cleaner.
To troubleshoot if the Hoover Athos vacuum cleaner is not picking up dirt effectively, you can follow these steps: 1. Check the dust bag: Ensure that the dust bag is not overfilled. If it is, replace it with a new one as instructed in the user guide. 2. Clean or replace the filter: Check if the filter is dirty or clogged. If so, clean it according to the instructions provided in the user guide. If the filter is damaged or worn out, replace it with a genuine Hoover replacement. 3. Inspect the nozzle and attachments: Check for any blockages or obstructions in the nozzle or attachments. Remove any debris or tangled hair that may be affecting the suction power. 4. Adjust the suction power: If the vacuum cleaner has adjustable suction power, ensure that it is set to the appropriate level for the cleaning task. Higher suction power may be required for carpets, while lower power may be suitable for delicate surfaces. 5. Check for leaks: Inspect the hose, connections, and seals for any leaks or loose fittings. Tighten or replace any parts as necessary to maintain proper suction. By following these troubleshooting steps, you can address common issues that may be causing the Hoover Athos vacuum cleaner to not pick up dirt effectively.
To ensure safe use of the Hoover Athos vacuum cleaner, follow these steps: 1. Read the user guide: Before operating the vacuum cleaner, thoroughly read and understand the user guide provided with the product. 2. Unplug after use: Always switch off the vacuum cleaner and remove the plug from the socket after each use. This prevents any accidental activation and reduces the risk of electrical hazards. 3. Supervise children: The vacuum cleaner can be used by children aged 8 years and above, but they should be supervised or instructed on safe usage. Children should not play with the appliance. 4. Use recommended attachments and consumables: Only use attachments, consumables, and spares recommended or supplied by Hoover. Using incompatible accessories may affect the performance and safety of the vacuum cleaner. 5. Avoid hazards: Keep hands, feet, loose clothing, and hair away from rotating brushes to prevent entanglement. Do not pick up hard or sharp objects, flammable liquids, or other hazardous materials. 6. Regular maintenance: Clean the exhaust filter and empty the dust bag regularly as instructed in the user guide. Do not continue using the vacuum cleaner if it appears faulty. 7. Authorized servicing: For any servicing or repairs, contact an authorized Hoover service engineer to ensure the continued safe and efficient operation of the appliance. Remember, these steps are essential for safe usage of the Hoover Athos vacuum cleaner and to prevent any accidents or damage.
If the Hoover Athos vacuum cleaner is not turning on, you can try the following steps: 1. Check the electricity supply: Ensure that there is a working electricity supply to the cleaner. You can check this by plugging in and turning on another electrical appliance. 2. Verify the dust bag: Check if the dust bag is over-filled. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on replacing the dust bag. 3. Inspect the filter: Examine the filter to see if it is blocked. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on cleaning the filter. 4. Check for blockages: Inspect the hose or nozzle for any blockages. Use a rod or pole to remove any blockage from the telescopic tube or flexible hose. 5. Allow for automatic reset: If the cleaner has overheated, it will take approximately 45 minutes for the cut-out to automatically reset. During this time, ensure that the cleaner is switched off and unplugged. If none of these steps resolve the issue, it is recommended to contact an authorized Hoover service engineer for further assistance.
To clean the exhaust filter of the Hoover Athos vacuum cleaner, follow these steps: 1. Open the bag door of the vacuum cleaner and remove the filter pack. 2. Wash the filter in hand warm water, ensuring not to use hot water or detergents. 3. Thoroughly dry the filter before replacing it back into the cleaner. 4. Do not use the vacuum cleaner without a dust bag or filter fitted. 5. If the filters become damaged, replace them with genuine Hoover replacements. 6. For certain models of the Hoover Athos vacuum cleaner, there is a permanent cloth dust bag that should be washed under hand warm water after every 5 full bags. 7. Remove excess water from the cloth dust bag and allow it to fully dry before replacing it. By regularly cleaning the exhaust filter and the permanent cloth dust bag (if applicable), you can maintain the performance and efficiency of your Hoover Athos vacuum cleaner.
