Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
22
If armed in AWAY mode
1. When you enter the premises, the Entry Delay Active message appears.
2. Enter your valid 4-digit user code. The system disarms.
If armed in STAY or NIGHT mode
1. Select Disarm.
2. Enter your valid 4-digit user code. The system disarms.
Steps to Disarm Multi-Partitions
1. Press Security > Arm Multi-Partition > Disarm.
2. Enter your valid 4-digit user code.
3. Highlight the partition(s) to disarm and press OK, or press ALL to disarm
all partitions.
How to Display Faults (Zones)
If the system shows the “Not Ready Fault” message, it means a zone or zones
are open (faulted). Zones must be closed or bypassed before you can arm the
system.
Distressed Zones
Icons
Alarm
Trouble
Fault
LoBat
Bypass
All
To display the open zone(s), do the following:
1. Press Security > SHOW ZONES.
2. Press DISTRESSED ZONES > FAULT.
A listing of faulted zones is displayed. As applicable, take corrective action
such as closing a window or door to correct the fault.
3. If the fault cannot be corrected, you may choose to bypass the zone by
selecting the zone, then pressing BYPASS. Refer to the How to Bypass
Zones” section for more details on bypassing zones.
How to Bypass Zones
The Bypass function is used when you want to arm your system with one or
more zones left open. Bypassed zones are unprotected and do not cause an
alarm when violated while your system is armed. Limits apply as to how
many zones can be bypassed at one time. See your installer for these limits.
Some systems do not allow you to bypass fire, carbon monoxide or emergency
zones. On certain fire control systems, a specified user may be allowed to
bypass fire, carbon monoxide and system zones if the user was enabled by
your system installer.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results