Honeywell VAM manual

Honeywell VAM
9.2 · 1
PDF manual
 · 40 pages
English
manualHoneywell VAM
21
Steps to Arm the System
Arming the system in any mode is performed in the same way.
NOTE: Close all perimeter windows and doors before arming and make sure
the system is “Ready to Arm.” Or, bypass zones you want left open to make
the system Ready to Arm.
1. From the “Home” screen, select SECURITY.
2. Choose the desired arming mode. You may be prompted to enter your user
code.
Note: If the installer enables the Quick Arming feature pressing Arm
Away/Night/Stay will not be prompted to enter a user code.
3. The screen displays the exit delay countdown. When exit delay expires, the
screen displays "Armed."
Arming Multiple Partitions
NOTES:
Some systems may not have multiple partitions. In addition, your code
must be authorized to arm multiple partitions.
Mobile view cannot be used to arm multiple partitions. Mobile view can
control only the partition the VAM was assigned to when installed.
1. From the “Home” screen, press Security > Arm Multi-Partition.
2. Choose the desired arming mode.
3. Enter the user code authorized to access other partition(s).
4. Select the partition from the list on the screen, and press OK.
5. If desired, select ALL to arm all partitions listed.
Steps to Disarm the System
IMPORTANT: If you return to your home or business and the main
burglary sounder is on, DO NOT enter the premises, but call the police
from a nearby safe location. If you return to your home or business after
an alarm has occurred and the main sounder has shut itself off, the
keypad beeps rapidly upon entering, indicating that an alarm has
occurred during your absence. LEAVE IMMEDIATELY and CONTACT
THE POLICE from a nearby safe location.

Manual

View the manual for the Honeywell VAM here, for free. This manual comes under the category smart home and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Honeywell VAM or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Honeywell and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
D
Dave NuckollsFebruary 1, 2022

After power loss restored, wall light switch isn't working. Flashing Blue Light

Honeywell VAM specifications

Below you will find the product specifications and the manual specifications of the Honeywell VAM.

General
BrandHoneywell
ModelVAM | VAM
Productsmart home
LanguageEnglish
FiletypeUser manual (PDF)
Weight & dimensions
Width209.6 mm
Height152.4 mm
Depth12.7 mm
Ports & interfaces
Connectivity technologyWireless
Wi-FiYes
Ethernet LAN-
Z-WaveYes
USB ports quantity0
Design
Product colorBlack
Control typeButtons, Touch
Display
Built-in displayYes
Power
Input voltage12 V
Performance
Mobile operating systems supportedAndroid, iOS
CompatibilityVISTA, Z-Wave devices, IP cameras
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell VAM below.

What is the height of the Honeywell VAM?

The Honeywell VAM has a height of 152.4 mm.

What is the width of the Honeywell VAM?

The Honeywell VAM has a width of 209.6 mm.

What is the depth of the Honeywell VAM?

The Honeywell VAM has a depth of 12.7 mm.

Is the manual of the Honeywell VAM available in English?

Yes, the manual of the Honeywell VAM is available in English .

Is your question not listed? Ask your question here

No results