The Hoover Athos vacuum cleaner is compatible with the following accessories and nozzles: 1. Crevice Tool: This accessory is designed for reaching narrow and hard-to-reach spaces, such as corners and crevices. 2. Dusting Brush: The dusting brush attachment is ideal for gently dusting delicate surfaces, such as furniture, shelves, and curtains. 3. Furniture Nozzle: This nozzle is specifically designed for cleaning upholstery and furniture, effectively removing dust and debris. 4. Pet Hair Remover Mini Turbo Nozzle: This specialized nozzle is designed to effectively remove pet hair from upholstery, carpets, and other surfaces. 5. Allergy Remover Mini Turbo Nozzle: This nozzle is designed to remove allergens, such as dust mites and pet dander, from carpets and upholstery. 6. Grand Turbo Nozzle: The grand turbo nozzle is suitable for deep cleaning carpets, providing powerful suction and agitation for thorough dirt removal. 7. Parquet Nozzle: This nozzle is designed for cleaning delicate hard floors, such as parquet or laminate, without causing any damage. Please note that the availability of these accessories and nozzles may vary depending on the specific model of the Hoover Athos vacuum cleaner.
To troubleshoot if the Hoover Athos vacuum cleaner is not picking up dirt effectively, you can follow these steps: 1. Check the dust bag: Ensure that the dust bag is not overfilled. If it is, replace it with a new one as instructed in the user guide. 2. Clean or replace the filter: Check if the filter is dirty or clogged. If so, clean it according to the instructions provided in the user guide. If the filter is damaged or worn out, replace it with a genuine Hoover replacement. 3. Inspect the nozzle and attachments: Check for any blockages or obstructions in the nozzle or attachments. Remove any debris or tangled hair that may be affecting the suction power. 4. Adjust the suction power: If the vacuum cleaner has adjustable suction power, ensure that it is set to the appropriate level for the cleaning task. Higher suction power may be required for carpets, while lower power may be suitable for delicate surfaces. 5. Check for leaks: Inspect the hose, connections, and seals for any leaks or loose fittings. Tighten or replace any parts as necessary to maintain proper suction. By following these troubleshooting steps, you can improve the dirt pick-up effectiveness of your Hoover Athos vacuum cleaner and ensure optimal cleaning performance.
To ensure safe use of the Hoover Athos vacuum cleaner, follow these steps: 1. Read the user guide: Before operating the vacuum cleaner, thoroughly read and understand the user guide provided with the product. 2. Unplug after use: Always switch off the vacuum cleaner and remove the plug from the socket after each use. This prevents any accidental activation and reduces the risk of electrical hazards. 3. Supervise children: The vacuum cleaner can be used by children aged 8 years and above, but they should be supervised or instructed on safe usage. Children should not play with the appliance. 4. Use recommended attachments and consumables: Only use attachments, consumables, and spares recommended or supplied by Hoover. Using incompatible accessories may affect the performance and safety of the vacuum cleaner. 5. Avoid hazards: Keep hands, feet, loose clothing, and hair away from rotating brushes to prevent entanglement. Do not pick up hard or sharp objects, flammable liquids, or other hazardous materials. 6. Regular maintenance: Clean the exhaust filter and empty the dust bag regularly as instructed in the user guide. Do not continue using the vacuum cleaner if it appears faulty. 7. Authorized servicing: For any servicing or repairs, contact an authorized Hoover service engineer to ensure the continued safe and efficient operation of the appliance. Remember, these steps are essential for safe usage of the Hoover Athos vacuum cleaner and to prevent any accidents or damage.
