Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
28
If ADD NEW email server was selected, enter the appropriate SMTP
and port number information (see your email provider for details).
d. Press Save.
3. Press Event 1 to define the event types and conditions that will trigger
notifications to the chosen email address(es).
4. Enter up to four email address(es) to which Event 1 will send
notifications.
5. Press Save.
6. Repeat steps three through five for Events two through four if desired.
NOTES: If sending the e-mail, and it fails a failure notification icon will
display on the “User SMTP” icon in Email Setup.Verify your
SMTP server settings and make sure there are no security protocols
that need to be adjusted through your email provider’s setup options.
Local/Remote Access Log In Setup (Account Setup)
Local/Remote access lets the user access VAM’s menus directly via the
Internet when away from home. The home router must first be configured for
port forwarding. Refer to the router’s instructions for details on port
forwarding.
You can assign up to five user logins.
To set up a remote access log in, do the following:
1. Press Setup > Account.
2. Enter the desired user name and password.
Passwords must be a minimum of 8 alphanumeric characters, and must
include at least one uppercase letter, one lowercase letter, and one number.
3. Press Enable local access authentication, which enables the VAM to
require a username and password from an internal LAN (Local Area
Network) access.
NOTE: “It is recommended this option is enabled.” If this option is not
enabled any persons with a smart device can access the VAM’s webserver
by typing in the IP Address.
4. Press Save. The new user is displayed.
To clear a user’s login, press CLEAR.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results