Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
25
Creating Scenes in Total Connect
Use the Automation section of the Dashboard in Total Connect to create up to
20 scenes. Refer to the Total Connect Online Help Guide for further details
and device limitations for creating an automation scene.
1. Access the Total Connect account and navigate to the Automation module.
Press Create New > enter a name for the scene > Select a Device > press
the check boxes for the various device actions desired for that scene. Set
the thermostat, if used, to the desired mode and/or temperature for that
scene. Press Save when done.
2. After scenes have been created, follow the Total Connect prompts to
synchronize the data with the VAM. Initiating a “Panel Sync is required
before scenes created in Total Connect will display in the VAM’s menus.
Viewing and Controlling Total Connect Scenes from VAM
Use the Scenes icon to display and control scenes that have been created in
Total Connect.
1. From the Main menu, press Automation and Scene Setup, then press
Remote. The screen displays a list of scenes created in Total Connect.
NOTES:
The Local icon allows you to view a list of scenes created in VAM.
Scenes created in Total Connect can be edited only via Total Connect.
2. To control a Remote scene, press or click the desired scene > press the
appropriate action (ex. Run).
Enabling Devices for Total Connect
1. From the Main menu, press Setup > System > TC Server.
2. Press TC Enable; the Z-Wave Device Management for Total Connect
screen is displayed.
3. Select the device(s) that you want to enable/disable in Total Connect.
NOTE: Devices are defaulted to Enable.
4. Press Save when done.
After devices have been enabled for Total Connect, follow the Total Connect
prompts to synchronize the data with VAM. Syncing is required before the
enabled devices will display in Total Connect.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results