If the Hoover Athos vacuum cleaner is not turning on, you can try the following steps: 1. Check the electricity supply: Ensure that there is a working electricity supply to the cleaner. You can check this by plugging in and turning on another electrical appliance. 2. Verify the dust bag: Check if the dust bag is over-filled. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on replacing the dust bag. 3. Inspect the filter: Examine the filter to see if it is blocked. If it is, refer to the "Cleaner Maintenance" section in the user guide for instructions on cleaning the filter. 4. Check for blockages: Inspect the hose or nozzle for any blockages. Use a rod or pole to remove any blockage from the telescopic tube or flexible hose. 5. Allow for automatic reset: If the cleaner has overheated, it will take approximately 45 minutes for the cut-out to automatically reset. During this time, ensure that the cleaner is switched off and unplugged. If none of these steps resolve the issue, it is recommended to contact an authorized Hoover service engineer for further assistance. They will be able to diagnose and address any underlying faults with the vacuum cleaner.
To clean the exhaust filter of the Hoover Athos vacuum cleaner, follow these steps: 1. Open the bag door of the vacuum cleaner and remove the filter pack. 2. Wash the filter in hand warm water, ensuring not to use hot water or detergents. 3. Thoroughly dry the filter before replacing it back into the cleaner. 4. Do not use the vacuum cleaner without a dust bag or filter fitted. 5. If the filters become damaged, replace them with genuine Hoover replacements. 6. For certain models, there is a permanent cloth dust bag that should be washed under hand warm water after every 5 full bags. 7. Remove excess water from the cloth dust bag and allow it to fully dry before replacing it. By regularly cleaning the exhaust filter and the permanent cloth dust bag (if applicable), you can maintain the performance and efficiency of your Hoover Athos vacuum cleaner. Remember to always use genuine Hoover replacement parts for optimal results.
The Hoover Athos vacuum cleaner is compatible with the following accessories and nozzles: 1. Crevice Tool: This accessory is designed for reaching narrow and hard-to-reach spaces, such as corners and crevices. 2. Dusting Brush: The dusting brush attachment is ideal for gently dusting delicate surfaces, such as furniture, shelves, and curtains. 3. Furniture Nozzle: This nozzle is specifically designed for cleaning upholstery and furniture, effectively removing dust and debris. 4. Pet Hair Remover Mini Turbo Nozzle: This specialized nozzle is designed to effectively remove pet hair from upholstery, carpets, and other surfaces. 5. Allergy Remover Mini Turbo Nozzle: This nozzle is designed to remove allergens, such as dust mites and pet dander, from carpets and upholstery. 6. Grand Turbo Nozzle: The grand turbo nozzle is suitable for deep cleaning carpets, providing powerful suction and agitation for thorough dirt removal. 7. Parquet Nozzle: This nozzle is designed for cleaning delicate hard floors, such as parquet or laminate, without causing any damage. Please note that the availability of these accessories and nozzles may vary depending on the specific model of the Hoover Athos vacuum cleaner.
To troubleshoot if the Hoover Athos vacuum cleaner is not picking up dirt effectively, you can follow these steps: 1. Check the dust bag: Ensure that the dust bag is not overfilled. If it is, replace it with a new one as instructed in the user guide. 2. Clean or replace the filter: Check if the filter is dirty or clogged. If so, clean it according to the instructions provided in the user guide. If the filter is damaged or worn out, replace it with a genuine Hoover replacement filter. 3. Inspect the nozzle and attachments: Check for any blockages or obstructions in the nozzle or attachments. Remove any debris or tangled hair that may be preventing proper suction. 4. Adjust the suction power: If the vacuum cleaner has adjustable suction power, ensure that it is set to the appropriate level for the type of surface you are cleaning. Higher suction power may be needed for carpets, while lower power may be suitable for hard floors. 5. Check for leaks: Inspect the vacuum cleaner for any air leaks that may be affecting its performance. Ensure that all connections are secure and there are no cracks or damages in the hose or other parts. By following these troubleshooting steps, you can improve the dirt-picking efficiency of your Hoover Athos vacuum cleaner. If the issue persists, it is recommended to contact an authorized Hoover service center for further assistance.
Yes, the manual of the Hoover Athos is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Hoover and is the answer not in the manual?
Question and answer
Number of questions: 0