Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
23
Show Zones
Icons
Show Zones
Clear
Refresh Data
Bypass
Selected
Distressed Zones
1. Press SECURITY > SHOW ZONES.
2. Choose the zone(s) to be bypassed and press BYPASS SELECTED.
3. Enter your valid 4-digit user code.
4. Press BACK to return to the “Arming” screen, and then arm the system in
the desired arming mode.
How to Clear Bypassed Zones
For some control panels, a bypassed zone is automatically unbypassed when
you disarm the system. Ask your installer if this is active for your system.
You can also manually remove the bypass as follows:
1. Press SHOW ZONES.
2. Press CLEAR.
3. Enter your valid 4-digit user code. The system should now be Ready to
Arm.
NOTE: If the system is armed and you unbypass a zone, it disarms the
system. If zones are still faulted (not ready) the system will indicate the
status as “Not Ready Fault.”
Console Emulation Mode
Console Emulation Mode allows you to use the web browser as a keypad
interface just as you would a regular system keypad. All commands shown in
Console Emulation mode can be performed from a standard alpha keypad.
NOTES:
It is recommended that you do not use Console Emulation Mode to enter
GOTO commands, because unsatisfactory operation may result.
2-button panic keys (1 & *, 3 & #, and * & #) do not function in the Console
Emulation Mode. The A, B, C, and D buttons do function if programmed as
panic keys. Check with your system installer for details.
How to Enter Console Emulation Mode
To start Console Emulation Mode, do the following:
1. From the Home screen, press SECURITY > CONSOLE MODE.
2. Perform functions as you would from a standard alpha keypad.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results